How To
How To
1102 results
-
There is a constant red light in the LED while charging takes place. When charging is complete, the diode goes dark.Was this helpful? Thank you for your feedback!
-
It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
Once set up, you can directly access it through the remote control or within the JBL ONE App.Was this helpful? Thank you for your feedback! -
The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.Was this helpful? Thank you for your feedback!
-
The Wi-Fi indicator shows the signal strength between your speaker and Wi-Fi router. 3 bars = perfect signal 2 bars = good signal 1 bar = low/poor signal (which might cause dropouts or other issues)Was this helpful? Thank you for your feedback!
-
The battery LED's show how much the battery is charged on your LINK 10 or LINK 20 speaker.Was this helpful? Thank you for your feedback!
-
Here is a list of what the LED lights mean. Light OFF: Power OFF, no charger connected, OR charger connected, fully charged. RED light ON: Power OFF, charger connected and charging. BLUE light flashing: Power ON, no Bluetooth connected. Constant BLUE light: Power ON, connected to Bluetooth device. RED/BLUE light flashing: Power ON, in pairing mode. RED light flashing: Power ON, low battery.Was this helpful? Thank you for your feedback!
-
Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.Was this helpful? Thank you for your feedback!
-
Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.Was this helpful? Thank you for your feedback!
-
You can adjust equalizer, RGB LED effects, calibrate Quantum ONE headtracking, change microphone settings and update the headset's firmware.Was this helpful? Thank you for your feedback!
-
The JBL Headphones app provide the following functions:
Equalizer setting
Auto on/off
Microphone gain settings
Battery life status
Noise suppression level
LED brightness setting
Was this helpful? Thank you for your feedback! -
The soundbar will auto switch the source between HDMI eARC and optical. HDMI eARC is higher priority than optical source. It is not possible to manually switch from HDMI to optical.Was this helpful? Thank you for your feedback!
-
All speakers are set to react when you use the keywords to interact with Google. To eliminate multiple speakers talking at the same time, using the "Microphone Mute" button will stop the speaker from reacting to the keywords.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00