Studio 270

Studio 270

3-way 6.5” Floorstanding Loudspeaker

Sold from 2013 until now

Getting started with your Studio 270

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Type
3-way 6.5" Floorstanding Loudspeaker
Maximum Recommended Amplifier Power
20 – 200W
Frequency Response
45 Hz – 22 kHz
Nominal Impedance
8 Ohms
Sensitivity
88 dB
Height (in)
39-3/4
Width ( in)
9-5/16
Depth (mm)
244
Depth (in)
9-5/8
Height (mm)
1010
Weight (lb)
35.6
Weight (kg)
16.1
Width (mm)
237
Connector Type
Dual gold-plated binding-post speaker terminals with bi-wire capability
Low-Frequency Transducer
165mm (6.5") PolyPlas low-frequency transducer
High-Frequency Transducer
25mm (1") CMMD® Lite high frequency dome
Midrange Transducer
Single 100mm (4") PolyPlas midrange transducer

The standing ovation your floor’s been waiting for

Rising tall over other loudspeakers We knew it was time again for us to redefine the future of sound. That’s why we designed a new floorstanding loudspeaker that reaches far beyond what competitors can only grasp at: our new JBL® Studio 270 3-way floorstanding loudspeaker. As part of the new 10-piece JBL Studio 2 loudspeaker series, the Studio 270 was built to take legacy sound and forward-thinking technology up into unproven heights. Tested relentlessly in the world’s most advanced sound research lab – our own – as well as pitted against competitors in real world comparative listening studies, we achieved just that. We constructed front-firing 4” and 6.5” PolyPlas drivers and a rear-firing Slipstream bass port that encompass your senses in tight, accurate bass. But we knew that wasn’t far enough.We went further, inspired by our work in building the world’s most legendary recording studios, giving our Studio 270 the kind of tech that makes for premium cinema-grade listening: a 1” CMMD® Lite high-frequency driver that ensures low-distortion, and a High Definition Imaging (HDI) waveguide design that offers pinpoint sound imaging and firm natural balance. We braced its interior edge-to-edge to minimize any cabinet flexing, and eliminate bass distortion. Then we capped it with exclusive features like gloss black paneling, soft rounded edges, and your choice of either Black or Espresso woodgrain finish. For those able to see and hear the truth, we’re confident you’ll know it – full volume – at first look and first listen.

Decades of JBL acoustic research and developmenthave made their imprint. With its 4” and 6.5” PolyPlas front-firing drivers delivering unrivaled midrange accuracy and power, we’ll let a masterpiece speak for itself.
The apex of 67 years of pioneering sound research at our JBL labs, the Studio 270 includes groundbreaking innovations like a High Definition Imaging (HDI) waveguide design and a 1” CMMD® Lite high-frequency driver in its framework. Together, these advances let you experience your sound purely and cinematically,with all its precision imaging, high-frequency detail, natural balance, and full spectrum mastery.
The JBL way is to make it look as good as it sounds. And with the Studio 270, we’ve made no exception. With 21st century elegance that incorporates soft-rounded edges, black gloss paneling, and soft-touch paint, we’ve built something that seduces the eye as much as it commands the ear.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: 021-42871228

Jakarta, 021-26538568 Extension 1290/1292

Bandung,  022-4215995

Surabaya,  031-5355111

Makassar,  0411-448381

Bali,  0361-4990480361-499035

Mon - Fri - 9:00 a.m 5:00 p.m

Sat: 9:00 a.m 1:00 p.m