JBL Go 3 Eco
Ultra-portable Waterproof Speaker
Sold from 2022 until now
Predecessor Product: | JBL Go 2 |
---|
Getting started with your JBL Go 3 Eco
Documents & Downloads
Product Specifications
- Output power (W)
- 4.2
- Dynamic frequency response range (Hz)
- 110 Hz - 20 kHz
- Dimensions (cm)
- 8.75 x 7.5 x 4.13
- Dimensions (in)
- 3.4 x 2.7 x 1.6
- Weight (kgs)
- 0.209
- Weight (lbs)
- 0.46
- Bluetooth profiles
- A2DP 1.3, AVRCP 1.6
- Bluetooth frequency
- 2400 MHz - 2483.5 MHz
- Bluetooth transmitted modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth transmitter power
- ≤ 8 dBm (EIRP)
- Bluetooth version
- 5.1
- Charging time (hrs)
- 2.5
- Maximum music playing time (hrs)
- 5
- Bluetooth
- Yes
- Charging cable
- Yes
- Waterproof
- Yes
- Wireless
- Yes
- Rechargable battery
- Yes
- IP Code
- IP67
Grab & Go
New innovative, eco-friendly design—same big audio performance. Help make the world a little greener with a must-have accessory for your next outing, made from up to 90% post-consumer recycled plastic and wrapped in 100% recycled fabric on the speaker grille. The JBL Go 3 Eco looks as vivid as it sounds with bold styling, expressive, edgy details, and rich JBL Original Pro Sound. The waterproof and dustproof design also features an integrated loop, so you can take your music anywhere, rain or shine, sustainably.
FAQs & How-Tos
-
This product does not feature speakerphone or voice assistant functionality as it does not have a microphone.Was this helpful? Thank you for your feedback!
-
This speaker does not have an Aux Input, so no analog connection is possible.Was this helpful? Thank you for your feedback!
-
First, remove the speaker from your source device's Bluetooth settings.
Power on the speaker, then press and hold the Volume + button and Bluetooth button together for 3-5 seconds until the speaker turns off.
Once turned off, the speaker has been reset to the factory default settings.Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
This product is rated IP67, which is different from IPX7. IP67 protects the product from submersion in 1 meter (3.3 feet) of water for up to 30 minutes. It is also resistant against dust. Dust accumulation around electronics can lead to hardware failure, so the IP67 rating is an extremely beneficial addition to this product.Was this helpful? Thank you for your feedback!
-
Your JBL speaker is waterproof with IPX7 rating. (IPX7 means it can survive immersion in 1 meter/3.3 feet for up to 30 minutes.) To maintain the looks and functions of your speaker, please make sure to rinse it with fresh water after using it at a swimming pool or the ocean, then dry off all covers and areas where water can gather. The standard for waterproofing is for tap water. Chemicals and salt in your pool or the ocean can damage the waterproof seals or harm the surface finish over time if not rinsed off after use.Was this helpful? Thank you for your feedback!
-
It is always recommended to use our range of Soundbars if you want a speaker for your Television or Smart TV as they are designed specifically for this purpose, whereas our Portable speakers are designed primarily for use with Phones and Tablets.
Support for Bluetooth connectivity between a TV and speaker depends on a number of different factors such as Bluetooth & A2DP versions and Audio Codecs used by each device. This can vary based on the brand, model and age of the devices, however we cannot confirm if any specific combination of TV and speaker will work without issues such as latency or lip sync delay.
Was this helpful? Thank you for your feedback! -
To skip tracks forward, double click the PAUSE/PLAY to advance to the next track. Please note: You can only skip tracks forward. This speaker does not have the capability to skip to the previous track.Was this helpful? Thank you for your feedback!
-
The difference is that the new ECO versions of Go 3 and Clip 4 are made from 90% PCR (Post-Consumer Recycled) plastic and wrapped in 100% recycled fabric on the speaker grille, while still delivering the same rich JBL Original Pro Sound and significantly reducing the carbon footprint of the product.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+44 161 222 3325
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
Chat with us
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00