How To
How To
1102 results
-
Yes, the microphone allows you to skip tracks and control volume. To skip tracks forward, press and hold the volume + for 3 seconds. To skip tracks backward, press and hold the volume - for 3 seconds.Was this helpful? Thank you for your feedback!
-
No. The JR 300 is a standard plug and play headphone with no microphone or track features.Was this helpful? Thank you for your feedback!
-
Yes, the calibration is done for both left and right earsWas this helpful? Thank you for your feedback!
-
No, the JBL LINK speaker does not store any conversations, it listens only for a few seconds and then deletes the file. Only when using "OK, Google" or "Hey, Google" will it start recording your question so Google Assistant to fulfill your request. You can always delete all your recordings via "My activity" settings under your Google Account.Was this helpful? Thank you for your feedback!
-
No, but you can use Chromecast to stream Spotify to any JBL LINK speaker. Google has the option of using your free Spotify account with our JBL LINK speaker.Was this helpful? Thank you for your feedback!
-
No. The JBL Free does not feature volume control. It features pause/play and track control.Was this helpful? Thank you for your feedback!
-
Both of these JBL PRO speaker models need mains power. There is no battery inside.Was this helpful? Thank you for your feedback!
-
Yes, the JBL Duet features an audio cable that you can plug into if you choose not to use the bluetooth. The audio cable features a one button microphone that allows you to pause/play and skip tracks. You also have the capability to answer and hang up phone calls.Was this helpful? Thank you for your feedback!
-
Yes, the Boombox plays at 3,5dB higher volume than the JBL Xtreme. This results in a 150% volume increase, compared to the JBL XtremeWas this helpful? Thank you for your feedback!
-
No, the JBL Bar 300/500 does not support DTS.
It supports the following Dolby Audio formats:
Dolby Atmos
Dolby Digital
Multichannel PCMWas this helpful? Thank you for your feedback! -
No. The J88a features a one button microphone that does not have volume control. The one button microphone allows you to pause/play, skip tracks and answer/hang up calls.Was this helpful? Thank you for your feedback!
-
Yes, the Inspire 500 features a 3 button mic that features, pause/play, track and volume control.Was this helpful? Thank you for your feedback!
-
Yes. The Inspire 500/700 series features a three button microphone that enables you to control the volume.Was this helpful? Thank you for your feedback!
-
No, the Flip 3 carrying case is too small. At the moment, no carrying case is available for Flip 4. We suggest that you check out manufacturers that specialize in this kind of accessory.Was this helpful? Thank you for your feedback!
-
No, the Flip 3 Stealth Edition does not support JBL Connect or Connect+. The Stealth edition can not be paired with other JBL devices.Was this helpful? Thank you for your feedback!
-
Yes, the Everest 110 features volume control that is compatible with most smart devices. The volume control is located on the inline microphone.Was this helpful? Thank you for your feedback!
-
Yes, the E55BT Quincy Edition headphones feature a carrying case.Was this helpful? Thank you for your feedback!
-
Unfortunately, the E15 features the one button microphone that does not feature volume control. You have track control, pause/play and phone capabilities.Was this helpful? Thank you for your feedback!
-
No the audio cable included with the Everest series headphones has a one-button remote control with microphone. It does not have volume buttons. It can perform pause/play, and gives you the ability to answer and hang up phone calls. However, you can control the volume when the headphones are connected to a source device with Bluetooth, using the buttons on the ear cup.Was this helpful? Thank you for your feedback!
-
No the audio cable included with the Everest series headphones is a one button microphone that features pause/play, track control and gives you the ability to answer and hang up phone calls. You are able to control the volume when the headphones are connected through bluetooth.Was this helpful? Thank you for your feedback!
-
The app works with the Everest Elite models only.Was this helpful? Thank you for your feedback!
-
Personalised Products are custom-printed to your individual specification and therefore cannot be returned or refunded.
Was this helpful? Thank you for your feedback! -
No, SBC Codec and AAC Codec are supported.Was this helpful? Thank you for your feedback!
-
This product does not feature speakerphone or voice assistant functionality as it does not have a microphone.Was this helpful? Thank you for your feedback!
-
Bluetooth keeps on playing, even if you connect something and play to the AUX input. BT keeps on playing, since it has first priority. If you pause or stop BT play, any source playing to the AUX input will now be heard. If you resume play on the BT source, it will take over, and the AUX source is no longer heard, but will of course keep on playing, since there is no way to send a pause or stop signal to the AUX source via the line cable. All of this means that there is an input selector switch built into the device, controlled by the BT play function.Was this helpful? Thank you for your feedback!
