JBL Live 460NC
In your world, superior sound is essential, as it's being in the zone. So slip on a pair of JBL Live 460NC headphones and get both. Equipped with massive 40mm drivers, JBL Live 460NC headphones deliver JBL Signature Sound, punctuated with enhanced bass so every track on every playlist pops. Activate the Adaptive Noise Cancelling if focusing is what you need and Smart Ambient if you want to keep in touch with your environment. Need some help getting through the day? Get help from Hey Google (*) or Alexa (**) using your voice or with a tap on the earcup. Activate ANC or Ambient Aware, check the battery life or power off your JBL Live 460NC simply with your voice with Hey Google (*). Magic! Lightweight and comfortable thanks to the pillow-soft padded headband, you’ll enjoy up to 50 hours of music streaming with ANC off, perfect stereo calls and a convenient detachable audio cable, that lets you rock on even when the battery goes off. When not in use, your Live 460NC automatically pause and resume playing when picked up again. Rock out while staying tuned in with the JBL Live 460NC headphones.
(*) Only supported on Android. (**) Android 6.0 or higher is required for full access to Alexa features when using this device.
Product Specifications
General Specifications
| Driver size (mm) | 40 |
|---|---|
| Number of Microphones | 2 |
Audio Specifications
| Driver sensitivity at 1kHz/1mW (dB) | 96 |
|---|---|
| Dynamic frequency response range (Hz) | 20Hz – 20kHz |
| Impedance (ohms) | 32 |
Dimension Specifications
| Weight (g) | 210 |
|---|---|
| Weight (oz) | 7.4 |
| Charging Cable Length (m) | 0.2 |
| Charging Cable Length (ft) | 0.7 |
| Ear Cup External Height (in) | 2.6 |
| Ear Cup External Width (in) | 2.6 |
| Ear Cup Internal Height (in) | 1.4 |
| Ear Cup Internal Width (in) | 1.4 |
| Ear Cup Depth (in) | 0.6 |
| Ear Cup External Height (cm) | 6.7 |
| Ear Cup External Width (cm) | 6.7 |
| Ear Cup Internal Height (cm) | 3.5 |
| Ear Cup Internal Width (cm) | 3.5 |
| Ear Cup Depth (cm) | 1.5 |
| Audio Cable Length (ft) | 3.9 |
| Audio Cable Length (m) | 1.2 |
Control Connect Specifications
| Bluetooth version | 5.0 |
|---|---|
| Bluetooth profiles | HFP V1.7, A2DP V1.3, AVRCP V1.6 |
| Bluetooth frequency | 2.402GHz – 2.48GHz |
| Bluetooth transmitted modulation | GFSK, π/4 DQPSK, 8DPSK |
| Bluetooth transmitter power | <13dBm |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery
Videos
What’s in the Box
- 1 x JBL Live 460NC
- 1 x Type-C Charging Cable
- 1 x Audio cable
- 1 x Quick Start Guide/Safety Sheet
- 1 x Warranty/Warning
FAQs & How-Tos
How to use Amazon Alexa with your headphones
After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
Things to try
While Alexa is talking, press and release the Action button then say “Stop”.
For more information and things to try with Alexa, visit: www.amazon.com/alexadevices
Things to try
- “What’s the weather?”
- Play Niall Horan
- Play NPR on iHeartRadio
- Set a timer for 5 minutes
- What new skills do you have?
While Alexa is talking, press and release the Action button then say “Stop”.
For more information and things to try with Alexa, visit: www.amazon.com/alexadevices
Was this helpful?
Thank you for your feedback!
How to connect your headphones to the Amazon Alexa for Android and iOS devices
Visit the App Store and download the ‘Amazon Alexa’ App.
- Click the Plus(+) button on the top right of the screen.
- Then select ‘Add Device‘.
- Select headphones from the list and then choose your Headphones from the list of available devices.
- Follow the rest of the instructions in the Alexa App to complete the setup.
Was this helpful?
Thank you for your feedback!
How to use Google Assistant with your headphones
After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones
Get your notifications
Double-tap the Action button.
Stop your Google Assistant
Touch the Action button.
Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.
For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones
Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones
Get your notifications
Double-tap the Action button.
Stop your Google Assistant
Touch the Action button.
Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.
For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones
Was this helpful?
Thank you for your feedback!
Can my headphones be connected to two devices simultaneously?
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.
Was this helpful?
Thank you for your feedback!
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
Was this helpful?
Thank you for your feedback!
How to switch between voice assistants using the My JBL Headphone app
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.
You can change the default assistant in the ‘My JBL Headphones’ app:
Your headphones may restart after switching Voice Assistant.
You can change the default assistant in the ‘My JBL Headphones’ app:
- Open the My JBL Headphones app on your device.
- Select the headphones you are connected too.
- Go to Settings by clicking the symbol in the top right corner.
- Select Voice Assistant.
- Now you can select your preferred voice assistant.
Your headphones may restart after switching Voice Assistant.
Was this helpful?
Thank you for your feedback!
My JBL Headphones App Support
This headphone is supported by the My JBL Headphones App.
Was this helpful?
Thank you for your feedback!
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
Was this helpful?
Thank you for your feedback!
Trouble accessing the Google Assistant or Amazon Alexa on your Headphone
First, ensure that you have the Google Assistant or Amazon Alexa apps installed on your device, depending on the voice assistant you want to use. Go to your app store to download the intended voice assistant app, then add your headphones as a device in the app if necessary. Finally, enable the intended voice assistant in the settings of the My JBL Headphones app and assign which earbud you want to use to control it. The voice assistant app must be open for it to work correctly. It can be opened from within the My JBL Headphones app by tapping the name of the required voice assistant after you have selected it for use and assigned a gesture to one of your earbuds to control it.
Was this helpful?
Thank you for your feedback!
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful?
Thank you for your feedback!
Pairing issues with a Smartphone or Tablet
1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.
2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.
3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.
4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.
5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.
6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.
You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.
2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.
3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.
4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.
5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.
6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.
You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.
Was this helpful?
Thank you for your feedback!
How to connect your headphones to the Google Assistant for iOS devices
Visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:
PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.
Step 1
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:
Step 2
PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful?
Thank you for your feedback!
How to connect your headphones to the Google Assistant for Android devices
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.
Step 1
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:
Step 2
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00