JBL Quantum 810 Wireless
Product Specifications
General Specifications
| Driver size (mm) | 50 |
|---|
Audio Specifications
| Passive Frequency Response | 20 Hz – 20 kHz |
|---|---|
| Active Frequency Response | 20 Hz – 40 kHz |
| Driver sensitivity at 1kHz/1mW (dB) | 95 |
| Dynamic frequency response range (Hz) | 20 Hz - 20 kHz |
| Impedance (ohms) | 32 |
Dimension Specifications
| Weight (g) | 418 |
|---|---|
| Weight (oz) | 14.7 |
| Charging Cable Length (m) | 1.5 |
| Charging Cable Length (ft) | 4.9 |
| Ear Cup External Height (in) | 3.8 |
| Ear Cup External Width (in) | 3.4 |
| Ear Cup Internal Height (in) | 2.4 |
| Ear Cup Internal Width (in) | 1.7 |
| Ear Cup Depth (in) | 1.1 |
| Ear Cup External Height (cm) | 9.7 |
| Ear Cup External Width (cm) | 8.7 |
| Ear Cup Internal Height (cm) | 6.2 |
| Ear Cup Internal Width (cm) | 4.2 |
| Ear Cup Depth (cm) | 2.7 |
| Audio Cable Length (ft) | 3.9 |
| Audio Cable Length (m) | 1.2 |
Control Connect Specifications
| Bluetooth version | 5.2 |
|---|---|
| Bluetooth profiles | A2DP 1.3, HFP 1.8 |
| Bluetooth frequency | 2400 MHz - 2483.5 MHz |
| Bluetooth transmitted modulation | GFSK, /4π DQPSK, 8DPSK |
| Bluetooth transmitter power | <12 dBm |
Documents & Downloads
Spec Sheets
Manuals
Quick Start Guide
Gallery
Videos
What’s in the Box
- 1 X JBL Quantum 810 Wireless headset
- 1 X USB Charging Cable
- 1 X 3.5 mm audio cable
- 1 X USB wireless dongle
- 1 X Windshield foam for microphone
- 1 X Quick Start Guide | Warranty card | Safety Sheet
FAQs & How-Tos
You might have to add a USB extension dock to get the JBL Quantum 350/600/800/810 dongle as close to the headset, or place the common sources of interference (e.g. routers, Wi-Fi speakers etc.) as far from the JBL Quantum 350/600/800/810 dongle.
| Make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume. If you're connected to the PC via USB, check that the default device is selected under Control Panel > Sound > Playback. Select JBL Quantum 600 or Quantum 800 Game, right-click, and select "Set as Default Device". Check your headset's game-chat balance dial and ensure that the balance is correct. Check the JBL Quantum 600 or Quantum 800 Game device and make sure it is not muted or turned all the way down. |
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V1.11.0.1511
Release Date: September 19, 2022
Release Media: Website & Quantum ENGINE
What’s New
- Improved firmware stability upgrading process flow for the QUANTUM 910.
------------------------------------------------------------------------
------------------------------------------------------------------------
QUANTUM ENGINE
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V1.11.0.1510
Release Date: August 24, 2022
Release Media: Website & Quantum ENGINE
What’s New
- Added support for the new QUANTUM 910 Wireless Headphones
- Over 30 improvements addressing user interface, usability, and stability of the app for a better user experience.
To turn ANC on and off
Short Press: ANC On (voice prompt states ANC On)
Short Press: ANC Off (voice prompt states ANC Off)
To turn TalkThru on and off
Long Press: TalkThru On (voice prompt states TalkThru On)
Short or Long Press: TalkThru Off, but ANC is now On (voice prompt states ANC On)
Short Press Again to turn ANC Off as well (voice prompt states ANC Off)
NOTE: The voice prompt will never state that TalkThru is Off.
JBL Quantum 400 and ONE are compatible with USB C to A cable to enjoy PS4 console with RGB Lighting on, and Quantum 600 and 800 with wireless-enabled by USB dongle also gives lighting moment on PS4 console games.
*NOTE that RGB will not light up when connecting with 3.5mm cable to any device (PC, Console, Mobile, etc.) because the cable doesn't have power enough for the RBG lighting.
The “Speaker” mode allows the JBL QuantumENGINE to receive more than two channels of audio. It also prevents some applications from adding extra signal processing intended for other headphones, which would negatively impact the performance of the JBL QuantumSURROUND or JBL QuantumSPHERE 360 technology.
JBL Quantum Headphones Upgrade tool redefines your headphones experience. Through your macOS device, you can now conveniently upgrade the headset.
Download from macOS app store: https://apps.apple.com/us/app/jbl-quantumengine/id1645040444
Supported models are:
- JBL Quantum 610
- JBL Quantum 810
- JBL Quantum 910
- JBL Quantum 910P
- JBL Quantum 910X
- JBL Quantum TWS
Hold the power button in the "On" position for 5 seconds on the headset, and then hold the button on the dongle for 5 seconds. This should force a manual pairing, allowing the PC to again recognize the headset.
Be sure to check multiple USB ports (to confirm it’s not an issue with the USB port).
If the dongle can’t be manually paired either, please contact customer support.
To update the headset, go to SYSTEM SOFTWARE tab, find section HEADSET, and press CHECK FOR UPDATE and then INSTALL UPDATE.
Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
How to check your PC settings for the correct recording device
1. Go to Control Panel
2. Select Hardware and Sound
3. Click on Sound
3 Select Recording
4. Make sure to select the proper recording device.
-
Right-click on it Quantum headset.
-
Now select "Set Default Device" or Select "Default Communication Device"
5. Check the microphone levels by right-click on your Quantum headset. Then click on Properties
6. Choose Levels.
7. Adjust accordingly.
Please also make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume.
Check that your headset's Game-Chat balance dial and ensure that the balance is correct, you might refer to the screenshot below from the QuantumEngine PC software.
If you still cannot hear the game or music audio, or if the volume is still very low, check if the TalkThrough is activated via the QuantumEngine software.
Finally, you can also do a short press on the Smart Ambient button on the headset (if your headset, has this feature)
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00