JBL Wave 200TWS

JBL Wave 200TWS

True Wireless Earbuds

Sold from 2022 until now

Getting started with your JBL Wave 200TWS

Getting started with your JBL Wave 200TWS

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
8
Driver sensitivity at 1kHz/1mW (dB)
108
Dynamic frequency response range (Hz)
20 Hz - 20 kHz
Impedance (ohms)
16
Number of drivers per ear
1
Charging Case Weight (g)
39.3
Charging Case Weight (oz)
1.4
Earpiece Weight (g)
8.7
Earpiece Weight (oz)
0.3
Bluetooth profiles
A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth frequency
2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4DQPSK, 8DPSK
Bluetooth transmitter power
0 - 12dbm
Bluetooth version
5.0
Charging time (hours from empty)
2
Maximum play time (hours)
20h (5h + 15h)
Bluetooth
Yes
Charging cable
Yes
Voice Assistant integration
Yes
Built-in Microphone
Yes
Charging case
Yes
Hands Free Call
Yes
Rechargable battery
Yes
True Wireless
Yes
Wireless
Yes

True Wireless Earbuds

Amp up your routine with the sound you love! Get powerful, JBL Deep Bass Sound and all the freedom of true wireless for up to 20 hours with the JBL Wave 200TWS. Take your world with you. Just a touch of the earbud manages your calls and music and puts you in touch with your voice assistant. And with dual connect you can use either earbud and save battery life. Ultra-light and comfortable, thanks to their ergonomic shape, the JBL Wave 200TWS are fun, ready-to-use.

Music just sounds better with JBL. And your day too. Feel the sound with the deep bass powered by the 8mm drivers and add fun to your routine.
With 5 hours in the earbuds and 15 hours in the case, the JBL Wave 200TWS don’t drop until you do. Or, when you need a quick power-up, you can Speed Charge another hour of battery life in just 15 minutes and for 2 hours for a full charge.
Now you can take calls or listen to music with either bud (or both), with dual connect technology. Choose which one to use and leave the other one in the case to save battery life.
Just a touch of the earbud is what you need to control calls, sound, your device's voice assistant and stay in touch with your world.
Ergonomically shaped, the JBL Wave 200TWS fit gently and comfortably in your ears thanks to their in-ear stick form, for hours of listening pleasure. They come with 3 sizes of ear tips to ensure a perfect seal for extra comfort and sound clarity.
Ready to get active? Featuring IPX2 rating, the JBL Wave 200TWS follow your flow, whether you chill or move, enduring light drops and a little sweat.
They go where you go. Discrete and lightweight in and out of the case, the JBL Wave 200TWS easily fit in your pocket. Choose the colour that fits your mood.

FAQs & How-Tos

6 results
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • The two earpieces of your TWS headphones should normally be connected together without issue.  However, if they are no longer paired to each other, please follow these steps, in order.
    1. Forget/unpair the headphones on your device.
    2. Manually pair the two earpieces together following the "Manual Pairing Left & Right" instructions in your Owner's Manual/Quick Start Guide.
    3. Pair the headphones to your device and see if this resolves the problem.
    4. If manual pairing does not fix the problem, forget/unpair the headphones on your device again.
    5. Initiate a Product Reset to reset the earbud’s Bluetooth connection.
      • Note that RESET will wipe all previous settings and pairings, so it will be necessary to pair your headphones with your devices again
      • Follow the Product Reset instructions in your Owner's Manual/Quick Start Guide.
      • Manually pair the 2 buds together again, as you did in step 2.  This additional step is necessary because, by default, the reset procedure does not automatically pair the two ear pieces together, but it does wipe all previous settings and resets the internal processor, so it is necessary to manually pair the two ear pieces together again.
      • Pair the buds to your Source Device.
  • If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.

    https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1 

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +44 161 222 3325

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

message

WhatsApp Us

Send us a message on +44 161 222 3325 or click  here 

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00