JBL CONTROL XSTREAM
WIRELESS STEREO SPEAKERS WITH CHROMECAST BUILT-IN
Sold from 2017 until now
Getting started with your JBL CONTROL XSTREAM
Documents & Downloads
Product Specifications
- Low-frequency transducer
- 5.25" (133mm) woofer
- High-frequency transducer
- 1" (25mm) tweeter
- Rated power
- 30W per channel RMS
- Frequency response
- 70Hz–20kHz
- Signal-to-noise ratio
- 80dBA
- Input connections
- Wi-Fi, Bluetooth®, Aux-in
- Product Dimensions (W x D x H)
- 253.5mm x 178mm x 145.5mm per speaker
- Weight
- 2.65kg (Primary speaker)
- Packaging Dimensions (W x D x H)
- 430mm x 230mm x 300mm
- Gross weight
- 6.7kg
- Power supply
- 100-240VAC, 50/60Hz, 60 Watts
- Power consumption in sleep mode
- <2.0W (for primary speaker), <0.5W (for secondary speaker)
- Bluetooth® version
- 4.2
- Bluetooth® transmitter frequency range
- 2402−2480MHz
- Bluetooth® transmitter power
- <4dBm
- Bluetooth® transmitter modulation
- GFSK, π/4 DQPSK, 8DPSK
- 5G Wi-Fi transmitter frequency range
- 5.150~5.350GHz,5.470~5.725GHz, 5.725~5.825GHz
- 5G Wi-Fi transmitter power
- <20dBm (EIRP)
- 5G Wi-Fi modulation
- OFDM, BPSK, QPSK, 16QAM, 64QAM, 256QAM
- 5G Wi-Fi network compatibility
- IEEE 802.11 n/ac
- 2.4G Wi-Fi transmitter frequency range
- 2412–2472MHz(2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
- 2.4G Wi-Fi transmitter power
- <20dBm (EIRP)
- 2.4G Wi-Fi modulation
- OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
- 2.4G Wi-Fi network compatibility
- IEEE 802.11b/g/n/ac
- Power consumption in sleep mode
- 2.0 Watts/hour
- Note - The JBL Control XStream is intended to be used for streaming music via Bluetooth® and Wi-Fi technology. This product is designed to be instantly on and ready to play music at a moment’s notice. The JBL Control Xstream is in compliance with the European Union energy legislation. It will enter into sleep mode (networked standby) after 10 minutes without operation, after which it can be re-activated via Bluetooth® or Wi-Fi.
Stream your music anytime
Powerful and perfect for both indoor and outdoor use, the JBL® Control XStream is the world’s first wireless loudspeaker pair with Chromecast built-in, Spotify Connect and Bluetooth® capabilities. With Chromecast built-in, you can instantly stream music from your favorite music app, radio, or podcast from services like Google Play Music, Spotify, Pandora to your speaker using your smart device or voice command, while working with the Google Assistant. To amplify your party, speakers with Chromecast built-in can be grouped together to enjoy the same song in every room. Moreover, powered by Spotify Connect, you can experience effortless control of your music with just pressing “PLAY” button on the speaker to play your favorite playlist instantly.
FAQs & How-Tos
-
Control Xstream is splash proof (IPX3). Which means that they can be used outside, but they should not be exposed to direct precipitation.Was this helpful? Thank you for your feedback!
-
No, you can only have one activate device connected to the speaker. Please un-pair your current Bluetooth device, then connect with another device if needed.Was this helpful? Thank you for your feedback!
-
Yes, Control Xstream uses both 2.4 GHz and 5 GHZ wi-fi networks.Was this helpful? Thank you for your feedback!
-
Please note that although the Control Xstream does have a threaded insert for brackets, JBL offers no brackets. Custom made wallmounts should be used.Was this helpful? Thank you for your feedback!
-
Yes, Control Xstream is a Chromecast device that allows you to cast music content via your Chrome browser. However, the JBL Control Xstream is not made for video purposes, because there will be delay between sound and image.Was this helpful? Thank you for your feedback!
-
Yes, that’s the best part about this speaker, there are so many options. Besides streaming over Wi-Fi, the JBL Control Xstream also offers a Bluetooth connection and an AUX inputWas this helpful? Thank you for your feedback!
-
Yes, Control Xstream supports Spotify Connect, which can be used from the Spotify app if you have a premium account.Was this helpful? Thank you for your feedback!
-
No, the connection between our Control XT wireless speakers are established through Wi-Fi connection, running on 2.4 GHz network. The only time you will use Bluetooth, is when you connect to the primary speaker and start streaming music.Was this helpful? Thank you for your feedback!
-
Look at the back of the primary speaker, which is the one with pause/play and volume controls. You will see a switch called "mode". This switch can be in either S or P position. S stands for Secondary, P stands for Primary. Switch to Primary, and your speaker will now open Bluetooth and will accept analog signals. (The Secondary position is used for systems where four speakers are in use, since only one speaker can act as primary speaker.)Was this helpful? Thank you for your feedback!
-
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+44 161 222 3325
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
Chat with us
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00