-
Yes, you can adjust game and chat audio balance by rotating the puck clockwise and anti clockwise. When rotating the puck, you will feel a notch in the puck that indicates 50 game and 50 chat.Was this helpful? Thank you for your feedback!
-
Yes, you can adjust game and chat audio balance by rotating the dial clockwise and counter clockwise. When rotating the dial, you will feel a notch in the dial that indicates that the audio is at 50 in the game and 50 in the chat.Was this helpful? Thank you for your feedback!
-
No, the connection between our Control XT wireless speakers are established through Wi-Fi connection, running on 2.4 GHz network. The only time you will use Bluetooth, is when you connect to the primary speaker and start streaming music.Was this helpful? Thank you for your feedback!
-
Yes. When SoundShift is active, and your Bluetooth device is connected to your soundbar, you can easily listen to Bluetooth streaming and switch back to the previously selected source just by tapping the pause/play button on your Bluetooth device. When SoundShift is off, your Bluetooth paired device can not interrupt your current source.Was this helpful? Thank you for your feedback!
-
Yes, in two hours, you can charge it to approx. 6 hours of playing time.Was this helpful? Thank you for your feedback!
-
Yes, the JBL Quantum TWS and JBL Quantum TWS air earbuds are compatible with the JBL Headphones app. It'll allow you to control EQ, ANC (only JBL Quantum TWS) and Smart Ambient feature, Smart Audio & Gaming etc. for better experiences with your headset just like other JBL lifestyle products.Was this helpful? Thank you for your feedback!
-
The JBL Quantum ONE provides QuantumSURROUND via the USB connection on PC. You can download QuantumENGINE here: JBLQuantum.comWas this helpful? Thank you for your feedback!
-
Yes. You can configure the volume of the mic monitoring in JBL QuantumENGINE. The default setting of the mic monitoring is "OFF”.Was this helpful? Thank you for your feedback!
-
The JBL Quantum 910 Wireless provides QuantumSURROUND via the USB connection on PC.Was this helpful? Thank you for your feedback!
-
Yes. You can configure the volume of the mic monitoring in JBL QuantumENGINE. The default setting of the mic monitoring is "OFF”.Was this helpful? Thank you for your feedback!
-
Yes, EON 208P has a selector switch where you can turn phantom power on/off when needed for condenser microphones on CH1 and CH2.Was this helpful? Thank you for your feedback!
-
No, there is no phantom power in the microphone inputs.
All power to active microphones must be supplied from an external source.Was this helpful? Thank you for your feedback! -
Yes, after approximately 10 minutes of no activity and no audio, the unit goes into sleep mode. It must be awakened with the ON/OFF Button. It is not possible to wake it up with a Bluetooth pairing signal. After 20 minutes of no activity and no audio, the unit will power off.Was this helpful? Thank you for your feedback!
-
Yes, the Focus 500/700 features a 3 button mic that features, pause/play, track and volume control.Was this helpful? Thank you for your feedback!
-
Yes, Control Xstream supports Spotify Connect, which can be used from the Spotify app if you have a premium account.Was this helpful? Thank you for your feedback!
-
No, we only support SBC Codec and AAC Codec.Was this helpful? Thank you for your feedback!
-
The display will timeout and switch off automatically after 30 seconds if no buttons are pressed to preserve battery life, but pressing any button will wake the display again. It is not possible to change or switch off the automatic display timeout.
The speaker itself will turn off automatically after 15 minutes inactive, if no music is playing on any mode or button are pressed (not possible to change).Was this helpful? Thank you for your feedback! -
Was this helpful? Thank you for your feedback!
-
The True Adaptive Noise Cancelling technology is a features which adjusts noise-cancelling levels in real-time, 50,000 times per second to account for environmental ambient noises and personal attributes such as movement, hair and eyeglasses to deliver best-in-class Noise Cancelling and immersive sound in any environment.
With the help of Feed Forward and Feed Backward microphones, the Adaptive Noise Cancelling technology fully monitors exterior sounds picking up low-frequencies and neutralizing them before they reach the ear. The headphones generate a sound that's phase-inverted by 180 degrees to the unwanted noise, resulting in the two sounds cancelling each other out.
In addition, all headphones allow the listener to adapt or adjust the level of ambient noise through features like Ambient Aware and TalkThru.Was this helpful? Thank you for your feedback! -
Was this helpful? Thank you for your feedback!
-
If there are drop out or connection issues when using PartyBoost or Connect+, it could be one of three things.
