


JBL Free X
Product Specifications
General Specifications
Ear tip material | Silicon |
---|---|
Driver size (mm) | 5.6 |
Audio Specifications
Driver sensitivity at 1kHz/1mW (dB) | 96 |
---|---|
Dynamic frequency response range (Hz) | 10 Hz – 22 kHz |
Number of drivers per ear | 1 |
Dimension Specifications
Weight (g) | Total: 99g |
---|---|
Weight (oz) | Total: 3.5oz |
Control Connect Specifications
Bluetooth profiles | A2DP 1.3, AVRCP 1.5, HFP 1.6 |
---|---|
Bluetooth frequency | 2.402 – 2.480GHz |
Bluetooth transmitted modulation | GFSK, π/4DQPSK, 8DPSK |
Bluetooth transmitter power | 0 - 9.5dbm |
Bluetooth version | 4.2 |
Documents & Downloads
Quick Start Guide
Gallery








Videos
What’s in the Box
- 1 x JBL Free headphones
- 1 x Micro USB charging cable
- 3 x sets of silicone ear tips (S, M, L)
- 2 x sets of gel sleeves (M, L)
- 1 x Charging case
- 1 x Quick Start Guide
- 1 x Safety sheet
- 1 x Warranty
- 1 x Warning sheet

FAQs & How-Tos
-
JBL Free: Handsfree calls
The JBL Free automatically switches from stereo to mono when making or taking phone calls. Voice calls will only come through the right ear piece for a more natural call experience.
Was this helpful? Thank you for your feedback!
-
JBL Free: Manual Re-pairing to Bluetooth Devices
In the event that ear pieces do not re-pair automatically to paired Bluetooth device, power off ear pieces individually by press and hold the buttons for 5 seconds. To enter Bluetooth pairing mode when ear pieces are powered off, press and hold on buttons of both earpieces for 8 seconds. Re-pair the right ear piece with desired Bluetooth device when LED indicator on right ear piece alternates between blue and white LED lights.
Was this helpful? Thank you for your feedback!
-
Is Volume Control Supported?
This headphone does not feature volume control. You must manually control volume from your device.
Was this helpful? Thank you for your feedback!
-
JBL Free: Manual Re-pairing Left & Right Ear Pieces
In the event that left and right ear piece pairing is lost, power on both ear pieces and press the buttons 3 times on each ear piece to initiate re-pair.
Was this helpful? Thank you for your feedback!
-
JBL Free: Volume Control
The JBL Free X does not feature volume control. In order to adjust the volume, you must manually increase/decrease from your device.
Was this helpful? Thank you for your feedback!
-
JBL Free: Charging Information
When you place the two Free earphones in the charging case, you will see a white led ring light up on both of them. At the same time, some of the four dot-leds on the charging case will light up to indicate the battery level of the case battery. When the earphones are fully charged, the white led ring goes out on each of them. When both are fully charged, the charging case charging level leds go out too.
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
To speak to our customer service specialist
1800-102-0525
Mon - Sun: 10:00 am - 7:00 pm (IST)