


JBL JR300
Product Specifications
General Specifications
Ear cushion material | PU leather |
---|---|
Headphones jack type | 3.5 mm |
Driver size (mm) | 32.0 |
Audio Specifications
Driver sensitivity at 1kHz/1mW (dB) | 85dB |
---|---|
Dynamic frequency response range (Hz) | 20 Hz - 20 kHz |
Impedance (ohms) | 32.0 |
Number of drivers per ear | 1.0 |
Dimension Specifications
Headphone cable length (cm) | 100.0 |
---|---|
Headphone cable length (ft) | 3.28 |
Weight (g) | 108.0 |
Weight (oz) | 3,8 |
Documents & Downloads
Spec Sheets
Gallery






Videos
What’s in the Box
- 1 x Pair of JBL JR300 headphones
- 1 x Stickers set
- 1 x Warranty card
- 1 x Warning card

FAQs & How-Tos
-
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback!
-
Multipoint Connectivity Information
These headphones do not support Multipoint Connectivity, which means that they can only be connected to one Bluetooth device at a time.Was this helpful? Thank you for your feedback!
-
Headphone Material Information
These headphones consist of plastics, synthetic leathers and foams. All JBL Jr products were put through extensive tests and are compliant with Standard Consumer Safety Specification for Toy Safety.
Was this helpful? Thank you for your feedback!
-
Does the JR 300 have a microphone?
No. The JR 300 is a standard plug and play headphone with no microphone or track features.
Was this helpful? Thank you for your feedback!
-
How many hours of audio playback time can I expect to receive on a full charge on the JR300BT?
You can expect up to 12 hours of audio playback on a full charge of the JR300BT. It also features a quick recharge battery to which you can recieve 1 hour of audio playback with only 10 minutes of charging time.
Was this helpful? Thank you for your feedback!
-
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.Was this helpful? Thank you for your feedback!
-
How do you power on a pair the JR 300BT headphones?
Press the power button located on the bottom of the Right Ear cup. If this is your first time using the headphones, it should immediately start looking for a device to connect to. Make sure that the device that you are trying to connect to is in pairing mode. The JBL JR300BT should display on your discoverable devices within 2-5 seconds. If the headphones have not successfully connected to the device, press and hold the Bluetooth button located next to the Power button on the Right Ear Cup for 2 seconds. As the headphones go into pairing mode, they should connect to your device within 2-5 seconds.
Was this helpful? Thank you for your feedback!
-
Microphone Information
Yes. This headphone has a built in microphone. To answer a call, press the power button which is located on the Left Ear Cup for 1 second. If you wish to hang up the call, press and hold the power button for 2 seconds.
Was this helpful? Thank you for your feedback!
-
Audio Cable Information
This headphone does not feature an audio cable jack. This is a Bluetooth only headphone.
Was this helpful? Thank you for your feedback!
-
Power and Pair Information
Press and hold the power button located on the RIGHT ear cup. Make sure that the device is on and in Bluetooth range. If this is the first time connecting the device, it will automatically go into pairing mode. You will notice the LED light alternate between blue and white as it searches for a device to connect to. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect.
Was this helpful? Thank you for your feedback!
-
Reset Information
To reset the headphones, power on the headphones and plug in the USB cable into a USB charger or USB port. Paired mobile devices should disconnect and the led should be constant white. When unplugging the USB cable, the headphones will power off. When manually powering on the headphones, and the last connected mobile phone is not in range, the headphones will revert to Bluetooth Pairing mode ( blue led will blink ) after 5 seconds. Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Please note that UK delivery times are up to 10 working days.
However, due to current travel disruption to the UK, deliveries may take longer than planned.
We thank you for your patience.
Chat with us
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00