How To

Support Overview / How To

How To

909 results
  • Where can I find replacement parts for my product?
    Replacement parts are available from authorized dealers and Service Centers. Please contact our customer service department for more information and contact details.
  • Where can I check my current heart rate?
    There are multiple ways to check your heart rate (HR) while using your headphones both in and out of workouts. On the UA Record mobile app select the UA Sync icon in the upper right hand corner of the dashboard. If your headphones are connected, they will appear under "My Apps and Devices". Tap on "UA Sport Wireless Heart Rate" and you will see your headphones settings. Your current heart rate will appear under the headphones' image. You will hear your heart rate when using the headphones during a UA Record workout with audio coaching. While using with your UA Band during a workout your HR will be shown with your workout stats and will coordinate with the HR zone LED on the Band. You also can simply tap the UA logo on the RIGHT ear bud to hear the audible voice stating your heart rate reading.
  • When you experience Bluetooth issues.
    NOTE:  LINK speakers must be set up on a WiFi network before Bluetooth can be activated. Once it is set up, you can use Bluetooth anywhere (Unless you reset the speaker and start all over with installation).

    Pairing issues with a Smartphone or Tablet:
    1. First try to restart the Bluetooth connection on your source device (Smartphone/tablet) by switching Bluetooth off and on again with a short pause in between.
    2. Forget previous paired connection (on your smartphone/tablet) in your Bluetooth settings if you once had paired with our product.
    3. Try to restart source device(Smartphone/tablet) by powering it off and on again, and after restart try to establish a Bluetooth connection to your JBL LINK device.
    4. If above does not work, then try to restart your JBL LINK device by turning it off and on again.
    5. Press and hold down the Bluetooth button on your JBL LINK device to initiate pairing mode again.
    6. Go into Bluetooth settings on your Smartphone/tablet.
    7. Perform a restart or reset if you are not able to connect after above steps.
    Back to helpful articles --> Articles overview

    JBL LINK Bluetooth specifications:
    • Bluetooth version 4.2
    • A2DP v1.3 with SBC Audio Codec.
    • AVRCP v1.5
  • When will the JBL SB 250 go into standby mode?
    If there is no activity on your JBL SB 250, it will go into standby mode after 20 minutes, and will take a couple of seconds to turn on after standby mode.
  • When will the JBL Boost TV go into standby mode?
    If there is no activity on your JBL Boost TV, it will go into standby mode after 20 minutes, and will take a couple of seconds to turn on after standby mode.
  • When will I know that there is a low Battery?
    You should hear the audible voice stating ‘low battery’ when you have about 20 minutes left of battery life left on the UA WIRELESS headphones. If you have an Apple device, you will actually be able to see the battery life in the upper right hand corner of the device next to the BT symbol.
  • When using the Device Utility app to set up my speaker, my Wi-Fi network is not appearing in the list. How can I connect to my Wi-Fi network?
    If the network does not appear, you can manually type in the network name (SSID) and password to connect.
     
  • When trying to set up my speaker with the Google Home app, I get a message that says “Device needs to be activated before setup”. How do I proceed?
    If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
     
  • When soundshift is on, I still hear music from my JBL Connected device, how come?
    Soundshift only works for the Boost TV itself, and cannot stop the other JBL Connect device. To stop the second device, press the JBL Connect button on your remote or device and they will disconnect.
  • When my connected Bluetooth device goes out of range, I cannot connect JBL Micro Wireless with a new Bluetooth device immediately.
    When a connected Bluetooth device goes out of range, the JBL Micro Wireless will try to reconnect to it for 3 minutes. After 3 minutes the Micro Wireless can connect to other Bluetooth devices again.
  • When multiple speakers are connected, can effects and audio samples from the PartyPad or Effect Lab be heard on secondary speakers?

    The answer depends on the method used for connecting the Partybox Ultimate units:

     

    Multi-Room Music (Airplay/Alexa/Google Home) - No effects or audio samples heard on secondary speaker(s).

    Stereo Mode (JBL One app) - Both effects and audio samples heard on secondary speaker.

    Multi-Speaker Connection (pressing the relevant buttons on the top panels) - No effects heard, but audio samples heard on secondary speaker(s).

    Daisy Chain (wired Aux connection) - Both effects and audio samples heard on secondary speaker(s).

  • When listening to Dolby Atmos Music, why does the volume level of the speaker seem much different than when I listen to stereo music?

    The volume level of the speaker is depends on the level of the source file itself. Some Dolby Atmos Music tracks are made to be quieter, and some louder.

< 1 ... 3 4 5 6 7 ... 77 >

Can’t find what you’re looking for?

Call Us

Call Us

To speak to our customer service specialist

1800-102-0525

Mon - Sun: 10:00 am - 7:00 pm (IST)

E-mail Us

E-mail Us

Email our customer service team
365 days, we will reply within 24 hours

Email us