The JBL TOUR range helps you create an ideal world where you can entirely focus on your tasks.
With the JBL Tour One and Tour Pro+ TWS, you can get silent moments with SilentNow. Noise Cancelling is activated without Bluetooth, just by pressing a dedicated button on the headphones (or tapping the earbud) or controlling via the My JBL Headphones app. It also helps you save battery time.
Or get help in waking up with My Alarm, which allows sleep and wake times to be set and is controlled ​via the My JBL Headphones app. You can set a sleep and wake timer to gradually lower the volume of the headphones for sleep, switch into SilentNow mode for a specific amount of time and then wake you up at a specified time.

 

The SilentNow feature allows you to activate Noise Cancelling without using Bluetooth, i.e. simply turning on ANC without playing music. A useful feature if you just want to enjoy a quiet moment or would like to rest on a long-haul flight.
 

You can have your own Karaoke party with your JBL Partybox. Simply connect your Microphone (only included with the Partybox On The Go) and connect your mobile device over Bluetooth, then start playing music and sing along, it is that simple!

The Horizon 2 does not have sleep mode functionality.

By optimizing Bluetooth settings via the app, you can get optimized audio in different scenarios like either listening to music or watching videos.
Select between “Normal” to optimize and stabilize the connection even in the busiest areas, “Music mode” to enjoy the best sound quality for music, and “Video mode” to get the best lip-syncing when watching or gaming.

 

It is always recommended to use our range of Soundbars if you want a speaker for your Television or Smart TV as they are designed specifically for this purpose, whereas our Portable speakers are designed primarily for use with Phones and Tablets.

Support for Bluetooth connectivity between a TV and speaker depends on a number of different factors such as Bluetooth & A2DP versions and Audio Codecs used by each device. This can vary based on the brand, model and age of the devices, however we cannot confirm if any specific combination of TV and speaker will work without issues such as latency or lip sync delay.

Please check that you have connected your android phone with JBL DRG before. Power off your Android phone and press the JBL DRG BT button to connect to another smartphone. If this is the case, please wait 3 minutes for JBL DRG to setup the Bluetooth connection with a new smartphone. This is because some android phones can’t send a “Disconnect” BT command to JBL DRG during power off, so JBL DRG need to wait until the Link is lost.

If you experience any sound distortion after immersing your speaker in water, simply shake the speaker to get rid of any excess moisture and allow the speaker to completely dry. Once dry, the sound quality should return to normal.

Switch the Soundgear ON. (If this is not possible, reset cannot be performed.)
Press and hold Volume + and Volume - simultaneously for longer than five seconds.
Soundgear switches OFF, and is now reset to factory settings.

For the Club 950NC and 700BT, a dedicated button on the right ear-cup (*) for Bass Boost – gives the user the option to give an extra boost to their listening experience. Power surges from equipment (such as a panel/mixer) which would blow out a standard headphone could be experienced while playing at high power. Specially designed driver coil and magnet give a higher resistance to power surges. The maximum input power for CLUB 700BT is 1000 mW, for CLUB 950NC is 2000 mW and CLUB ONE is 3500 mW accordingly.

 

If the earbuds go into standby mode and turn off, you can still use them without putting them back into the charging case. 
You can reactivate the headphones by pressing or touching the outside earbud itself.
Please note: They will be automatically powered off after 30 minutes of being in standby mode if they disconnect from Bluetooth. To reconnect, you will need to put the earbuds back in the charging case and take them off again. 

It is possible to change the standby mode time with your headphones. To do this, go into the My JBL Headphones app and choose the Standby Time via Auto-off function. You can adjust the time to 15min, 1hr, etc., or you can choose “Never” if you want to keep the earbuds turn on at all times. Once you set the Auto-off, the earbuds will work according to the setting whether they connect to Bluetooth or disconnect.
 

Our LINK BAR supports 4K material and contents these different ways.

1. HDMI INPUT Supports 4K
2. Chromecast streaming in 4K.
3. 4K Material through the Android TV System.

You can watch your favorite 4K material in many different ways and enjoy!

SA750 Software Revival Guide

Reason	Revival method for SA750 if a problem exists after a stalled software update
Symptoms	Unit will display “NET UPDATING” on the front panel display and will not complete startup
Parts required	1) a USB stick, 2) a computer for transferring files to the USB stick, 3) unit software detailed in this guide

                             

1. Download the software bundle by clicking here . You will download a zipped folder called “SA750 v1542 Reflash Bundle.zip”
2. Unzip/extract this folder (some computers will do this automatically). Inside the folder you will find 2 more folders named “Step 1 V1206 V1.72” and “Step 2 V1542 V1.72”
3. Double click on the “Step 1 V1206 V1.72” folder. Inside you will find a file named “image.swu”
4. Copy this image.swu file to a blank USB memory stick.
   • NOTE! The file MUST be called image.swu. If you copy the file to a location where there is already a file called image.swu your computer may rename the file automatically (for instance as “image.swu (1)”. Please double check that the file is called “image.swu” when on the memory stick.
5. Power off the SA750 from the hard power switch on the rear of the unit immediately above the mains inlet socket.
6. Insert the USB memory stick into the rear of the unit.
7. Depress the recessed service switch (above the CD input connector sockets) and continue to keep it depressed.
8. Power the unit on whilst keeping the service button depressed.
9. Keep the service button depressed for at least 30 seconds after power on.
10. Release the service button.
11. Leave the unit for at least 30 minutes to update.
12. Perform a NET reset (MENU > SYSTEM SETTINGS > NET RESET).
13. Perform a SYSTEM reset (MENU > SYSTEM SETTINGS > SYSTEM RESET).
14. Functionality should now be revived. To update to the most current software version repeat points 3-13 above but using “Step 2 V1542 V1.72” at point 3.     

