JBL Live 650BTNC
Product Specifications
General Specifications
| Bluetooth version | 4.2 |
|---|---|
| Driver size (mm) | 40.0 |
Audio Specifications
| Driver sensitivity at 1kHz/1mW (dB) | 100 dBSPL@1kHz/1mW |
|---|---|
| Dynamic frequency response range (Hz) | 20Hz - 20kHz |
| Impedance (ohms) | 32.0 |
| Number of drivers per ear | 1.0 |
Dimension Specifications
| Weight (g) | 249.0 |
|---|---|
| Weight (oz) | 9.14 |
Control Connect Specifications
| Bluetooth profiles | HFP v1.6, A2DP V1.3, AVRCP V1.5 |
|---|---|
| Bluetooth frequency | 2.402GHz-2.48GHz |
| Bluetooth transmitted modulation | GFSK, _x001A_/4DQPSK, 8DPSK |
| Bluetooth transmitter power | 0-4 dbm |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery
Videos
What’s in the Box
- 1 x JBL Live 650BTNC
- 1 x Charging Cable
- 1 x Aux Cable
- 1 x Carrying Pouch
- 1 x Quick Start Guide / Safety Sheet
- 1 x Warranty / Warning
FAQs & How-Tos
-
Power and Pairing Information
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. If you are attempting to pair to a different device, make sure headphones are turned on, and press and hold the Bluetooth button located at the bottom of the right ear cup. The headphone should display on your new device within 3-5 seconds on your list of discoverable devices.
Was this helpful? Thank you for your feedback!
-
Multi-Point Connection Support
This product features Multi-Point Connection which allows you to be connect to two devices at the same time. Effortlessly switch from listening to music on your portable device to a call from your phone.
To connect to two devices at the same time:
1. Power on your product.
2. Make sure that the device you wish to connect to has the BT settings on and within range.
3. If this is the first time connecting your product, you will notice a flashing LED to indicate that it is searching for a device to connect to. (If this is not your first time, your product will automatically reconnect to the last device it was connected to)
4. Under your BT settings, go to discoverable devices and the product name should pop up within a few seconds. Depending on the device you are using, you may have to tap on the product to complete the connection.
5.Now that you are connected to the first device, push the BT button on the product to connect to the second device. The product should start searching for the second device by displaying a flashing LED.
6. Go to your BT settings on your second device. The product should pop up on your discoverable devices should pop up within a few moments.
(Please Note: If the product does not show up on your discoverable devices while it is in pairing mode, quickly turn off your BT settings and turn it back on. This will typically result in resetting the BT search in which your product should pop up on discoverable devices within a few moments)
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
To speak to our customer service specialist
1800-102-0525
Mon - Sun: 10:00 am - 7:00 pm (IST)
WhatsApp Us
Chat with a support agent via Whatsapp at:
by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446
Mon - Sun: 10:00 am - 7:00 pm (IST)