UA Project Rock Over-Ear Training Headphones - Engineered by JBL
Over-Ear ANC Sport Headphones
Sold from 2021 until now
Getting started with your UA Project Rock Over-Ear Training Headphones - Engineered by JBL
Documents & Downloads
Product Specifications
- Weight (g)
- 294
- Driver size (mm)
- 40
- Driver sensitivity at 1kHz/1mW (dB)
- 102 dB SPL@1 kHz / 1mW
- Dynamic frequency response range (Hz)
- 20 Hz - 20 kHz
- Impedance (ohms)
- 32
- Driver Size
- 40 mm / 1.57" Dynamic Driver
- Weight
- 294g /0.65 lbs
- Bluetooth profiles
- HFP V1.7, A2DP V1.3, AVRCP V1.6
- Bluetooth frequency
- 2.4 - 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth transmitter power
- <9 dBm EIRP
- Bluetooth version
- 5.0
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC off (hours)
- 45
- Maximum music play time with ANC on (hours)
- 35
- Maximum play time (hours)
- 45
- Audio cable
- Yes
- Bluetooth
- Yes
- Charging cable
- Yes
- Voice Assistant integration
- Yes
- Adaptive Noise Cancelling
- Yes
- Ambient Aware
- Yes
- Carrying case
- Yes
- Fabric headband
- Yes
- Hands Free Call
- Yes
- JBL Charged Sound
- Yes
- Over-ear
- Yes
- Rechargable battery
- Yes
- Siri/ Google Now
- Yes
- Speed charge
- Yes
- Sweat Proof
- Yes
- TalkThru
- Yes
- Touch Control
- Yes
- Wireless
- Yes
- IP Code
- IPX4
Ultimate focus for the hardest workers.
UA Project Rock Over-Ear Training Headphones are tested and approved by Dwayne Johnson himself, built to help you grind harder—with Adaptive Noise Cancelling for ultimate focus, and a durable sweatproof construction. Washable Supervent ear cushions stay dry, and UA Storm Super Grip provides maximum stability. JBL Charged Sound is tuned to maximize motivation, and Bionic Hearing features TalkThru Technology for talking to training partners, and Ambient Aware Technology to hear surroundings. Give voice assistants quick commands and customize your sound with the JBL app. With up to 45-hours of playtime and a hardshell case there's nothing that will hold you back.
FAQs & How-Tos
-
The ear pads can be removed and washed.
To remove the ear pads, rotate them anti-clockwise to unlock (see image below).
The ear pads must be hand washed only, do not machine wash - the water temperature used should be in the range specified below. Then wait for the ear pads to fully dry.
Once fully dry, align the holes on the inside of the ear pads (highlighted with orange circles in the image below) with the clips on the headphones (located where the red arrows are pointing in the image below), now rotate the ear pad clockwise to lock the ear pads to the headphones again.
Was this helpful? Thank you for your feedback! -
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
This product is rated IP67, which is different from IPX7. IP67 protects the product from submersion in 1 meter (3.3 feet) of water for up to 30 minutes. It is also resistant against dust. Dust accumulation around electronics can lead to hardware failure, so the IP67 rating is an extremely beneficial addition to this product.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+44 161 222 3325
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
Chat with us
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00