How To

Support Overview / How To

How To

274 results
  • Manually Connecting
    The Left and Right bud should sync together automatically when removed from the case. If the Left and Right bud do not sync together automatically within 15 seconds, you may manually sync the buds together. With the buds out of the case, press the center button on each bud 3x. This action does not have to be done simultaneously. You may start with either the L or R bud to initiate syncing.
  • Learn how to troubleshoot when you can’t connect your Google Assistant device to your home Wi-Fi network.

    The Checklist

    Let us walk-through a list of things needed to ensure every requirement is met.

    1. Check your mobile device if that is able to connect to same Wireless network.
    2. Make sure you are within range of your Wireless router.
    3. Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
    4. Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
      1. You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
      2. You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
    5. Try using a different mobile device, if you have one.
    6. Reboot your Wireless network router and your mobile device.
    Watch the video below for help with setting up your Google Assistant device.

    Wireless Network Extender

    Some houses or apartments can be too big for one Wireless network router to cover it all.
    Let's talk about the issues that might appear with an Extender network.

    1. Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
    2. Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
    3. Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
    4. To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
    5. In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).

    One Wireless Network Name (SSID)

    1. You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
    2. If the JBL LINK device is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
    3. To solve this issue, using two different name for your extended network will help with the performance of the JBL LINK Speaker and Google Assistant request.







     

  • JBL Quantum ONE and Quantum TWS: How do I clean my headset?
    You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.
  • JBL QuantumENGINE Features

    You can adjust Equalizer, Spatial Sound, RGB LED effects, change microphone settings and update the headset's firmware

  • JBL Portable App: PC Information
    You cannot download the JBL Portable App on a PC. This app is only available on mobile devices.
  • JBL Free: Volume Control
    The JBL Free X does not feature volume control. In order to adjust the volume, you must manually increase/decrease from your device.
  • JBL Free: Manual Re-pairing to Bluetooth Devices
    In the event that ear pieces do not re-pair automatically to paired Bluetooth device, power off ear pieces individually by press and hold the buttons for 5 seconds. To enter Bluetooth pairing mode when ear pieces are powered off, press and hold on buttons of both earpieces for 8 seconds. Re-pair the right ear piece with desired Bluetooth device when LED indicator on right ear piece alternates between blue and white LED lights.
  • JBL Free: Manual Re-pairing Left & Right Ear Pieces
    In the event that left and right ear piece pairing is lost, power on both ear pieces and press the buttons 3 times on each ear piece to initiate re-pair.
  • JBL Free: Handsfree calls
    The JBL Free automatically switches from stereo to mono when making or taking phone calls. Voice calls will only come through the right ear piece for a more natural call experience.
  • JBL Free: Charging Information
    When you place the two Free earphones in the charging case, you will see a white led ring light up on both of them. At the same time, some of the four dot-leds on the charging case will light up to indicate the battery level of the case battery. When the earphones are fully charged, the white led ring goes out on each of them. When both are fully charged, the charging case charging level leds go out too.
  • JBL DRG is too big to plug into OBD II port in my vehicle
    Please use an OBD II extension cable in this case. An extension cable is not included in the package but they are readily available for purchase on-line.
  • JBL DRG doesn’t generate engine sound in my car.
    Please check with your car manufacturer to ensure your car supports CAN or K-line. JBL DRG only works with CAN and K-line to get the engine data for engine sound simulation. If your car does support CAN or K-line, please launch the JBL DRG app and check the engine sound volume bar (the right column with button marked with “E”) in the “Sound Mode” section to make sure it is not turned off.
< 1 ... 9 10 11 12 13 ... 24 >

Can’t find what you’re looking for?

Call Us

Call Us

To speak to our customer service specialist

1800-102-0525

Mon - Sun: 10:00 am - 7:00 pm (IST)

E-mail Us

E-mail Us

Email our customer service team
365 days, we will reply within 24 hours

Email us
message

WhatsApp Us

Chat with a support agent via Whatsapp at:
by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446 

Mon - Sun: 10:00 am - 7:00 pm (IST)