JBL Flip 3
Full-featured splashproof portable speaker with surprisingly powerful sound in a compact form
Sold from 2015 until 2017
| Predecessor Product: | JBL Flip 2 |
|---|---|
| Successor Product: | JBL Flip 4 |
Getting started with your JBL Flip 3
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Output power (W)
- 2 x 8
- Signal-to-Noise Ratio
- Less than 80dB
- Frequency Response
- 85Hz – 20kHz
- Output power
- 2 x 8W
- Dimensions (cm)
- 6.4 x 16.9 x 6.4
- Dimensions (in)
- 2.5 x 6.7 x 2.5
- Weight (kgs)
- 0.45
- Weight (lbs)
- 0.99
- Bluetooth version
- 4.1
- Battery capacity (mAh)
- 3,000
- Charging time (hrs)
- 3.5
- Maximum music playing time (hrs)
- 10
- 3.5 mm audio cable Input
- Yes
- Auto-power off
- Yes
- Bluetooth
- Yes
- Splashproof
- Yes
- Wireless
- Yes
- JBL Connect
- Yes
- Speakerphone
- Yes
- Transducer
- 2 x 40mm
All-purpose, all-weather companion
JBL Flip 3 is the next generation wireless speaker in the award-winning Flip series. It is a comprehensive portable Bluetooth speaker that delivers surprisingly powerful, room-filling stereo sound everywhere. This ultra-compact speaker is powered by a 3000mAh rechargeable Li-ion battery that offers up to 10 hours of continuous playtime. Sporting a durable, splashproof fabric and available in 8 vibrant colors, Flip 3 is the all-purpose, all-weather companion that integrates music into every aspect of your life – from tabletop to poolside, from sunny mornings to rainy nights. Flip 3 also features a built-in noise and echo cancelling speakerphone for crystal clear conference calls, and JBL Connect technology that can wirelessly link multiple JBL Connect-enabled speakers together to amplify the listening experience.
Wirelessly connect up to 3 smartphones or tablets to the speaker and take turns playing surprisingly powerful, room-filling stereo sound.
Built-in rechargeable Li-ion battery supports up to 10 hours of playtime.
Take crystal clear calls from your speaker with the touch of a button thanks to the noise and echo cancelling speakerphone.
Splashproof means no more worrying about rain or spills; you can even clean it with running tap water. Just don't submerge it.
Build your own ecosystem by connecting multiple JBL Connect-enabled speakers together to amplify the listening experience.
The durable fabric material and rugged rubber housing allows your speaker to outlast all of your adventures.
Hear the bass, feel the bass, see the bass. Dual external passive radiators demonstrate just how powerful your speakers are.
Access Siri or Google Now from your JBL speaker with a simple button press.
FAQs & How-Tos
19 results
-
This is because most Windows do not support A2DP stereo audio streaming via Bluetooth, the standard for music-listening through Bluetooth. The system will support keyboards, mice, printers etc. via Bluetooth, but not audio. It is necessary to download the proper drivers, either from the computer manufacturer, the software manufacturer or the manufacturer of the Bluetooth chip in the computer. Help to do this must be sought with the companies that supply one or more of these computer features.Was this helpful? Thank you for your feedback!
-
If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.Was this helpful? Thank you for your feedback!
-
No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL ConnectWas this helpful? Thank you for your feedback!
-
Yes, after approximately 10 minutes of no activity and no audio, the unit goes into sleep mode. It must be awakened with the ON/OFF Button. It is not possible to wake it up with a Bluetooth pairing signal. After 20 minutes of no activity and no audio, the unit will power off.Was this helpful? Thank you for your feedback!
-
Bluetooth keeps on playing, even if you connect something and play to the AUX input. BT keeps on playing, since it has first priority. If you pause or stop BT play, any source playing to the AUX input will now be heard. If you resume play on the BT source, it will take over, and the AUX source is no longer heard, but will of course keep on playing, since there is no way to send a pause or stop signal to the AUX source via the line cable. All of this means that there is an input selector switch built into the device, controlled by the BT play function.Was this helpful? Thank you for your feedback!
-
By pressing Volume - & JBL Connect button for 3 seconds. A voice will tell you the current software version.Was this helpful? Thank you for your feedback!
-
Make sure your device is paired with a mobile device. When receiving a call, press the phone button to answer the call. You can now use it as a speakerphone.Was this helpful? Thank you for your feedback!
-
In power ON mode press and hold the "Volume +" and "Phone" buttons at the same time for more than 3 seconds -> Unit will power Off by itself.
Now the unit is reset to factory default.
Was this helpful? Thank you for your feedback! -
With the Flip3 ON, press the Bluetooth briefly to enter pairing mode, while another BT source that is already connected plays on. Now two sources can take turns playing, just by pressing play on one, then the other. The one being overridden will enter pause mode. For complete Bluetooth reset, while the Flip3 is ON and paired, press and hold the Bluetooth button for more than 3 seconds. The Bluetooth button light goes out, and the connection is broken. Press the Bluetooth button again for new pairing.Was this helpful? Thank you for your feedback!
-
No, all recordings made on the telephone will be using the telephone's built-in microphone. Replay of the recording will be heard over the speaker afterwards, though, as long as it is paired to the telephone.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00