How To
How To
904 results
-
If you experience any sound distortion after immersing your speaker in water, simply shake the speaker to get rid of any excess moisture and allow the speaker to completely dry. Once dry, the sound quality should return to normal.Was this helpful? Thank you for your feedback!
-
Please check that you have connected your android phone with JBL DRG before. Power off your Android phone and press the JBL DRG BT button to connect to another smartphone. If this is the case, please wait 3 minutes for JBL DRG to setup the Bluetooth connection with a new smartphone. This is because some android phones can’t send a “Disconnect” BT command to JBL DRG during power off, so JBL DRG need to wait until the Link is lost.Was this helpful? Thank you for your feedback!
-
By optimizing Bluetooth settings via the app, you can get optimized audio in different scenarios like either listening to music or watching videos.
Select between “Normal” to optimize and stabilize the connection even in the busiest areas, “Music mode” to enjoy the best sound quality for music, and “Video mode” to get the best lip-syncing when watching or gaming.
Was this helpful? Thank you for your feedback! -
The Horizon 2 does not have sleep mode functionality.Was this helpful? Thank you for your feedback!
-
You can have your own Karaoke party with your JBL Partybox. Simply connect your Microphone (only included with the Partybox On The Go) and connect your mobile device over Bluetooth, then start playing music and sing along, it is that simple!Was this helpful? Thank you for your feedback!
-
The JBL TOUR range helps you create an ideal world where you can entirely focus on your tasks.
With the JBL Tour One and Tour Pro+ TWS, you can get silent moments with SilentNow. Noise Cancelling is activated without Bluetooth, just by pressing a dedicated button on the headphones (or tapping the earbud) or controlling via the My JBL Headphones app. It also helps you save battery time.
Or get help in waking up with My Alarm, which allows sleep and wake times to be set and is controlled via the My JBL Headphones app. You can set a sleep and wake timer to gradually lower the volume of the headphones for sleep, switch into SilentNow mode for a specific amount of time and then wake you up at a specified time.
Was this helpful? Thank you for your feedback! -
An optical connection will assure better audio performance and will support Dolby Digital audio from an HDTV.Was this helpful? Thank you for your feedback!
-
An optical connection will assure better audio performance and will accept Dolby Digital audio from an HDTV. However, there are times when TV apps may not transmit audio through the digital optical output on the TV. In cases such as these, it would be necessary to use the analog AUX connection.Was this helpful? Thank you for your feedback!
-
1. Turn on both speakers.
2. Connect your device to one of the two speakers via Bluetooth.
3. Start streaming music to that speaker (for best results play music on this speaker for more than 20 seconds before proceeding with the next steps).
4. Open the JBL Portable app.
5. Allow the app to detect the single speaker playing music.
6. Once detected, press the Connect/Partyboost button on both speakers.
7. Allow the app to identify both speakers.
8. Click the Partyboost button, you will see the option for Party or Stereo, select Stereo.
Please note: Stereo Mode can only be enabled when 2 of the same speaker model are used.
For example, you will not be able to achieve Stereo Mode with a Flip 5 and Flip 6, only Party Mode.
Also, it is not possible to pair speaker models with Connect and Connect+ together, or pair to speaker models with Partyboost.Was this helpful? Thank you for your feedback! -
1. Connect the first Partyboost speaker with your phone and keep music playing (for best results play music on this speaker for more than 20 seconds before proceeding with the next steps).
2. Press the Partyboost button on the first speaker.
3. Turn on the second speaker that you want to connect in Partyboost mode.
4. Now press the Partyboost button on the second speaker.
5. After a few seconds, both Partyboost speakers should connect and play together.
It can take a few seconds after music is started before sound will be heard from both speakers.
This is also the process for connecting more than two speakers in Party mode, simply turn on the other compatible speakers and press the Partyboost buttons.
Was this helpful? Thank you for your feedback! -
If the screen appears dark, try repositioning the Horizon 2 for the light sensor to work to the fullest. In some positions, the Horizon 2 cannot effectively detect the ambient light level in the room.
Was this helpful? Thank you for your feedback! -
To reset the headphones, power on the headphones and plug in the USB cable into a USB charger or USB port. Paired mobile devices should disconnect and the led should be constant white. When unplugging the USB cable, the headphones will power off. When manually powering on the headphones, and the last connected mobile phone is not in range, the headphones will revert to Bluetooth Pairing mode ( blue led will blink ) after 5 seconds. Was this helpful? Thank you for your feedback! -
The JBL Connect app will be renamed as JBL Portable on the App Store and Google Play store in January 2021, it will still be possible to find the app in each store by searching for either JBL Connect or JBL Portable.Was this helpful? Thank you for your feedback!
-
To connect to a different Bluetooth device, first switch the headphones off. Now press and hold the center button on the headphone remote control for about 3-5 seconds. You should see the light blinking red/blue to indicate pairing mode, and the voice prompt should state “looking for device”. You should see "Reflect Mini 2" appear on the source's BT list. Choose that option, and wait for the voice prompt to state “connected”Was this helpful? Thank you for your feedback!
-
To skip the tracks forward, press and hold the volume up (+) button for 1-2 seconds and you will advanced to the next song. To start the current song you are listening to over, press and hold the volume down (-) button for 1-2 seconds. Please note: You can only advance to the next song be skipping forward, you cannot skip tracks backward. You can only restart the current song over by pressing the volume down (-) button.Was this helpful? Thank you for your feedback!
-
It is not possible to have Ambient Aware or TalkThru activated at the same time as Sidetone when the microphone is turned on during a call. This is the case no matter if you are using Bluetooth or the 2.4 GHz mode.
