JBL Tune 510BT
|Driver size (mm)||32|
|Maximum music playing time (hrs)||40|
|Driver sensitivity at 1kHz/1mW (dB)||103.5|
|Dynamic frequency response range (Hz)||20 Hz – 20 kHz|
|Charging Cable Length (m)||0.2|
|Charging Cable Length (ft)||0.7|
|Ear Cup External Height (in)||2.9|
|Ear Cup External Width (in)||2.9|
|Ear Cup Internal Height (in)||1.3|
|Ear Cup Internal Width (in)||1.3|
|Ear Cup Depth (in)||0.7|
|Ear Cup External Height (cm)||7.3|
|Ear Cup External Width (cm)||7.3|
|Ear Cup Internal Height (cm)||3.2|
|Ear Cup Internal Width (cm)||3.2|
|Ear Cup Depth (cm)||1.7|
Control Connect Specifications
|Bluetooth profiles||A2DP v1.3, AVRCP v1.6, HFP v1.7|
|Bluetooth frequency||2.4 GHz – 2.4835 GHz|
|Bluetooth transmitted modulation||GFSK, _x001E_/4DQPSK,8DPSK|
|Bluetooth transmitter power||<8 dBm|
Documents & Downloads
Quick Start Guide
What’s in the Box
- 1 x JBL Tune 510BT
- 1 x USB-C Charging Cable
- 1 x Quick Start Guide
- 1 x Warranty/Warning
FAQs & How-Tos
Pairing issues with a Computer or PCIn most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
How to avoid Bluetooth Interference or Interruptions• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
My JBL Headphone App Support
This headphone is not supported by the My JBL Headphone app.
Can my headphones be connected to two devices simultaneously?Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.
Pairing issues with a Smartphone or Tablet1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.
2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.
3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.
4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.
5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.
6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.
You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Can’t find what you’re looking for?
Please note that UK delivery times are up to 10 working days.
However, due to current travel disruption to the UK, deliveries may take longer than planned.
We thank you for your patience.