JBL Live Free NC+ TWS - White - True wireless Noise Cancelling earbuds - Hero JBL Live Free NC+ TWS - White - True wireless Noise Cancelling earbuds - Front JBL Live Free NC+ TWS - White - True wireless Noise Cancelling earbuds - Detailshot 1
JBL Live Free NC+ TWS - White - True wireless Noise Cancelling earbuds - Hero
  • JBL Live Free NC+ TWS - White - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Live Free NC+ TWS - Black - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Live Free NC+ TWS - Rose - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Live Free NC+ TWS - Blue - True wireless Noise Cancelling earbuds - Swatch Image

JBL Live Free NC+ TWS

Take on the world, with style. JBL Live Free NC+ TWS earbuds deliver JBL Signature Sound with supreme comfort. Stay in the groove all day long without noise or any distractions thanks to Active Noise Cancelling, while TalkThru and Ambient Aware keep you in touch with your friends and surroundings. Up to 21 hours of battery life and in-case wireless charging gives you seamless, convenient ease of use, and Dual Connect + Sync means you can start listening immediately, with either earphone or both. With your choice of Voice Assistant, perfect calls, and intuitive controls right at your fingertips, you’ll never need to stop the music. Water and sweat proof, the JBL Live Free NC+ TWS won't let you down no matter your activity or the weather conditions. So you can live Free.

Product Specifications

General Specifications

Ear tip material Silicon
Driver size (mm) 6.8
IP Code IPX7

Audio Specifications

Driver sensitivity at 1kHz/1mW (dB) 96
Dynamic frequency response range (Hz) 20 Hz – 20 kHz
Impedance (ohms) 16
Number of drivers per ear 1

Dimension Specifications

Charging Case Weight (oz) 1.4
Earpiece Weight (oz) 0.5
Charging Case Weight (g) 40
Earpiece Weight (g) 14

Control Connect Specifications

Bluetooth profiles A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth frequency 2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation GFSK, π/4DQPSK, 8DPSK
Bluetooth transmitter power 0 - 10dbm
Bluetooth version 5.1
Please consult the documents for in-depth specs

Documents & Downloads

Videos

What’s in the Box

  • 1 x JBL Live Free NC+ TWS
  • 1 x Type-C USB charging cable
  • 1 x 3 sizes of ear tips
  • 1 x 2 sizes of gel-sleeves
  • 1 x Charging case
  • 1 x Quick Start Guide / Safety Sheet (S / i)
  • 1 x Warranty / Warning (W / !)
JBL Live Free NC+ TWS - What's in the Box

FAQs & How-Tos

  • My JBL Headphones App Support

    This headphone is supported by the My JBL Headphones App.
  • How to Perform a Hardware Reset

    To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
    * Location
    Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
    Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
    Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.
  • Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

    If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

    Category:

    Product information
  • Waterproof Information (IPX7)

    This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png

    Category:

    Product information
  • How to Factory Reset True Wireless Stereo Earbuds

    Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • How to Turn off your TWS Headphones

    1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).

    Category:

    Troubleshooting
  • Cleaning Instructions for Re-establishing Charging

    It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.

    Category:

    Troubleshooting
  • Pairing issues with a Computer or PC

    In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.

    Category:

    Connectivity

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: Jakarta, 021-42871228, 021-26538568 Extension 1290/1292

Bandung,  022-4215995

Surabaya,  031-5355111

Makassar,  0411-448381

Bali,  0361-4990480361-499035

Mon - Fri - 9:00 a.m 5:00 p.m

Sat: 9:00 a.m 1:00 p.m