JBL Tune 215BT
Wireless Earbud headphones
Getting started with your JBL Tune 215BT
Documents & Downloads
- Driver size (mm)
- Number of Microphones
- Driver sensitivity at 1kHz/1mW (dB)
- 118 dB SPL@ 1kHz 1mW
- Dynamic frequency response range (Hz)
- 20 Hz – 20 kHz
- Impedance (ohms)
- Bluetooth version
- Bluetooth profiles
- HFP 1.7, A2DP 1.3, AVRCP 1.6
- Bluetooth frequency
- 2.400 GHz - 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, _x005F_x001F_/4 DQPSK, 8DPSK
- Bluetooth transmitter power
- < 6 dBm
- Charging time (hours from empty)
- Maximum play time (hours)
- Charging cable
- Built-in Microphone
- Flat Cable
- Hands Free Call
- JBL Pure Bass Sound
- Multi-Point Connection
- 3-Button Remote/ Mic
- Speed charge
- Rechargable battery
PURE BASS, WIRELESS
Introducing JBL TUNE 215BT wireless earbud headphones with JBL Pure Bass Sound. Thanks to the 16-hour battery life they can wirelessly stream high quality JBL Pure Bass sound and provide hands-free call management. Inside the premium housing is a pair of 12.5 mm drivers which will punch out some serious bass, while the soft, ergonomically shaped earbuds ensure the listening experience remains comfortable for long-listening hours. In addition, a three-button remote with mic on a tangle-free cable lets you control music and calls and access your devices' voice assistant. The multi-point connection allows you to never miss a call, making the JBL TUNE 215BT your everyday companion for work, at home and on the go.
FAQs & How-Tos
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
If you are experiencing issues with your headphones' Bluetooth disconnecting and reconnecting while on standby, there is a new Firmware Update app to resolve this issue. https://play.google.com/store/apps/details?id=com.jbl.tune.update
Below you can see step by step images of the update process.
Was this helpful? Thank you for your feedback!
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.Was this helpful? Thank you for your feedback!
There are several easy ways to prevent damage to your headphones, and please follow the steps below.
If the USB port has a cover, please always have it covered, except when charging.
Always be sure the USB port and connector are dry before connecting to charge.
Do not allow any oils, stains, sweat, or corrosive materials to contact the charging port. It will eventually damage the port.
Do not damage or block the USB port. For example, do not force it in if you have trouble inserting the USB connector into the port. Instead, examine the port and remove foreign substances that might be inside or blocking the port.
Was this helpful? Thank you for your feedback!
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback!
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1Was this helpful? Thank you for your feedback!