JBL Tune 205BT - Green - Wireless Earbud headphones - Hero JBL Tune 205BT - Green - Wireless Earbud headphones - Front JBL Tune 205BT - Green - Wireless Earbud headphones - Back
JBL Tune 205BT - Green - Wireless Earbud headphones - Hero
  • JBL Tune 205BT - Green - Wireless Earbud headphones - Swatch Image
  • JBL Tune 205BT - Champagne Gold - Wireless Earbud headphones - Swatch Image
  • JBL Tune 205BT - Black - Wireless Earbud headphones - Swatch Image
  • JBL Tune 205BT - Blue - Wireless Earbud headphones - Swatch Image
  • JBL Tune 205BT - Silver - Wireless Earbud headphones - Swatch Image
  • JBL Tune 205BT - Rose Gold - Wireless Earbud headphones - Swatch Image

JBL Tune 205BT

Introducing JBL TUNE 205BT wireless earbud headphones with JBL Pure Bass Sound. Thanks to the 6-hour (max) battery life they can wirelessly stream JBL Pure Bass sound and provide hands-free call management. Inside the premium housing is a pair of 12.5 mm drivers which will punch out some serious bass, while the soft, ergonomically shaped earbuds ensure the listening experience remains comfortable for long-listening hours. In addition, a single-button remote lets you control music playback, as well as answer calls on the fly with the built-in microphone, making the JBL TUNE 205BT your everyday companion for work, at home and on the go.

Product Specifications

General Specifications

Driver size (mm) 12.5

Audio Specifications

Driver sensitivity at 1kHz/1mW (dB) 100dB SPL/1mw
Dynamic frequency response range (Hz) 20 Hz - 20 kHz
Impedance (ohms) 32.0
Number of drivers per ear 1.0

Dimension Specifications

Headphone cable length (cm) 78.0
Headphone cable length (ft) 2.56
Weight (g) 16.5
Weight (oz) 0.58

Control Connect Specifications

Bluetooth frequency 2.402GHz-2.48GHz
Bluetooth transmitted modulation GFSK,DQPSK, 8-DPSK
Bluetooth transmitter power 0~4 dbm
Bluetooth version 4.1
Please consult the documents for in-depth specs

Documents & Downloads

What’s in the Box

  • 1 x Pair of JBL Tune 205BT headphones
  • 1 x Charging cable
  • 1 x Quick Start Guide
  • 1 x Warning card
  • 1 x Warranty card
  • 1 x Safety sheet
JBL Tune 205BT - What's in the Box

FAQs & How-Tos

  • aptX Audio Codec Support

    This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • Does the microphone feature volume and track control on the Tune 205BT?

    Yes, the microphone allows you to skip tracks and control volume. To skip tracks forward, press and hold the volume + for 3 seconds. To skip tracks backward, press and hold the volume - for 3 seconds.

  • Waterproof Information

    This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.

    Category:

    Product information
  • How many hours of playback time can I expect on a full charge on the Tune 205BT?

    You can receive up to 6 hours on a full charge. Please note that volume levels and what you listen to can effect battery life.

  • How do I power on and pair the Tune 205BT?

    Make sure that the device you want to connect to is on and in pairing mode. Press and hold the center button on the inline microphone for 3-5 seconds. (We recommend putting one ear tip inside your ear to hear the audio prompt) You should here "powering on.....pairing" as it searches for your device. The Tune 205BT headphone should appear on your discoverable devices and should connect within 2-3 seconds. If you wish to pair to a different device, make sure the last device it was connected to has the bluetooth turned off. Make sure the headphones are off and press and hold the center button between 3-5 seconds or until the audio prompt states that it is "looking for device" You should be able to pair with a different device within 2-3 seconds.

  • Are there different sized ear tips for the Tune 205BT?

    There are no additional ear tips for the Tune 205BT. These headphones do not feature different size ear tip variations.

  • Multipoint Connectivity Information

    These headphones do not support Multipoint Connectivity, which means that they can only be connected to one Bluetooth device at a time. 

    Category:

    Product information
  • How can I reset the headphones?

    Press volume + and volume - simultaneously for 5 seconds to reset.
    The headphone must be ON while doing this.

    Category:

    Product information
  • My JBL Headphone App Support

    This headphone is not supported by the My JBL Headphone app.

    Category:

    Product information

Headphone Support Guide

Need help to resolve some the most common headphone challenges?

Learn more

Bluetooth Pairing Guide

Do you need help with Bluetooth Pairing? This guide can help you

Learn more

Register your product

Do you own this product?
Register it here!
And claim your warranty or service easily

Register now

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +44 161 222 3325

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00