


JBL Tune Beam
Tackle your day one song at a time with the JBL Tune Beam. These true wireless earbuds give you up to 48 hours of exceptional JBL Pure Bass Sound, while the ergonomic, water and dust resistant design gives you all-day comfort in any weather. A simple touch allows you to manage and enjoy perfect calls anywhere, without ambient noises. And with Active Noise Cancelling and Smart Ambient technology, you choose whether you want to tune out the world or engage with your surroundings. The stick-closed design ensures a secure fit, isolation from outside noise for better sound performance. Best of all, the JBL Headphones App lets you personalize your entire listening experience. Stay connected to your world, your way.
Product Specifications
General Specifications
Driver size (mm) | 6 |
---|---|
Number of Microphones | 4 |
Audio Specifications
Driver sensitivity at 1kHz/1mW (dB) | 97 |
---|---|
Dynamic frequency response range (Hz) | 20 Hz – 20 kHz |
Impedance (ohms) | 16 |
Dimension Specifications
Earbud | 5.0 g per pc (10 g combined)/0.0110 lbs per pc (0.0220 lbs combined) |
---|---|
Charging case | 50.3 g/ 0.1110 lbs |
Control Connect Specifications
Bluetooth version | 5.3 |
---|---|
Bluetooth profiles | A2DP 1.3.2, AVRCP 1.6.2, HFP 1.8 |
Bluetooth frequency | 2.4 GHz – 2.4835 GHz |
Bluetooth transmitted modulation | GFSK, π/4-DQPSK, 8-DPSK |
Bluetooth transmitter power | <13 dBm |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery











Videos
What’s in the Box
- 1 x JBL Tune Beam headphones
- 1 x Charging case
- 1 x USB Type-C charging cable
- 1 x 3 sizes of eartips
- 1 x Warranty / Warning (W / !)
- 1 x Quick Start Guide / Safety Sheet (S / i)

FAQs & How-Tos
How to Factory Reset True Wireless Stereo Earbuds
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
021-42871228
Jakarta, 021-26538568 Extension 1290/1292
Bandung, 022-4215995
Surabaya, 031-5355111
Makassar, 0411-448381
Bali, 0361-499048, 0361-499035
Mon - Fri - 9:00 a.m 5:00 p.m
Sat: 9:00 a.m 1:00 p.m