UA Sport Wireless Flex – Engineered by JBL

The UA Sport Wireless Flex can be paired to multiple devices but cannot connect to more than once device at a time.

Yes. You have the ability to control the volume which is located on the RIGHT arm of the neckband.

Press the microphone button (located on the LEFT arm) to turn on the first RunSafe mode. The first mode blinks continually. When you press the microphone again, the second mode is initiated which features 2 blinks on followed by 2 seconds without. Pressing the microphone again is the third mode which is 3 blinks on followed by 3 seconds without.

Make sure the headphones are turned on and connected to your smart device. Press and hold the Microphone button located on the LEFT arm of the neckband. You should be able to activate Siri/Google within 3 seconds after pressing the Microphone button.

In order to pair to a different device, make sure the headphones are turned off. Proceed to press and hold the power button located on the LEFT arm of the neckband. You will hear the audio voice prompt state, “powering on” Continue to press and hold the power button for 3-5 seconds or until you hear the voice prompt state, “looking for device.” Make sure that the device you are attempting to connect to is in the Bluetooth search mode and within range. UA | JBL Flex should appear on your device within 3-8 seconds. Once you choose this option on your discoverable devices, it will connect and the voice prompt will state “Connected”

You can bend the ‘arms’ of the neck in and out to get the optimum fit for your exercise/level of activity. The flex zone is the black rubber part on the neckband.

The UA Sport Wireless Flex has size 3 (wingless) and the larger size 5 (winged). It also features three sizes of the small, medium, large inner ear tips. The unit comes with the size 5 Medium in ear tip on the unit out of the box.

Yes, the UA Sport Wireless Flex has an IPX5+ rating which makes it resistant to sweat and moisture.

The headphones feature a Speed Charge battery which allows you to receive a full hour of playback time after only charging the headphones for 5 minutes. To receive the full 12 hours of audio playback, it typically takes 1.5 hours of charging time.

Press and hold the circle power button for 3-5 seconds. This will be located on the LEFT arm of the neckband. We recommend having one or both ear tips in your ear to listen to the audio commands. Continue to press and hold until you hear the audible voice stating, “powering on.” If this is your first time powering on the headphones it will automatically go into pairing mode in which you will hear the audio voice prompt stating “looking for device”. Make sure that the device you are attempting to connect to is in the Bluetooth search mode and within range. UA | JBL Flex should appear on your device within 3-8 seconds. Once you choose this option on your discoverable devices, it will connect and the voice prompt will state “Connected. “ To power off the headphones, press and hold the circle power button for 2-3 seconds or until you hear the audible voice state, “Powering Off”