STUDIO LC 1

STUDIO LC 1

3-Way Dual 5.25 inch Center Channel

Vendido desde 2005 hasta ahora

Producto predecesor: HT 4H
Producto sucesor: Studio 520C
Hecho en: Mexico

Documentos y descargas

Especificaciones del producto

Wall-Mount Capable
Yes
Finish
Black
Type
Center Channel Speakers
Series
Studio L
MSRP U.S.
$499.95 each
Maximum Recommended Amplifier Power
150W
Sensitivity
(2.83V@1m) 91dB
Frequency Response
55Hz – 40kHz
Nominal Impedance
8 ohms
Power Handling (Recommended)
75W
Crossover Frequencies
3000Hz, 20kHz
Power Handling (Peak)
300W
Depth (in)
10
Weight (lb)
23
Width (mm)
534
Height (in)
7-1/2
Weight (kg)
10.5
Depth (mm)
254
Width (in)
21
Height (mm)
191
Ultra High Frequency Transducer
3/4" (19mm) Mylar® Dome With Cast-Aluminum Chassis; Shielded
High-Frequncy Transducer
1" Pure-Titanium Dome With Cast-Aluminum Chassis in JBL EOS™ Waveguide; Shielded
Low-Frequency Transducer
Dual 5-1/4" PolyPlas™ Cones With Rubber Surrounds and Cast-Aluminum Chassis; HeatScape™ Motor Structures; Symmetrical Field Geometry™ (SFG™);

The LC1 center channel speaker is video shielded and features PolyPlas; woofers and a pure-titanium tweeter to deliver accurate performance with dramatically reduced distortion for incredibly realistic sound. The dual 5-1/4 inch woofers deliver clean, natural dialogue reproduction and the ultrahigh-frequency driver extends response out to 40kHz. Perfect for SACD or DVD-Audio recordings. The tweeter is mounted in our proprietary Elliptical Oblate Spheroidal (EOS;) waveguide for improved high-frequency dispersion anywhere in the listening room.

Stiffer cones deliver more uniform pistonic motion for deeper, tighter bass and improved midranges. PolyPlas™ gives maximum impact JBL® audio. You’ll experience serious, feel-it-in-your-bones bass and true sound that does justice to the artist’s original performance.
The HeatScape™ motor structure envelops the voice coil with a large ceramic magnet and steel frame that protects the voice coil by dissipating heat. This increases power handling and gives you extremely low levels of harmonic distortion.
A thin, but rigid, 1” pure titanium-laminate dome tweeter delivers accurate high frequency response, even when the volume is cranked up. A Mylar® dome makes way for open, smooth spacious sound, and a seamless transition between the middle and high frequencies.
Elliptical Oblate Spheroidal™ (EOS) waveguides, originally developed for JBL® Pro LSR studio monitors, disperse clean, high frequency sound more precisely across a wider listening area. There’s no “sweet spot.” Sit wherever you want.
By taking the shortest possible route from the input terminals to the transducers – simplifying and shortening the path – this proprietary crossover design means you hear everything your TV and music source can dish out.
A rear-firing FreeFlow™ port is acoustically matched to the woofer and moves the air from the cabinet into the room. You get extended bass response with the lowest amount of distortion, adding power to your music and excitement to your movie soundtracks.
From 55Hz to 40kHz, nothing is over- or underemphasized. You get a true, full sound range from deep bass tones to ultra-high frequencies.
With 75W of continuous power handling and 300W peak, the JBL® LC1 has a robust, muscular delivery. It uses technology derived directly from JBL® Professional studio monitors and gives your home theater audio the unparalleled spaciousness and definition it wants.
Put the JBL® LC1 anywhere that makes sense in your home theater set-up. It’s magnetically shielded for placement on the floor or wherever you want it, including right next to your TV or video display.

¿No encuentras lo que buscas?

Llámanos

Llámanos

Habla con un experto sobre nuestros productos
Llámanos a este número: 50223141399

Lunes - Viernes: 09:00 AM -06:00 PM (Hora Centro)

Envíanos un correo electrónico

Envíanos un correo electrónico

¡Estamos aquí de lunes a viernes para responder sus correos lo antes posible!

Envíanos un correo electrónico