JBL Vibe 100TWS
True Wireless Earbuds
Sold from 2021 until now
Getting started with your JBL Vibe 100TWS
Documents & Downloads
Product Specifications
- Driver size (mm)
- 8
- Driver sensitivity at 1kHz/1mW (dB)
- 105.5
- Dynamic frequency response range (Hz)
- 20 Hz – 20 kHz
- Impedance (ohms)
- 16
- Number of drivers per ear
- 1
- Charging Case Weight (g)
- 36.1
- Charging Case Weight (oz)
- 1.3
- Earpiece Weight (g)
- 10.2
- Earpiece Weight (oz)
- 0.4
- Bluetooth profiles
- A2DP V1.3 AVRCP V1.6 HFP V1.7
- Bluetooth frequency
- 2.4 GHz – 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth transmitter power
- 0 - 10dbm
- Bluetooth version
- 5.0
- Charging case battery life (max hours)
- 15
- Charging time (hours from empty)
- 2
- Maximum play time (hours)
- 5
- Bluetooth
- Yes
- Charging cable
- Yes
- Built-in Microphone
- Yes
- Charging case
- Yes
- Hands Free Call
- Yes
- Rechargable battery
- Yes
- Controls on Ear Cups?
- Yes
- Speed charge
- Yes
- Sweat Proof
- Yes
- True Wireless
- Yes
- Wireless
- Yes
- IP Code
- IPX2
True Wireless Earbuds
Great sound, no-frills and no-wires? Simple: JBL Vibe 100TWS. Powered by JBL Deep Bass Sound, these true wireless headphones color your day with up to 20 hours of playback. Total freedom from wires means hands-free calls and full comfort. Immediately paired and independent thanks to dual connect, music, calls and voice assistant can be controlled from the earbud, so you can keep the flow going. Enjoy daily!
FAQs & How-Tos
-
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
Make sure both headphones are fully charged to ensure that the issue is not due to one of the earbuds lacking power.
Check that the contact points on the headphones and the charging case are clear of dirt, so the issue is not due to the product not being able to charge.
The LED on the headphones will show a blue light when correctly inserted in the charging case.
Try to reset the headphones if the product is fully charged but are still only working in Mono mode.
A reset guide for the headphones can be found here: Reset guide
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00