Support Overview / Speakers / Stereo & Surround Speakers / Floorstanding / Studio 190
Studio 190

Studio 190

400-watt, three-way, dual 6-1/2" floorstanding loudspeaker

Sold from 2010 until now

Getting started with your Studio 190

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Wall-Mount Capable
No
Finish
Black
Series
Studio 1 Series
Type
3-1/2-way dual floorstanding
Maximum Recommended Amplifier Power
200W
Nominal Impedance
8 ohms
Sensitivity
(2.83V@1m) 90dB
Power Handling (Peak)
400 watts
Crossover Frequencies
800Hz, 3.2kHz, 6dB/octave
Frequency Response
(-3dB) 40Hz – 22kHz
Power Handling (Recommended)
100 watts
Width (in)
7-7/8
Weight (kg)
22.1
Height (mm)
1121
Depth (mm)
375
Width (mm)
200
Height (in)
44-1/8
Depth (in)
14-3/4
Weight (lb)
48.8
Midrange Transducer
4" (100mm) PolyPlas cone, magnetically shielded
High-Frequncy Transducer
1" CMMD Lite dome, magnetically shielded, in a Bi-Radial constant directivity waveguide
Low-Frequency Transducer
Two 6-1/2" (165mm) PolyPlas cones, magnetically shielded

Fill your room with vibrant sound.

The JBL® Studio 190 floorstanding loudspeaker lets you experience deep, resounding low frequencies, a fully detailed midrange and complex high-frequency sound, whether you play it at low and subtle or high, maximum-SPL playback levels. The Studio 190’s sound waves feel tangible, as if you could pick individual notes out of the air. The secret to the Studio 190’s exceptional performance lies in its advanced materials, with PolyPlas™ cones for the pair of low-frequency woofers and the single midrange driver, and a CMMD® Lite dome for the high-frequency tweeter. The result is reduced distortion and the virtual elimination of unwanted resonance, while precise cone movement maximizes the sound clarity, especially on voices. And the Studio 190 features a cabinet design that looks as alluring as it sounds. Featuring a signature JBL Weave design, the Studio 190 can stand out or blend in. It’s your choice.

JBL engineers designed the Studio 190 floorstanding loudspeaker to deliver enhanced, room-filling sound from a compatible AVR (audio/video receiver) or 25- to 400-watt power amplifier, whether you are using the Studio 190 as a stand-alone unit or as part of a surround-sound system.
The Studio 190 delivers powerful, resounding bass from a pair of PolyPlas 6-1/2-inch (165-millimetre) woofers. The ribbed construction improves strength while reducing distortion, filling a room with deep, resonant bass. This lightweight alloy allows for precise movement, ensuring that bass instruments always sound powerful but never “boomy.”
Ideally, sounds should blend together within your ears, not interact with one another before they reach you. To prevent sound interference from the upper and lower frequencies, the JBL Studio 190 floorstanding loudspeaker’s 4-inch (100-millimetre) PolyPlas midrange driver features a separate sub-enclosure. And that’s not all – a lightweight alloy such as the PolyPlas material allows for precise cone movement to maximize sound clarity, especially on voices.
The CMMD high-frequency tweeter starts as an aluminium dome that is sandwiched on either side with ceramic. The result is strong enough to hold its shape when moving rapidly yet light enough to eliminate unwanted resonances. What your ears notice, however, is subtle, clear detail and lasting, unsullied sound performance.
The Studio 190’s Bi-Radial waveguide disperses high frequencies widely without loss of quality or accuracy. The result is precise, 360-degree imaging, sharp and rich high-definition (HD) sound and a wide listening position that makes every seat in the room the one to fight for.
Loudspeakers use magnets. Your TV hates magnets. But that doesn’t mean that you have to listen to movies on your television set’s often inadequate loudspeaker. Nor should you compromise your HDTV’s high-definition capabilities. JBL engineers have designed the Studio 190 floorstanding loudspeakers to form an integral part of any home theatre experience. We’ve optimized the speakers for inspired performance while making them magnetically shielded to prevent any interference with video sources.
The JBL Weave design is a perfect convergence of form and function. Whether you need your JBL Studio 190 loudspeakers blend in or stand out, we’ve designed them to look sharp and stylish in any room.

Images & Videos

Studio 190 - Black - Wide-range 400-watt 3-way Floorstanding Speaker - Hero
  • Studio 190 - Black - Wide-range 400-watt 3-way Floorstanding Speaker - Hero
  • Studio 190 - Black - Wide-range 400-watt 3-way Floorstanding Speaker - Front
  • Studio 190 - Black - Wide-range 400-watt 3-way Floorstanding Speaker - Back
  • Studio 190 - Black - Wide-range 400-watt 3-way Floorstanding Speaker - Detailshot 1

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: 021-42871228

Jakarta: 021-26538568 Extension 1290/1292
Bandung: 022-4215995
Surabaya: 031-5355111
Makassar: 0411-448381
Bali: 0361-499048, 0361-499035

Mon - Fri - 9:00 a.m 5:00 p.m
Sat: 9:00 a.m 1:00 p.m