UA Sport Wireless Train Project Rock – Engineered by JBL - Black - On-ear sport Headphones - Hero UA Sport Wireless Train Project Rock – Engineered by JBL - Black - On-ear sport Headphones - Front UA Sport Wireless Train Project Rock – Engineered by JBL - Black - On-ear sport Headphones - Detailshot 1
UA Sport Wireless Train Project Rock – Engineered by JBL - Black - On-ear sport Headphones - Hero
  • UA Sport Wireless Train Project Rock – Engineered by JBL - Black - On-ear sport Headphones - Swatch Image
  • UA Sport Wireless Train Project Rock – Engineered by JBL - Blue - On-ear sport Headphones - Swatch Image
  • UA Sport Wireless Train Project Rock – Engineered by JBL - Black Matte - On-ear sport Headphones - Swatch Image
  • UA Sport Wireless Train Project Rock – Engineered by JBL - White - On-ear sport Headphones - Swatch Image
  • UA Sport Wireless Train Project Rock – Engineered by JBL - Red - On-ear sport Headphones - Swatch Image

UA Sport Wireless Train Project Rock – Engineered by JBL

UA Sport Wireless Train Project Rock is built for the grind. SuperVent ear cushions relentlessly cool and always stay dry, while Under Armour grip material provides a soft feel and maximum stability. UA Train Project Rock headphones elevate every rep with premium audio drivers, producing bold wireless JBL Charged Sound. With all-new Bionic Hearing with TalkThru Technology, a simple touch of the UA logo, and TalkThru Technology is enabled so you can easily talk to your training partners or coach without needing to remove your headphones. Oversized controls are easy to access during an intense training session, and a 16-hour (max) battery with Speed Charge delivers up to an hour of playback on just five minutes’ charge. Tested and designed by athletes for durability, they’re sweat resistant and the Antibacterial ear cushions are removable and washable. With UA Sport Wireless Train Project Rock, you can get the most out of your workout.

Product Specifications

General Specifications

Bluetooth version 4.1
Driver size (mm) 40
IP Code IPX4

Audio Specifications

Dynamic frequency response range (Hz) 16–20,000Hz
Impedance (ohms) 32

Control Connect Specifications

Bluetooth profiles A2DP v1.3, AVRCP v1.5, HFP v1.6, HSP v1.2
Bluetooth frequency 2.402GHz – 2.48GHz
Bluetooth transmitter power < 4 dBm
Please consult the documents for in-depth specs

Documents & Downloads

What’s in the Box

  • 1 x Headphone
  • 1 x Charge cable
  • 1 x Audio cable
  • 1 x Extra set antibacterial cushions
  • 1 x Carry case
  • 1 x 12-month MapMyFitness™ Premium membership
  • 1 x Brahma bull sticker
  • 1 x Quick start guide
  • 1 x Safety sheet
  • 1 x Warranty card

FAQs & How-Tos

  • Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

    If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

    Category:

    Product information
  • How to Turn off your TWS Headphones

    1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).

    Category:

    Troubleshooting
  • aptX Audio Codec Support

    This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • My JBL Headphone App Support

    This headphone is not supported by the My JBL Headphone app.

    Category:

    Product information
  • Pairing issues with a Smartphone or Tablet

    1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.

    2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.

    3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.

    4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.

    5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.

    6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.

    You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.

    Category:

    Connectivity
  • Cleaning Instructions for Re-establishing Charging

    It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.

    Category:

    Troubleshooting
  • Is Volume Control Supported?

    This headphone does not feature volume control. You must manually control volume from your device.

Headphone Support Guide

Need help to resolve some the most common headphone challenges?

Learn more

Bluetooth Pairing Guide

Do you need help with Bluetooth Pairing? This guide can help you

Learn more

Register your product

Do you own this product?
Register it here!
And claim your warranty or service easily

Register now

Can’t find what you’re looking for?

Please note that UK delivery times are up to 10 working days.

However, due to current travel disruption to the UK, deliveries may take longer than planned.

We thank you for your patience.

Call us

Call us

Call us now at: +44 161 222 3325

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00