You can use Ambient Aware during a call if Sidetone is turned off. You are able to do this in both Bluetooth or the 2.4 GHz mode.
All three audio modes are activated if the microphone on your device is turned off no matter if you are using Bluetooth or the 2.4 GHz mode.
Was this helpful? Thank you for your feedback! -
QUANTUM STREAM TALK
Software Update Release Notes
------------------------------------------------------------------------
Version: 1.4.9
Release Date: January 13th, 2025
Release Media: OTA (over the air) Update via JBL QuantumENGINE
What’s New
- Zoom USB Certified
- Stability and performance improvement
Was this helpful? Thank you for your feedback! -
QUANTUM STREAM STUDIO
Software Update Release Notes
------------------------------------------------------------------------
Version: 1.4.9
Release Date: January 13th, 2025
Release Media: OTA (over the air) Update via JBL QuantumENGINE
What’s New
- Zoom USB Certified
- Stability and performance improvement
Was this helpful? Thank you for your feedback! -
QUANTUM 910
Software Update Release Notes
------------------------------------------------------------------------
Version: 3.3.0
Release Date: April 9th, 2025
Release Media: OTA (over the air) Update via JBL Quantum Engine
What’s New
- Stability and performance improvement
Was this helpful? Thank you for your feedback! -
Press and hold the Light Show & Bluetooth buttons together for > 2 seconds.
Was this helpful? Thank you for your feedback! -
A new firmware version has been released for the Pulse 4 (Version 0.5.1.0), below is a list of the improvements:
- Supports Bluetooth 5.1 profile.
- Improves the stability of stereo setup using the JBL Portable* app.
- Improves compatibility with Mac computers.
- Enhances light show synchronization with music.
- Download and install the JBL Portable* app from the Google Play/App Store.
- Connect your Pulse 4 to your phone/tablet through Bluetooth.
- Open the JBL Portable app and wait for the Pulse 4 to appear.
- On the Pulse 4 screen, select settings (gear cog symbol).
- Proceed with installing the firmware update.
*JBL Portable is the new name for the JBL Connect app, the name will change in January 2021.Was this helpful? Thank you for your feedback! -
The intensity of the light show is dependent on the amount of audio signal being sent into the unit.
If you are experiencing a light show that doesn't move around very much, it is likely that you are not using a feature on your phone called Bluetooth Absolute Volume*. This means that the volume of your phone/tablet/device is controlled independently from the volume of the speaker.
So, if you have the Pulse 4 set to maximum volume or close to it, but the volume on your device is set at a low level, the light show will show little to no effect. All you have to do is reverse it. Turn up the volume on the device to the maximum and set the Pulse 4 to the desired volume. This will send the correct level to the speaker and the light show will show plenty of effect. This also benefits the sonic quality as well. Therefore, we recommend always having the volume on your device turned up to a high level and then adjusting the volume level on the speaker itself. This way you'll be able to enjoy the light show while also getting good audio quality. Or, if possible, setup your device for Bluetooth Absolute Volume*.
*BLUETOOTH ABSOLUTE VOLUME: Most phones/tablets/devices now use Bluetooth Absolute Volume (a.k.a. volume sync) by default. This is a feature that synchronizes the volumes of the device and the speaker, and allows the speaker volume to be controlled by changing the volume on either the device or the speaker. The volume being sent from the device is fixed at full volume.Was this helpful? Thank you for your feedback! -
Reset the Soundbar by the same process as when doing "reset remote settings": 1. Switch the SB 350 ON. 2. Press and hold the Surround and Volume (–) buttons simultaneously for about 3-4 seconds, then let go. The Source selection Button flashes amber, followed by the power button and source buttons flashing several times. 3. The soundbar is now reset.Was this helpful? Thank you for your feedback!
-
To increase battery life on your Quantum headphones, turn off your RGB lighting as this will help increase the wireless playback time. You can turn off the RGB in the QuantumENGINE or press and hold the mute button on the headset.Was this helpful? Thank you for your feedback!
-
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. If you are attempting to pair to a different device, make sure headphones are turned on, and press and hold the Bluetooth button located at the bottom of the right ear cup. The headphone should display on your new device within 3-5 seconds on your list of discoverable devices.Was this helpful? Thank you for your feedback!
-
Press and hold the power button located on the RIGHT ear cup. Make sure that the device is on and in Bluetooth range. If this is the first time connecting the device, it will automatically go into pairing mode. You will notice the LED light alternate between blue and white as it searches for a device to connect to. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect.Was this helpful? Thank you for your feedback!
-
The compatibility for JBL Quantum models on PlayStation 5 is the same as it is for PlayStation 4 models.
All JBL Quantum headset models work through 3.5mm audio jack (aux) connected to the PlayStation controller. USB models will also work on PlayStation. In addition, the wireless models works wirelessly when connected to the 2.4GHz USB dongle.
Please note: JBL QuantumENGINE is only available on PC. Custom lighting can be set up on PC, and will carry over when connected with USB cable or 2.4GHz USB dongle.Was this helpful? Thank you for your feedback! -
This product supports up to 10 hours of audio playtime. Please note that battery life may vary depending on volume level and content.Was this helpful? Thank you for your feedback!
-
The JBL Quantum 200 is compatible with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.
Was this helpful? Thank you for your feedback! -
The JBL Quantum 100 is compatible with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
To speak to our customer service specialist
1800-102-0525
Mon - Sun: 10:00 am - 7:00 pm (IST)
WhatsApp Us
Chat with a support agent via Whatsapp at:
by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446
Mon - Sun: 10:00 am - 7:00 pm (IST)