UA Sport Wireless Train – Engineered by JBL
UA Sport Wireless Train are built for the gym. SuperVent ear cushions keep them cool and dry while Under Armour grip material provides a soft feel and maximum stability. UA Train headphones elevate every rep with big, wireless JBL Charged Sound. With a simple touch of the UA logo, TalkThru technology is enabled so you can talk to your training partner or coach without having to remove the headphones. Oversized controls are easy to access during an intense training session and a 16-hour (maximum) battery with Speed Charge delivers up to an hour of playback on just five minutes’ charge. Tested and designed by athletes for durability, they’re moisture resistant and the ear cushions are hand washable. With UA Sport Wireless Train, you can get the most out of your workout.
Product Specifications
General Specifications
| Ear cushion material | UA breathe material |
|---|---|
| Driver size (mm) | 40 |
Audio Specifications
| Driver sensitivity at 1kHz/1mW (dB) | 101 |
|---|---|
| Dynamic frequency response range (Hz) | 16Hz - 20kHz |
| Impedance (ohms) | 32 |
| Number of drivers per ear | 1 |
Dimension Specifications
| Headphone cable length (cm) | 125.0 |
|---|---|
| Headphone cable length (ft) | 4.1 |
| Weight (g) | 240.0 |
| Weight (oz) | 8.5 |
Control Connect Specifications
| Bluetooth profiles | A2DP v1.3, AVRCP v1.5, HFP v1.6, HSP v1.2 |
|---|---|
| Bluetooth frequency | 2.402GHz-2.48GHz |
| Bluetooth transmitted modulation | GFSK,π/4DQPSK, 8DPSK |
| Bluetooth transmitter power | <4 dbm |
| Bluetooth version | 4.1 |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery
Videos
What’s in the Box
- 1 x Headphone
- 1 x Charge Cable
- 1 x Audio Cable
- 1 x Carry Case
- 1 x Quick start guide
- 1 x Safety Sheet
- 1 x Warranty Card
_Box-Image_Global_Side-1605x1605px.png?sw=600&sh=600&sm=fit&sfrm=png "UA Sport Wireless Train – Engineered by JBL - What's in the Box")
FAQs & How-Tos
UA Train Headphones: Call Information
To receive a call, press the center button located in between the volume- and volume+ button for 1 second.
Was this helpful?
Thank you for your feedback!
UA Train Headphones: Ear Pad Information
Yes, The UA Train ear cushions can be removed and washed. To remove the ear cushions, peel cushion away from ear cup center. Hand wash the ear cushions only with liquid soap for 5 minutes. Swish in soapy water, then swish through clean water until there are no more soap suds. Wait for ear cushions to fully dry, and gently stretch the cushion, inserting the cushion ring into the ear cup slot, and working your way around. Rotate until the L or R indicator is in the correct position.
Was this helpful?
Thank you for your feedback!
UA Train Headphones: TalkThru Technology
Talk Thru technology allows you to clearly hear others for quick conversations without removing your UA Train headphones. To activate TalkThru mode, press the UA logo on the RIGHT ear for 1 second. You will hear your music level lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the UA logo again. (Please note TalkThru does not function when using cable connection.)
Was this helpful?
Thank you for your feedback!
Do the UA Train headphones support AptX low latency?
No. UA Train does not support AptX™ and AptX HD™ audio codecs.
Was this helpful?
Thank you for your feedback!
Can you activate SIRI on the UA Train headphones?
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.
Was this helpful?
Thank you for your feedback!
How do I know if the headphones are fully charged on the UA Train headphones?
As the headphones are charging, you will see a red solid light indicator at the bottom LEFT ear cup. Once the unit is fully charged, the red light will turn off.
Was this helpful?
Thank you for your feedback!
Does the US Train feature an audio cable?
Yes. The UA Train features a detachable audio cable with a one button remote. (Please note: you cannot use bluetooth or TalkThru when using the cable connection.)
Was this helpful?
Thank you for your feedback!
How do you power on and pair the UA Train headphones?
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.
Was this helpful?
Thank you for your feedback!
Are the UA Train headphones waterproof?
UA Train features an IPX4 rating which offers protection from a splash of water in any direction for at least 5 minutes. They cannot be fully submerged in water.
Was this helpful?
Thank you for your feedback!
UA Train Headphones: Charging Information
To use the headphones, they cannot be charging. You should receive 16 hours of battery life. The UA Train also features the quick charge battery which allows you to receive 1 hour of battery life after charging for 5 min.
Was this helpful?
Thank you for your feedback!
How do you skip tracks on the UA train headphones?
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
To speak to our customer service specialist
1800-102-0525
Mon - Sun: 10:00 am - 7:00 pm (IST)
WhatsApp Us
Chat with a support agent via Whatsapp at:
by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446
Mon - Sun: 10:00 am - 7:00 pm (IST)