JBL REFLECT MINI 2
Lightweight Wireless Sport Headphones
Sold from 2017 until now
Getting started with your JBL REFLECT MINI 2
Quick Start Guide & Downloads
Product Specifications
- Driver size (mm)
- 5.8
- Dynamic frequency response range (Hz)
- 10Hz - 22kHz
- Impedance (ohms)
- 14.0
- Number of drivers per ear
- 1.0
- Headphone cable length (cm)
- 50.0
- Headphone cable length (ft)
- 1.64
- Bluetooth frequency
- 2.402 – 2.480GHz
- Bluetooth transmitted modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth transmitter power
- <4 dbm
- Bluetooth version
- 4.2
- Charging case battery life (max hours)
- 10
- Charging time (hours from empty)
- 2
- Maximum play time (hours)
- 10
- 3-Button Remote/ Mic
- Yes
- Carrying pouch
- Yes
- Hands Free Call
- Yes
- In-ear
- Yes
- JBL Signature Sound
- Yes
- Rechargable battery
- Yes
- Reflective cable
- Yes
- Siri/ Google Now
- Yes
- Speed charge
- Yes
- Sweat Proof
- Yes
- Wireless
- Yes
- IP Code
- IPX5
Designed for Movement. Defined by You.
Introducing a wireless headphone designed to match your love for sport with your active lifestyle. The JBL Reflect Mini 2 fits every ear shape and size with ergonomic silicone tips and patented Freebit™ enhancers, available in 3 sizes for customized comfort. Its sweatproof, lightweight aluminum design is stylish and feels effortless, while a 3-button remote and mic keeps music and calls conveniently close at hand. Its reflective cable keeps you more visible during nighttime routines. And with up to 10 hours of battery life powering signature JBL sound, you can keep moving without ever missing a beat. With the touch of a button you can conveniently manage your calls and access the voice assistant.
FAQs & How-Tos
-
No, the Reflect Mini BT does not feature the automatic shut off.Was this helpful? Thank you for your feedback!
-
With the headphones switched ON, press and hold the Volume + and Volume - buttons for more than 5 seconds. The LED blinks two colors, and now you have reset to factory settings.Was this helpful? Thank you for your feedback!
-
Press and hold the center power button that is located on the inline microphone. You will see the flashing LED blue light turn off on top of the volume increase button on the microphone.Was this helpful? Thank you for your feedback!
-
The REFLECT MINI BT lets you skip the tracks forward, by pressing and holding the volume up button for 3 seconds and skip tracks backward, by pressing and holding the volume down button for 3 seconds.Was this helpful? Thank you for your feedback!
-
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
No. There is no way to turn off the blue LED light from our wireless headphones unless they are turned off.Was this helpful? Thank you for your feedback!
-
To connect to a different Bluetooth device, first switch the headphones off. Now press and hold the center button on the headphone remote control for about 3-5 seconds. You should see the light blinking red/blue to indicate pairing mode, and the voice prompt should state “looking for device”. You should see "Reflect Mini 2" appear on the source's BT list. Choose that option, and wait for the voice prompt to state “connected”Was this helpful? Thank you for your feedback!
-
During charging, the LED lights red constantly. When it is fully charged, the LED goes out. No light.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a support agent
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat With Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)