JBL E55BT
Product Specifications
General Specifications
| Ear cushion material | PU Leather |
|---|---|
| Driver size (mm) | 50.0 |
Audio Specifications
| Driver sensitivity at 1kHz/1mW (dB) | 96dB |
|---|---|
| Dynamic frequency response range (Hz) | 20 Hz - 20 kHz |
| Impedance (ohms) | 32.0 |
| Number of drivers per ear | 1.0 |
Dimension Specifications
| Headphone cable length (cm) | 133.4 |
|---|---|
| Headphone cable length (ft) | 4.4 |
| Weight (g) | 231.6 |
| Weight (oz) | 8,17 |
Control Connect Specifications
| Bluetooth profiles | HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.4 |
|---|---|
| Bluetooth frequency | 2.402GHz-2.48GHz |
| Bluetooth transmitted modulation | GFSK,π/4DQPSK, 8DPSK |
| Bluetooth transmitter power | 0-4 dbm |
| Bluetooth version | 4.0 |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery
Videos
What’s in the Box
- 1 x Pair of E55BT headphones
- 1 x Detachable cable
- 1 x Charging cable
- 1 x Quick start guide
- 1 x Warning card
- 1 x Warranty card
- 1 x Safety sheet
FAQs & How-Tos
-
How do I turn off my E45BT or E55BT?
The on/off button is a spring-loaded slider button. Press the button upwards against the spring pressure, and hold it there for about three seconds. Now you will hear the "off" prompt sound in the headphone speakers, and the LED light goes out. Now the headphones are switched off. Please note that if you do not play music or press any button for about 10 minutes, the headphones will switch off automatically.
Was this helpful? Thank you for your feedback!
-
How do I see when my JBL E45BT or E55BT is fully charged?
While charging, the charging indicator diode is lighting constantly. When charging is complete, the light goes out.
Was this helpful? Thank you for your feedback!
-
Multi-Point Connection Support
This product features Multi-Point Connection which allows you to be connect to two devices at the same time. Effortlessly switch from listening to music on your portable device to a call from your phone.
To connect to two devices at the same time:
1. Power on your product.
2. Make sure that the device you wish to connect to has the BT settings on and within range.
3. If this is the first time connecting your product, you will notice a flashing LED to indicate that it is searching for a device to connect to. (If this is not your first time, your product will automatically reconnect to the last device it was connected to)
4. Under your BT settings, go to discoverable devices and the product name should pop up within a few seconds. Depending on the device you are using, you may have to tap on the product to complete the connection.
5.Now that you are connected to the first device, push the BT button on the product to connect to the second device. The product should start searching for the second device by displaying a flashing LED.
6. Go to your BT settings on your second device. The product should pop up on your discoverable devices should pop up within a few moments.
(Please Note: If the product does not show up on your discoverable devices while it is in pairing mode, quickly turn off your BT settings and turn it back on. This will typically result in resetting the BT search in which your product should pop up on discoverable devices within a few moments)
Was this helpful? Thank you for your feedback!
-
How can I reset my JBL headphones?
With the headphones switched ON, press and hold the Volume + and Volume - buttons for more than 5 seconds. The LED blinks two colors, and now you have reset to factory settings.
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
To speak to our customer service specialist
1800-102-0525
Mon - Sun: 10:00 am - 7:00 pm (IST)
WhatsApp Us
Chat with a support agent via Whatsapp at:
by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446
Mon - Sun: 10:00 am - 7:00 pm (IST)