 

The JBL Quantum 300 headset is compatible with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.
You can also use the included USB dongle on PC, PlayStation and Mac.

The JBL Quantum 400 headset is compatible via 3.5mm jack with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.
You can use the USB connection with PC, PS4, Nintendo Switch, and Mac.

This unit is IPX4 rated, which means that it is sweatproof (suitable for working out) and can withstand water splashes from any direction. However, the unit is not waterproof and should never be submerged in water.

Switching to a new Wi-Fi network

1. Make sure your mobile device is connected to the same Wireless Network as your speaker.
2. Open your Google Home app 
3. Go to Settings 
4. Tap on Wi-FI Forget Network
   1. The current configuration is now forgotten.
5. In your Google Home app, you are forced back to the "Home Screen" and need to setup the device again.
6. Tap on
7. Find Add   Set up device Set up new devices in your home
8. Follow the instructions given to add the speaker to your Wi-Fi network.

Lost connection or changed settings

1. Open the Google Home app
2. On the home screen, tap on AddSet up device Set up new devices in your home
3. Follow the instruction provided.
   1. Remember that your current room name is the same as before, as well as other settings made for the speaker. You are only switching to a new Wi-Fi.
4. In addition, you can click on Discovery in the bottom menu of the Google Home app.
5. Tap on the Setup The Card information would show your old speaker name.  However, you can continue setting up the device following the instructions.

 

 

To power on the headphones, place one of the headphones inside your ear and press and hold the center button on the inline mic. You should hear the audio chime and a blue blinking light should appear at the top of the inline mic. If this is your first time connecting to a device, it should immediately go into pairing mode. The device should recognize the T110BT headphone. Once you select that option, you will hear the confirmation tone. If you are trying to connect to a different device, turn the headphones on and press and hold for 3-5 seconds for the headphones to start searching for a different device. The headphones should appear on your discoverable devices within a few seconds. You should hear the audible tone and then the confirmation chime once it is connected. You will see the Bluetooth light alternate between red and blue when it is in pairing mode and then to a slow blinking LED blue light once it is connected to your device.

With TalkThru Technology, music is lowered and speech is amplified so you can easily have quick chats. AmbientAware delivers a more immersive music experience while increasing ambient sounds, providing the safety of hearing your surroundings. You can control them via the buttons on the ear cup and with the My JBL Headphones app

To activate TalkThru Technology, press the LEFT ear for a short press for 1 Second which allows you to clearly hear others for quick conversations without removing headphons. Music volume level should lower when TalkThru is engaged. Press again for 1 second to turn off Talk Thru.

The amber LED lights indicate that you have muted the microphone and the Google Assistant. The JBL LINK will not react to any voice keywords unless you unmute the microphone.

Yes, the app only works when the headphone is powered ON and paired to a source device that has the app available.

If the audio is not centered to your monitor, then you can re-center your headset by doing the following: 1. Position yourself in front of your monitor. 2. Press the re-centering button on the side of your headset (button that looks like a circle) 3. The head-tracking sensor will start the automatic calibration.

To clean your LINK BAR, use a soft dry Microcloth to remove dust and dirt.
We wouldn't recommend using any alcohol as it may harm the product.

It is true that some Bluetooth products have a very loud BT acknowledgment tones. We are sorry, but the level of such tones cannot be changed, and no software solutions will appear.

Even when reducing volume to minimum on the Bluetooth source unit, it does not reduce the audio signal to zero. In this case the Micro Wireless will playback music at a very low volume.

True Adaptive NC available on Tour One enables real-time monitoring of exterior surroundings and personal attributes like movement, hair, eyeglasses, and automatic adjustments to the NC performance and EQ.

If you don’t prefer the canceling performance's automatic change, you can get a fine-tuned canceling level by choosing “Everyday Mode” in the app.

Adaptive Noise Cancelling - available on Tour Pro+ TWS - listens to ambient environmental noises using external and internal mics then creates the inverse phase back to the listener creating the noise “canceling” effect.
The headphones also allow the listener to adapt or adjust noise cancellation through features like Ambient Aware and TalkThru.

Make sure to press the association button once. If by mistake you pressed it more than once, there is a good chance that association does not take place. Wait until the association process is completed, which takes about 2 minutes, and repeat the process.

This can be caused by the charge arm reaching its thermal temperature cutoff. This is a safety feature to prevent a potential risk. For proper heat dissipation, always be sure to have the charging arm in the open position when your smart phone is attached.