1. Units are too far apart (move units closer together)
2. Interference from other 2.4gHz wireless units in the area.
3. Unit is no longer working as designed
Here are some steps to isolate the issue:
Try taking the units out of the house and test it outside with no interference to see if you still experience connectivity issues. If you still experience connectivity issues, please try steps below:
Whatever unit drops off, remove that from the chain. Test the rest of the speakers and keep doing it until you find the speaker that is causing the drop outs. If all speakers begin to drop off, please try a different order and repeat. Repeat this process with each unit being the “main speaker”.Make sure to turn off all WiFi/RF devices. (Router, laptop, baby monitor, Nest cams, IP cams, WiFi switches, WiFi outlets, WiFi lights, cordless phones, etc.)
You should be able to identify the issue/speaker by following these steps.
Was this helpful? Thank you for your feedback! -
It is very simple to connect to your Car with the JBL Partybox 200 or 300. Use the included cable that connects through the cigarette connector in your Car and power on the Partybox! Please note that the 12V connection does not charge the battery in the Partybox 300 - it will only power the Partybox when in use. To charge the battery, it will have to be plugged into AC power ( 110 - 230V )Was this helpful? Thank you for your feedback!
-
This product is not supported by Connect + or Partyboost on the JBL Portable app. They cannot connect to other portable speakers wirelessly.Was this helpful? Thank you for your feedback!
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback! -
You will need to dry the charging port completely before plugging in power for charging.
Was this helpful? Thank you for your feedback! -
To charge the headphones, place inside charging case. While charging, both LEFT and RIGHT ear bud will display a sold red light. Once the headphones are fully charged. The red light will turn OFF. When the charging case is fully charged, the white LED's will light up accordingly. Battery life can last for 10-hours per charge. You may recharge your earphones for another 40-hours playtime with the charging case. It takes 2 hours to fully charge the charing case.Was this helpful? Thank you for your feedback!
-
Yes, you can use the headset while charging!Was this helpful? Thank you for your feedback!
-
CHARGE 5
Software Update Release Notes
------------------------------------------------------------------------
Version: 0.8.9.0
Release Date: January 15th, 2025
Release Media: OTA (over the air) Update through JBL Portable App
What’s New
- Updated standby time
- Improved Samsung TV compatibility
Was this helpful? Thank you for your feedback! -
1. In order to change the name of the speaker, you must first connect your speaker via Bluetooth and then download the JBL Connect app.
2. Once the app is downloaded choose app and wait for it to recognize your device.
3. Now that your speaker is highlighted, choose the gear located either below or to the right of the speaker image.
4. Once you choose the gear you will have the option to edit the name by clicking on the small pencil icon.
5. After you change the name, you will see a notification stating to "Reconnect to Apply New Name"
6. Go to your Bluetooth settings select "Forget This Device" and then reconnect to establish the new speaker name.Was this helpful? Thank you for your feedback! -
In the customized lightshow, you can select up to 3 patterns, however; the preset color cannot be changed. You can always adjust the lightshow brightness.
Was this helpful? Thank you for your feedback! -
On the bottom panel, rotate the battery cover into the unlocked position and remove the cover. Press the battery clip visible on the back side of the battery compartment to allow the existing battery to come out. Then insert the new battery in the slot with the + side visible (facing up), and install the battery cover again. Rotate the battery cover to lock it into place.
Was this helpful? Thank you for your feedback! -
You can change the JBL Pulse lightshow via JBL Portable app.
1. Connect the Pulse with your phone, open the JBL Portable app and wait for app to recognize your speaker.
2. Click the Lightshow button to enter the lightshow set-up
3. Swipe left and right to change lightshow
4. Swipe to customized page, to select your favorite pattern and customize your lightshow
5. Click the color wheel to change color or enter camera color picker
6. Click the brightness button to adjust brightness of the lightshow
Was this helpful? Thank you for your feedback! -
For the best PartyLight Stick and PartyLight Beam performance, connect it by using a JBL Auracast™-enabled PartyBox models such as the PartyBox Club 120, Stage 320 and Ultimate.
Was this helpful? Thank you for your feedback! -
No. Bluetooth does not work under water. The Endurance DIVE however has a built-in MP3 player for music, and is IPX7 waterproof. This means you can use the headphones submerged to 1 meter depth, up to 30 minutes at a time. Also note that for normal swimming, you won't be submerged all the time, so the headphones should be waterproof for the duration of your swim.Was this helpful? Thank you for your feedback!
-
Yes, the Inspire 500 features a microphone located on the cord. We recommend running the cord under your chin for the best call connection.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00