How To

Support Overview / How To

How To

1102 results

Sort

Page size

Why do all top panel LEDs flash when switched on? Why can the product not be connected or does not function?
The top panel LEDs are flashing because the OTA firmware update is in progress, the product should work after the upgrade is completed. It may have been caused by a previous interruption to an update.

It should be possible to resolve the issue by doing the following:
- Plug in the power cable and wait for at least 5 minutes for the Partybox Ultimate to complete the update.
- If the Partybox Ultimate stops flashing, but cannot power on, then perform a factory reset by pressing the two buttons below for more than 10 seconds: Moment (heart symbol) and Play (or through the JBL One app). After this has been done, press the Power button.
Was this helpful? Thank you for your feedback!
14 hours Battery-life without using RGB Lighting feature

Yes, it's 14 hrs with RGB off. You can also find the details on the box.

Was this helpful? Thank you for your feedback!
7.1 Surround configuration set up guide

To configure the 7.1 Surround feature on your PC, please follow the guide below:

1. In the left corner on your screen right next to the Windows logo, click on the spy-glass to start a search on your PC.
2. Type in Sound --> then select Change System Sounds:

3. Make sure that your the Quantum Headphones is your Default Device for both Speakers ( Game ) and Earphone ( Communication device )

4. To configure the 7.1 Surround feature, right click on the Speakers --> then select Configure Speakers

5. Select 7.1 Surround and click on Next

6. Make sure that all boxes are selected, then click Next

7. Make sure both boxes are selected, and then click Next

8. Click on Finish. Now your Quantum headphones is configured for 7.1 Surround sound. The configuration will remain after rebooting PC or reconnecting headphones.

Enjoy your sound experience #SoundIsSurvival #DareToListen

Was this helpful? Thank you for your feedback!
Adding Amazon Account

If you have already setup your JBL BAR 5.1 SURROUND with Google Home or AirPlay, you can now sign into your Amazon account via the JBL BAR Setup App. Just download the app and follow the instructions.

Was this helpful? Thank you for your feedback!
After I set up Alexa and Google Assistant on this speaker, can I use Google Assistant to hear the notification I set up in the Alexa app?

No. Alexa notifications must be set up in the Alexa app and you can control the notification via Alexa voice only.

Was this helpful? Thank you for your feedback!
After I set up Alexa and Google Assistant on this speaker, can I use Google Assistant to stop the music playback, alarm and timer triggered by Alexa or vice versa?

Yes, you can use the universal command “ Stop”, “Dismiss”, “Cancel” and “Quiet” to stop the current music playback, alarm and timer.

Was this helpful? Thank you for your feedback!
After I set up Alexa and Google Assistant on this speaker, can I use Google Assistant to turn off lights I set up in the Alexa app or vice versa?

No, unless you have set up devices with both voice assistants, you cannot use Alexa to control devices you set up only in the Google Home app, or use Google Assistant to control devices you set up only in the Alexa app.

Was this helpful? Thank you for your feedback!
After i switch from Bluetooth to Optical and back again, the Bluetooth connection stopped?

The Bluetooth connection will not keep playing once you have switched the source. Simply press play again on your Bluetooth device to start streaming once again.

Was this helpful? Thank you for your feedback!
After I updated my computer to Windows 8/10, I am no longer able to establish a Bluetooth connection with my speaker to play music. How can I correct the problem?

This is because most Windows do not support A2DP stereo audio streaming via Bluetooth, the standard for music-listening through Bluetooth. The system will support keyboards, mice, printers etc. via Bluetooth, but not audio. It is necessary to download the proper drivers, either from the computer manufacturer, the software manufacturer or the manufacturer of the Bluetooth chip in the computer. Help to do this must be sought with the companies that supply one or more of these computer features.

Was this helpful? Thank you for your feedback!
Alarm and backup battery information

On backup battery power, please wait 50 seconds for the alarm to turn off automatically.

Was this helpful? Thank you for your feedback!
Alarm Settings

You must first set a radio preset by tuning to a radio station and holding down the 1, 2, or 3 button to save it. After this, the preset will be an option when setting up a new alarm.

When setting up the alarm, the options will be displayed in the following order:
1. Set Alarm Hour.
2. Set Alarm Minute.
3. Set Recurrence - Weekday/Once.
4. Set Ringtone - 4 built-in alarm tones or radio preset 1/2/3 (see information above).
5. Set Light - On/Off.

If the light is set to 'On' when the alarm is set up, once it goes off it will gradually increase in brightness over 10 seconds.

Was this helpful? Thank you for your feedback!
Alarm Volume Adjustment

You can easily adjust the volume to your choosing while setting your alarm on the Horizon 2. When setting your alarm, choose the Alarm Bell 1 or the Alarm Bell 2 on the top of the speaker. As you go through your settings when choosing an alarm time, it will give you the option to adjust the volume setting you wish to have on the alarm. Just simply adjust the volume by turning the volume knob on the top of the speaker. After you choose the volume, press the volume knob once to move to the next settings option.
Please note: the alarm volume will gradually increase until you choose to either snooze or turn the alarm off completely.

Was this helpful? Thank you for your feedback!