JBL Tune 600BTNC
Wireless, on-ear, active noise-cancelling headphones.
Sold from 2018 until now
Getting started with your JBL Tune 600BTNC
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Driver size (mm)
- 32.0
- Driver sensitivity at 1kHz/1mW (dB)
- 100dB
- Dynamic frequency response range (Hz)
- 20 Hz - 20 kHz
- Impedance (ohms)
- 32.0
- Number of drivers per ear
- 1.0
- Weight (g)
- 173.0
- Weight (oz)
- 6.1
- Bluetooth profiles
- HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.5
- Bluetooth frequency
- 2.402GHz-2.48GH
- Bluetooth transmitted modulation
- GFSK, /4DQPSK, 8DPSK
- Bluetooth transmitter power
- 0-4 dbm
- Bluetooth version
- 4.1
- Charging time (hours from empty)
- 2.0
- Maximum music play time with ANC off (hours)
- 22.0
- Maximum music play time with ANC on (hours)
- 12.0
- Maximum play time (hours)
- 22.0
- Maximum talk time (hours)
- 22.0
- Bluetooth
- Yes
- Active Noise Cancelling
- Yes
- Built-in Microphone
- Yes
- Detachable Cable
- Yes
- Flat-fold design
- Yes
- Hands Free Call
- Yes
- JBL Pure Bass Sound
- Yes
- On-ear
- Yes
- Rechargable battery
- Yes
- Remote control on ear cups?
- Yes
- Speed charge
- No
- Wireless
- Yes
- China
- -
Your music, noise free
Introducing the JBL TUNE600BTNC active noise-cancelling wireless on-ear headphones, a flat-folding lightweight and compact solution for everyday use. The JBL TUNE600BTNC feature 32mm JBL drivers that helps deliver JBL Pure Bass sound. Sound that can be enjoyed without unnecessary noise for up to 12 hours wirelessly and can be fully recharged in only 2 hours. And thanks to the additional detachable cable, music can be enjoyed endlessly in wired mode, with or without Active Noise-Cancelling. Made with durable materials and designed in four fresh colors, the JBL TUNE600BTNC allow you to connect to your world quickly thanks to buttons on the ear cups that allow for easy hands-free management of calls and music.
Keep the noise out and enjoy your music.
For over 70 years, JBL has engineered the precise, impressive sound found in big venues around the world. These headphones reproduce that same JBL sound, punching out bass that’s both deep and powerful.
Wirelessly stream high-quality sound from your smartphone or tablet without messy cords.
Listen wirelessly for up to 12 hours with active noise cancelling for long-lasting fun. Recharge the battery quickly in 2 hours.
Easily control your sound and manage your calls from your headphones with the convenient three-button remote with mic.
Lightweight materials make these comfortable on your ears, and a rugged construction ensures these headphones fold and unfold perfectly over the years.
FAQs & How-Tos
8 results
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
Yes, you can activate the noise reduction circuits alone, with no connection to a source device by Bluetooth or cable. The headphones will stay on as long as there is power in the battery, which is close to 30 hours for pure NC function. Please note that there is a slight residual noise from the NC system, which will be drowned out by music playing, or by surrounding noise such as airplane noise. If you use the NC in surroundings that are near quiet to begin with, you may not get an improvement in noise level.Was this helpful? Thank you for your feedback!
-
Yes. The 600BTNC features an audio cable that you can use if you do not wish to use the headphones via wirelessly.Was this helpful? Thank you for your feedback!
-
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
In order to reset the headphones:
Long Press of volume + and volume - at the same time while the unit is on. Make sure that bluetooth is NOT on and connected to any device.
When reseting, LED will blink faster.Was this helpful? Thank you for your feedback! -
Yes, but only via cable, and noise cancelling cannot be activated meanwhile. Since the charging socket is located on top of the ear pod, adjustment is limited in that direction while the micro-USB plug is inserted.Was this helpful? Thank you for your feedback!
-
No. The 600BTNC headphone does not feature any IPX rating that protects it against sweat or water. Over exposure to water can compromise the controls on the headphones.Was this helpful? Thank you for your feedback!
-
This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
To speak to our customer service specialist
1800-102-0525
Mon - Sun: 10:00 am - 7:00 pm (IST)
