|Ear cushion material||PU leather|
|Driver size (mm)||32.0|
|Dynamic frequency response range (Hz)||20 Hz - 20 kHz|
|Number of drivers per ear||1.0|
Control Connect Specifications
|Bluetooth profiles||HFP v1.5, HSP v1.2, A2DP v1.2, AVRCP v1.4|
|Bluetooth transmitted modulation||GFSK,π/4DQPSK, 8DPSK|
|Bluetooth transmitter power||0-4 dbm|
Documents & Downloads
Quick Start Guide
What’s in the Box
- 1 x Pair of JBL T450BT headphones
- 1 x Charging cable
- 1 x Quick start guide
- 1 x Warning Card
- 1 x Warranty Card
- 1 x Safety Sheet
FAQs & How-Tos
Can I replace the ear pads on my T-series headphone?
Yes, the ear pads are replaceable by owner. The pads can be purchased as spare parts from the service center, or purchased directly from the JBL spare parts web shop, when opened.
Can the JBL T450BT be charged while listening to music?
No, as soon as charging begins, the headphone shuts down. Since no option for cabled listening exists for this model, it is necessary to charge before listening is again possible.
How can I reset my JBL headphones?
With the headphones switched ON, press and hold the Volume + and Volume - buttons for more than 5 seconds. The LED blinks two colors, and now you have reset to factory settings.
Can the T450BT headphone play with cable as well as Bluetooth?
No, this model is made for Bluetooth use only. There is no option for cabled connection.
How can I see that my T450BT is fully charged?
The charging LED stops lighting white, and goes dark.
How many devices can I pair my T450 headphones to?
They support up to 8 paired devices without reset.
aptX Audio Codec SupportThis headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
My JBL Headphone App Support
This headphone is not supported by the My JBL Headphone app.
Can the ear pads of T450 and T450BT be replaced by owner?
Yes, T450 and T450BT ear pads can be removed and re-installed by owner. The pads are fixed by a lip going into a groove all the way around. Re-installation may need some care and time, but it can be done.
How Do I connect my T450BT via Bluetooth?
In normal use, T450BT pairing mode is automatic. First time it is switched on, it goes into pairing mode at once, shown by the blue LED blinking. After first pairing, if the last used source is not on when the T450BT is switched on, it will wait about 10 seconds with the LED showing white light, then it will switch to pairing mode, with the LED turning blue, and blinking. If you want to start pairing mode manually, make sure that the headphones are switched off, then press and hold the on/off button for more than 5 seconds. The headphones will now switch on in pairing mode, shown by the blue LED blinking.
How long is the cable on JBL T450?
The cable is approximately 125 cm long, including the 3.5 mm 4-pole plug. Please note that this is valid for the wired T450 only. The wireless version, T450BT, cannot be used with cable at all.
Can the JBL T450BT be used with a cable?
No, this is a Bluetooth only headphone. Charging is done with cable, of course, but there is no cabled audio connection.
Waterproof InformationThis product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.
Can’t find what you’re looking for?
Please note that UK delivery times are up to 10 working days.
However, due to current travel disruption to the UK, deliveries may take longer than planned.
We thank you for your patience.