Cinema SB400

Cinema SB400

120-watt, wireless Cinema soundbar and subwoofer

Sold from 2012 until now

Getting started with your Cinema SB400

Getting started with your Cinema SB400

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Bluetooth
Frequency response
38Hz – 20kHz
Enclosure type
Ported
Subwoofer Maximum Recommended Amplifier Power
100 watts
Speaker Maximum Recommended Amplifier Power
60 watts peak per channel
Subwoofer Weight (kg)
10.5
Subwoofer Width (mm)
329
Subwoofer Height (in)
14
Subwoofer Depth (in)
12-5/8
Speaker Width (in)
43-5/16
Subwoofer Depth (mm)
320
Speaker Depth (in)
2-1/2
Speaker Width (mm)
1100
Subwoofer Weight (lb)
23.1
Speaker Height (in)
3-3/4
Speaker Weight (kg)
3.3
Speaker Weight (lb)
7.3
Subwoofer Height (mm)
355
Speaker Depth (mm)
64
Speaker Height (mm)
95
Subwoofer Width (in)
13
System Frequency Response
38Hz – 20kHz (–6dB)
Subwoofer Power Requirement
100V – 240V, 50/60Hz, 100W
Subwoofer Low-Frequncy Transducer
One 8" down-firing cone
Speaker High-Frequency Transducer
One 1" (25mm) dome per channel
Speaker Midrange Transducer
Two 2-1/4" (57mm) cones per channel

Bluetooth­-enabled soundbar with a powerful, 200-watt wireless subwoofer.

Bluetooth¬-enabled soundbar with a powerful, 200-watt wireless subwoofer. High-definition TV is great – but what good is it if its sound doesn’t match the quality of its video? Fortunately, the JBL® Cinema SB400 system offers cinema-quality audio in a small space and high style. Its two-channel soundbar features four 2-1/4-inch (57-millimeter) woofers, two 1-inch (25-millimeter) tweeters, an amplifier that delivers up to 120 watts, integrated Bluetooth® technology for streaming music from digital devices, three HDMI® inputs and HARMAN Display Surround technology, which creates a 3D listening environment from only two channels. The system also includes a 200-watt, 8-inch (200-millimeter) wireless subwoofer with bass-boost control. The SB400 is everything that you can ask for in a sound system.

The Cinema SB400 incorporates amplifiers, controls andleft and right woofers and tweeters into a single soundbar. Its built-inamplification simplifies system connections and operation, and offers up to 120watts of power.
Nothing draws you into the action like huge bass. TheCinema SG400’s 8-inch (200-millimeter), low-frequencytransducer and built-in 200-watt amplifier deliver all of your entertainment’simpact, emotion and excitement. And because the system is wireless, it puts nounsightly cables between soundbar and subwoofer.
Movies and TV shows aren’t the only things that soundbetter with a JBL soundbar. The Cinema SB400 wirelessly streams music fromsmartphones and tablets, delivering room-filling, full-range sound reproductionwith exceptional bass.
With three HDMI inputs, the Cinema SB400 providesconvenient connection for multiple HDMI source components. It also includes oneHDMI output with Audio Return Channel (ARC), which sends the TVsound back to the soundbar. This setup simplifies switching and makes thesystem easier to use.
Drawing from HARMAN expertise in movie theater audio, theCinema SB400 lets you add cinema sound without adding multiple speakers.Employing proprietary HARMAN Display Surround technology, it creates a virtualsurround-sound experience while preserving the original audio mix in its timbreand special balance.
The Cinema SB400 decodes film soundtracks in their nativeformat, which eliminates conversion stages that reduce sound quality. Thisarrangement helps the soundbar provide a superb surround-sound experience formultiple listeners.

FAQs & How-Tos

5 results
  • We are sorry about this problem. EuP regulations require that electronics go into full off after some time. Unfortunately, this means that the soundbar cannot be woken up again after half an hour. It is necessary to use the ON/OFF switch.
  • It is usually not necessary to replace an unresponsive remote control. First, check to see if there is a small plastic tab extending out of the base of the remote control. This is a protective sleeve installed on new remote controls to prevent the battery from draining. Pull this tab to remove the plastic sleeve. The sleeve must be removed before the remote will operate. If the sleeve was removed or not present and the remote control is not working then a new battery should be installed before replacing the remote control. There is a small slide out drawer that houses the battery. The battery type will be either CR2025 or CR2032 for remotes of this size. Replacement batteries are commonly available from most electronic and convenience stores that sell small batteries. Check the number on the original battery and replace it with a battery that uses the same number. These steps will typically solve the problem.
  • First time you perform the pairing, it can take several minutes to establish connection. If more than five minutes go by with no result, please switch both units OFF and ON again.
  • With HARMAN Volume you can set your desired volume between low, medium and high. You can listen to your audio without sudden distracting changes such as blasts from ads, and volume variations as you switch between channels on your TV. Other benefits include full sound effects even at low volumes, this means if you are watching movies (DVD, BlueRay disc) and HARMAN volume is set to low volume, then the signal is more compressed, than what the other volume levels is. This will allow you to hear natural, consistent sound at low volume level, and not only hearing voice conversation from movies, giving you the same movie experience just with lower volume. What is best for you is a matter of personal preference, so we recommend playing around with the three different levels.
  • This problem is usually caused by pressing down too hard on the soundbar's VOL + or VOL - Buttons. Only press just enough for one click to be felt. If a second click is felt in the button, you are pressing too hard, and you are actually activating the MUTE function for learning, not VOL up or down. You may have to repeatedly let go of the VOL button on the soundbar, followed by pressing it again and then pressing the VOL button on the TV remote before the surround light on the soundbar lights up white and goes back to amber flashing, as a sign that this function has been learned. This is no problem, though. Just keep trying until the three commands have been learned. The soundbar only exits learning mode when you press and hold the surround button as the final step.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +44 161 222 3325

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

message

WhatsApp Us

Send us a message on +44 161 222 3325 or click  here 

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00