JBL Pulse 4
|Maximum music playing time (hrs)||12|
|Dimensions (cm)||9.6 x 20.7 x 9.6|
|Dimensions (in)||3.8 x 8.1 x 3.8|
Control Connect Specifications
|Bluetooth profiles||A2DP V1.3, ACRCP V1.6|
|Bluetooth frequency||2.402 - 2.480GHz|
|Bluetooth transmitted modulation||GFSK, π/4 - DQPSK, 8DPSK|
|Bluetooth transmitter power||≤10dBm|
Documents & Downloads
Quick Start Guide
What’s in the Box
- 1 x JBL Pulse 4
- 1 x JBL branded Type C cable
- 1 x Quick start guide
- 1 x Safety sheet
- 1 x warranty card
FAQs & How-Tos
How to avoid Bluetooth interference/interruptions:
Always have a clear line of sight between your Bluetooth device (speaker, headphones, etc.) and source device (Smartphone/tablet/PC, etc). Be aware of obstacles in front of your devices.
Try to shutdown products that have Bluetooth, but not are not being used. They are often the reason for interference even though they are not being used.
Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
Bluetooth signals cannot travel through water, which includes the human body. Make sure with Wireless Headphones to keep your Source device and the receiver on the same side of your body.
Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
Pairing issues with a Smartphone or Tablet:
First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.
"Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with our product.
Try to restart the source device(Smartphone/tablet/PC) by powering it off and on again, and after restarting try to establish a Bluetooth connection to your product.
If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.
Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.
Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.
You should now have a successful pairing with our device, but if you are still experiencing issues then contact us again.
Pairing issues with a Computer or PC:
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).
The driver (software) should support the following Bluetooth protocols, to be able to play music/sounds from your Computer/PC/Laptop:
A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, contact their support.
The standard drivers provided by Microsoft/Windows systems are often not correct, and will result in error messages (such as having to enter a PIN code), or pairing not working.
What is Bluetooth technology?
Bluetooth technology is a wireless technology that exchanges data (Music etc.) over short distances from a mobile device.
Bluetooth range depends on your surroundings (reflection from objects) and what chipset is being used (some can go 1 meter, 10 meters or 100 meters).
Our Bluetooth devices typically supports up to 10 meter distance from the source device.
Explaining the different Bluetooth profiles used in our devices:
Many of our Bluetooth devices have a specification sheet like Bluetooth Profiles Supported: A2DP v1.5/AVRCP v1.6. These are the protocols that a specific Bluetooth speaker or Headphone device is compatible with. This might look too technical for some customers, but all you need to know is that Bluetooth Speakers and Headphones they are the only ones with these profile that you need to be aware of:
A2DP – A2DP stands for ‘Advanced Audio Distribution Profile’ and is a Bluetooth protocol that allows mobile users to stream high quality (stereo or mono) audio wirelessly. If you want to listen to your music on a pair of Bluetooth headphones or speakers, both devices need to support this.
AVRCP – AVRCP stands for ‘Audio/Video Remote Control Profile' and controls remote functions such as pause/start/skip/forward.
HSP – HSP stands for ‘Headset Profile’ and is a Bluetooth profile to enable a two-way wireless Headphone to be used with a Bluetooth smartphone. In our Headphones this is one of the most common Bluetooth profiles and supports simultaneous two-way (full-duplex) audio, but it does not support stereo audio.
HFP - HFP Stands for 'Hands Free Profile'. This profile provides the same abilities as HSP does, but adds abilities such as redial last number called, voice dialing and call waiting.
Note for HSP and HFP:
You can also use it with devices other than phones, like your Computer/PC with a Bluetooth Headphone that could be used with a Bluetooth-enabled PC and VoIP software to place an Internet phone call (NOTE: some PC software requires different drivers for specific purposes like SKYPE - Always refer to the manufacturer of the PC/Laptop for help with setting this up).
Pulse 4 Firmware Version InformationA new firmware version has been released for the Pulse 4 (Version 0.5.1.0), below is a list of the improvements:
- Supports Bluetooth 5.1 profile.
- Improves the stability of stereo setup using the JBL Portable* app.
- Improves compatibility with Mac computers.
- Enhances light show synchronization with music.
- Download and install the JBL Portable* app from the Google Play/App Store.
- Connect your Pulse 4 to your phone/tablet through Bluetooth.
- Open the JBL Portable app and wait for the Pulse 4 to appear.
- On the Pulse 4 screen, select settings (gear cog symbol).
- Proceed with installing the firmware update.
