JBL Live Free NC+ TWS
True wireless Noise Cancelling earbuds
Sold from 2020 until now
Getting started with your JBL Live Free NC+ TWS
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Driver size (mm)
- 6.8
- Driver sensitivity at 1kHz/1mW (dB)
- 96
- Dynamic frequency response range (Hz)
- 20 Hz – 20 kHz
- Impedance (ohms)
- 16
- Number of drivers per ear
- 1
- Charging Case Weight (g)
- 40
- Charging Case Weight (oz)
- 1.4
- Earpiece Weight (g)
- 14
- Earpiece Weight (oz)
- 0.5
- Bluetooth profiles
- A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth frequency
- 2.4 GHz – 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth transmitter power
- 0 - 10dbm
- Bluetooth version
- 5.1
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC off (hours)
- 7
- Maximum music play time with ANC on (hours)
- 6
- Maximum play time (hours)
- 7
- Bluetooth
- Yes
- Voice Assistant integration
- Yes
- Active Noise Cancelling
- Yes
- Ambient Aware
- Yes
- Built-in Microphone
- Yes
- Charging case
- Yes
- Hands Free Call
- Yes
- JBL Signature Sound
- Yes
- Rechargable battery
- Yes
- Secure Fit
- Yes
- Sweat Proof
- Yes
- TalkThru
- Yes
- Touch Control
- Yes
- True Wireless
- Yes
- Waterproof
- Yes
- Wireless
- Yes
- IP Code
- IPX7
Live free from distractions
Take on the world, with style. JBL Live Free NC+ TWS earbuds deliver JBL Signature Sound with supreme comfort. Stay in the groove all day long without noise or any distractions thanks to Active Noise Cancelling, while TalkThru and Ambient Aware keep you in touch with your friends and surroundings. Up to 21 hours of battery life and in-case wireless charging gives you seamless, convenient ease of use, and Dual Connect + Sync means you can start listening immediately, with either earphone or both. With your choice of Voice Assistant, perfect calls, and intuitive controls right at your fingertips, you’ll never need to stop the music. Water and sweat proof, the JBL Live Free NC+ TWS won't let you down no matter your activity or the weather conditions. So you can live Free.
Make the everyday extraordinary. 6.8mm dynamic drivers power great JBL Signature Sound. These earbuds might be small, but they deliver some serious power.
No noise and zero distractions with Active Noise Cancelling, so you can get on with enjoying the groove. If you do need to chat, TalkThru and Ambient Aware allow for natural conversations and total awareness of your surroundings, without taking your earbuds out.
Dual Connect + Sync automatically pairs to your device as soon as you flip open the case, no matter which earbud you grab first. And you can extend battery life by switching out each earbud to charge individually. Thanks to Fast Pair enabled by Google, the JBL Live Free NC+ TWS are connected to your Android device the second you flip the case open. You can also pair multiple devices just by tapping on the devices’ screen.
No-one wants to be without their music. JBL Live Free NC+ TWS allows you to charge on the go with Speed Charge and Qi-compatible wireless charging. There’s up to 7 hours of music playback and up to 14 hours in the case. Keep on playing for longer.
Full control of your audio is just a fingertip away. You’ve got all the power in your earbuds. Manage phone calls with the tip of your finger and enjoy the perfect calls ensured by the integrated 4-mic solution on each bud. Dedicated touch control also lets you seamlessly talk to Hey Google (*) or activate Amazon Alexa (**).
(*) Only supported on Android. (**) Android 6.0 or higher is required for full access to Alexa features when using this device.
Don’t sweat the small stuff, JBL Live Free NC+ TWS are water and sweat proof, with IPX7 certification. They'll keep you company come rain or shine.
With three ear-tip sizes and two gel-sleeve sizes, you can easily customize your earbuds to get a perfect fit that'll stay in place during even your hardest workout.
FAQs & How-Tos
18 results
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback! -
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
Visit the App Store and download the ‘Amazon Alexa’ App.
- Click the Plus(+) button on the top right of the screen.
- Then select ‘Add Device‘.
- Select headphones from the list and then choose your Headphones from the list of available devices.
- Follow the rest of the instructions in the Alexa App to complete the setup.
Was this helpful? Thank you for your feedback! -
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
* Location
Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.Was this helpful? Thank you for your feedback! -
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.
You can change the default assistant in the ‘My JBL Headphones’ app:- Open the My JBL Headphones app on your device.
- Select the headphones you are connected too.
- Go to Settings by clicking the symbol in the top right corner.
- Select Voice Assistant.
- Now you can select your preferred voice assistant.
Your headphones may restart after switching Voice Assistant.Was this helpful? Thank you for your feedback! -
1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00