JBL Tune 660NC

JBL Tune 660NC

Wireless, on-ear, active noise-cancelling headphones.

Getting started with your JBL Tune 660NC

Getting started with your JBL Tune 660NC

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
32
Number of Microphones
2
Driver sensitivity at 1kHz/1mW (dB)
100
Dynamic frequency response range (Hz)
20Hz-20kHz
Impedance (ohms)
32
Weight (g)
166
Weight (oz)
5.9
Charging Cable Length (m)
0.2
Charging Cable Length (ft)
0.7
Ear Cup External Height (in)
2.9
Ear Cup External Width (in)
2.9
Ear Cup Internal Height (in)
1.3
Ear Cup Internal Width (in)
1.3
Ear Cup Depth (in)
0.7
Ear Cup External Height (cm)
7.3
Ear Cup External Width (cm)
7.3
Ear Cup Internal Height (cm)
3.2
Ear Cup Internal Width (cm)
3.2
Ear Cup Depth (cm)
1.7
Audio Cable Length (ft)
0.7
Audio Cable Length (m)
0.2
Bluetooth version
5.0
Bluetooth profiles
A2DP v1.3, AVRCP v1.5, HFP v1.6
Bluetooth frequency
2.402 GHz-2.480 GH
Charging time (hours from empty)
2
Maximum music play time with ANC on (hours)
44
Maximum play time (hours)
44
Remote control on ear cups?
Yes
On-ear
Yes
Foldable
Yes
Voice Assistant integration
Yes
Built-in Microphone
Yes
Detachable Cable
Yes
Hands Free Call
Yes
JBL Pure Bass Sound
Yes
Active Noise Cancelling
Yes
Wireless
Yes
Rechargable battery
Yes
Bluetooth
Yes

Your music, noise free

With the Tune 660NC Noise Cancelling headphones, you'll get great sound, noise-free! Enjoy JBL Pure Bass Sound for up to 44 hours with ANC on and then recharge in a flash (just 5 minutes for 2 extra hours of battery). Out of juice? Just plug in the additional detachable cable keep the flow going. Immediately pair the JBL Tune 660NC to your Android device thanks to Fast Pair enabled by Google. Then, use the handy buttons on the ear cup to control sound and calls and leave your device in your pocket. Choose the color that best suits your mood. Super light and flat foldable, they'll fit anywhere and be ready to light up your day.

Keep the noise out and enjoy your music.
For over 70 years, JBL has engineered the precise, impressive sound found in big venues around the world. These headphones reproduce that same JBL sound, punching out bass that’s both deep and powerful.
Listen wirelessly for 44 hours with active noise cancelling for long-lasting fun. Or for up to 55 hours with BT only. Get 2 hours extra with just a 5-minute charge using the convenient USB Type-C cable. Enjoy endlessly in wired mode, using the detachable cable provided.
Easily control your sound and manage your calls from your headphones with the convenient buttons and the mic on the ear-cup. Or use the ear-cup button to quickly reach your device's voice assistant.
Wirelessly stream high-quality sound from your smartphone or tablet without messy cords, thanks to Bluetooth 5.0.
Lightweight materials make these comfortable on your ears, and a rugged construction ensures these headphones fold and unfold perfectly over the years.
JBL Tune 660NC immediately pair to your Android device as soon as they are powered on, thanks to Fast Pair enabled by Google.

FAQs & How-Tos

5 results
  • Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • 1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.

    2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.

    3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.

    4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.

    5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.

    6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.

    You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.
  • If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.

    https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1 

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +44 161 222 3325

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

message

WhatsApp Us

Send us a message on +44 161 222 3325 or click  here 

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00