*JBL Portable is the new name for the JBL Connect app, the name will change in January 2021.
My device is waterproof, but what about salt water or chlorine water?
Your JBL speaker is waterproof with IPX7 rating. (IPX7 means it can survive immersion in 1 meter/3.3 feet for up to 30 minutes.) To maintain the looks and functions of your speaker, please make sure to rinse it with fresh water after using it at a swimming pool or the ocean, then dry off all covers and areas where water can gather. The standard for waterproofing is for tap water. Chemicals and salt in your pool or the ocean can damage the waterproof seals or harm the surface finish over time if not rinsed off after use.
Setting up your PartyBoost speakers in stereo mode
1. Turn on both speakers.
2. Connect your device to one of the two speakers via Bluetooth.
3. Start streaming music content to that speaker.
4. Go into JBL Portable app.
5. Allow the app to detect the single speaker playing content.
6. Once detected, press the Connect/Partyboost button on both speakers.
7. Allow the app to identify both speakers.
8. You should now see the option for Partymode. Click it.
9. Now you will see the option for Party or Stereo. Select Stereo.
What are the differences between Partyboost and Connect+Our newest products, such has JBL Pulse 4 and JBL Flip 5, feature a new technology called Partyboost .
- Improved Bluetooth connection between speakers.
- A more powerful Bluetooth transmitter means that the speakers can be farther apart.
- Partyboost can only connect to other Partyboost speakers.
Unfortunately, this feature is not backwards compatible with previous models that have JBL Connect or Connect+.
PartyBoost support on the JBL Connect and JBL Connect+
The new PartyBoost does not support the previous Connect and Connect+ features. For example: You will not be able to successfully connect the new PartyBoost enabled Flip 5 with a Connect+ enabled speaker like the Pulse 3 or Flip 4. You will not be able to connect the Boombox 2 to the original Boombox speaker.
How to restore factory default settings on your speaker
If you wish to reset your speaker due to various reasons, then keep reading, and follow along. 1. Press and hold Volume+ & Play/pause buttons down at the same time for more than 5 seconds. 2. The Pulse 4 will turn off, indicating that you did a successful reset. 3. Switch your Pulse 4 on again. 4. Connect with your favorite Bluetooth device and enjoy the music! Do you still have problems? Contact our Customer Service for more help!
Renaming of the JBL Connect App to JBL PortableThe JBL Connect app will be renamed as JBL Portable on the App Store and Google Play store in January 2021, it will still be possible to find the app in each store by searching for either JBL Connect or JBL Portable.
JBL Portable App: PC Information
You cannot download the JBL Portable App on a PC. This app is only available on mobile devices.
Does this speaker have an Aux Input?This speaker does not have an Aux Input, so no analog connection is possible.
How to clean the glass and deviceSo your Pulse 4 got dirt on it, or even fingerprints, and you want to show off the device the best way possible.
Keep reading this article, and we will instruct you on how to clean the glass and device.
How to clean your speaker
- Dirt and stains on your speaker can be cleaned under lukewarm running tap water.
- Use a soft cloth, preferably cotton, to clean the glass and to remove fingerprints. Hold the top part to avoid adding more prints to the glass part.
Contact our Customer support for more help and advice to keep your speaker top-notch!
Speaker Phone InformationThis model does not feature an internal speaker phone and cannot be used for phone calls or other VoIP systems.
Issues with the JBL Portable App and your Android device
There might be several reasons that our Portable app may not be working correctly on your Android device. First, your Android device must have 5.0 OS (Operating system) or higher to support JBL Connect app. Devices under 5.0 OS will not be supported. If you are having trouble viewing your JBL Portable device in the app, please disable Bluetooth, and then turn it back on again. Now you should be able to see your device in the JBL Portable app.
Charging the Speaker When WetYou will need to dry the charging port completely before plugging in power for charging.
Information on different firmware versions on same products and models
There can be differences in the internal hardware that also implies different firmwares. These products feature the same specifications and performance expectations. If the app does not inform you of any new updates, the firmware is current and the product is performing as designed.
Upgrading the software on your PartyBoost or Connect+ Speaker
Software updates for your speaker can be done using the JBL Portable app.
Download it from the Apple App store and Google Play store.
If there is an available update, look for the small red dot above the gear icon and follow the download instructions (see image below).
If you have an issue with your device it is always worth checking if there is a Software update available and performing the installation if there is.
Can’t find what you’re looking for?
Please note that UK delivery times are up to 5 working days.