JBL Authentics L8
Two-way speaker system with wireless streaming
Sold from 2014 until 2017
| Made in: | Hong Kong |
|---|
Getting started with your JBL Authentics L8
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Amplifier Power
- 4 x 30W RMS
- Frequency Response
- 55Hz – 35kHz
- Signal-to-Noise Ratio
- 92dB
- High Frequency Transducer
- 25mm tweeter
- Low-Frequency Transducer
- 4 inch woofer
- Maximum SPL
- 104dB @ 1m
- Speaker Width (mm)
- 664
- Speaker Depth (in)
- 13
- Speaker Width (in)
- 26-1/5
- Speaker Height (in)
- 9-2/3
- Speaker Weight (kg)
- 7.4
- Speaker Weight (lb)
- 16.31
- Speaker Height (mm)
- 246
- Speaker Depth (mm)
- 329
Fill the room with great JBL sound, not speakers
Stylish looks. Uncompromising sound. Wireless convenience. Simple fact: the JBL Authentic L8 will change the way your room sounds forever. Inspired by the legendary JBL Century L100 loudspeaker, the JBL Authentic L8 blends classic acoustic speaker design with advanced wireless audio streaming. Sporting a gloss-black wooden enclosure, the L8 maintains unmatched audio quality while providing wireless connection to a wide range of devices via AirPlay, DNLA and Bluetooth®. Near Field Communication (NFC) technology lets you pair a Bluetooth device simply by tapping it on the speaker. Meanwhile, the free JBL MusicFlow app lets you easily set up and control the speaker with your iOS or Android mobile device. And it’s as versatile as it’s easy: charge devices, including tablets by using its built-in USB ports. Packing 120 watts RMS of power, custom JBL low- and high-frequency transducers, advanced DSP technology and a frequency response of 50Hz – 35kHz, the JBL Authentic L8 produces full-range sound and a wide stereo image from a single stereo speaker. Harman Clari-Fi™ technology replaces the details lost in today’s compressed music files, adding detail and energy to any low quality music stream. The JBL Authentic L8 is the perfect companion for any audio source, and the ideal sound system for any living space.
FAQs & How-Tos
-
Yes it is possible to reset your speaker. The reset will remove all Bluetooth pairings and WiFi network settings. In power ON mode, press and hold the Power Button for at least 10 seconds, until the volume and input selector lights begin to flash. Your JBL Authentics L8 or L16, are now back to factory settings. Please reconnect the speaker to your WiFi network again.Was this helpful? Thank you for your feedback!
-
Restore to factory settings:
In power ON mode, press and hold the Power Button for at least 10 seconds, until the volume and input selector lights begin to flash.
Reset to factory default includes Source, Volume settings, EQ settings, AirPlay name and Wi-Fi settings.Was this helpful? Thank you for your feedback! -
If I have a JBL Authentics L8 or L16 that is connected to Wi-Fi, do I need an Adapt to stream to it?Yes, you will need to connect an Adapt to stream music to the JBL Authentics products.Was this helpful? Thank you for your feedback!
-
With the release of v.3.0 of the JBL Music app, owners of the JBL Authentics L8 and L16 are now greeted with a message that an update is available. If you own one of these speaker systems, and you know that it already supports Spotify Connect, the update firmware is already installed, and you can ignore this message. If your speaker system does not already support Spotify Connect, the update is available for you, but you cannot perform it yourself, it must go to a service center to be updated. Please contact Harman Helpdesk or the distributor in your country for advice regarding servicing.Was this helpful? Thank you for your feedback!
-
If you are experience connectivity problems with Wi-Fi connection, please try to reset all Wi-Fi settings. This can be done by pressing power button for 10 seconds, the power button will quickly flash to indicate it has been reset. After you have reset all Wi-Fi settings, please shutdown the device and pull out the power cable from the wall socket. Put back in the power cable into the wall socket and try do the Wi-Fi setup again.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00