How To
How To
-
Yes, there are two ways to disable the voice assistant feature.
1) double tap the left ear cup, or 2) In the My JBL Headphones app, de-select both assistants.Was this helpful? Thank you for your feedback! -
Yes, the JBL Playlist can be reset to factory settings. First, Power ON the JBL Playlist. Secondly, press and hold the Play and Volume (-) buttons simultaneously for about 10 seconds, and after 10 seconds you should see the Play/Pause and Bluetooth button light up, followed by the speaker going into Standby. Once you see the speaker powers back ON, reset is complete.Was this helpful? Thank you for your feedback!
-
Please note that although the Wireless version of Control X does have a threaded insert for brackets, JBL offers no brackets. The brackets for the Control X passive model cannot be used with the wireless version. Brackets for the wireless version must be custom made.Was this helpful? Thank you for your feedback!
-
Please note that although the Control Xstream does have a threaded insert for brackets, JBL offers no brackets. Custom made wallmounts should be used.Was this helpful? Thank you for your feedback!
-
We only offer volume+ and volume-, mute and power for your TV remote to learn these IR codes.Was this helpful? Thank you for your feedback!
-
Yes, you can listen to lossless audio from your speaker.
Make sure the software version installed is 1.9.0.1 or later for the Charge 6, which can be updated via the JBL Portable app.
You will then be able to enjoy lossless audio through a USB cable connection to your laptop or tablet.
Follow these steps to enable USB audio playback:
a. Enter USB Audio Playback mode
Make sure the speaker is turned on.
Press and hold the "Play" button on the speaker and connect a USB-C cable to the speaker, you'll hear a confirmation tone when USB Audio Playback mode is activated.
b. Revert to Bluetooth mode
The speaker will automatically switch back to Bluetooth mode when the USB cable is disconnected from the USB port.
c. Re-enter USB Audio Playback mode
To switch back to USB Audio Playback mode, reconnect the USB-C cable and repeat the steps.
A USB type A-C or type C-C shorter than 1,2m is recommended for optimal performance.
USB thumb drive playback is not supported.
Was this helpful? Thank you for your feedback! -
Yes, you can listen to music via cabled connection while you charge the battery. As soon as you insert the charging cable, all active circuits are switched off, and only the analog cable input remains active. When charging has finished, you can use the wireless and noise cancelling functions again.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
Unfortunately, you cannot turn on and use the headphones while they are charging.Was this helpful? Thank you for your feedback!
-
Yes, these headphones can be connected and paired to two devices at the same time.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00