JBL Stadium GTO 20M

JBL Stadium GTO 20M

Stadium GTO20M 2" (50mm) dome midrange w/ bandpass crossover enclosure

Getting started with your JBL Stadium GTO 20M

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Power Handling
65Wrms, 195W peak
Sensitivity (@ 2.83V)
90dB
Frequency Response
500Hz – 7kHz
Voice Coil Diameter
1-3/4 in. (44mm)
Impedance
2.5 ohms

Ultimate Car Audio by JBL

JBL—speaker of choice for the world's top recording studios, concert events and movie theaters, delivers a world class listening experience to car audio with the new Stadium speakers. Unmistakably JBL. The high output 2 ohm design extracts every watt of power from the amplifier or head unit enabling the patented Plus One™ woofers to deliver an impressive wallop for mega volume aficionados. Sophisticated crossovers coupled with soft dome tweeters produce smooth as silk highs with extraordinary detail even at the highest volume levels. An optional midrange speaker with bandpass crossover provides seamless integration with woofer and tweeter, transforming a two-way component system into a three-way system for another magnitude of sound. Rigorous OEM-level reliability testing provides peace of mind when it's time to crank it up for that inimitable JBL adrenalin surge.

Stadium GTO20M 2" (50mm) dome midrange with bandpass crossover
Plus One™ glass fiber woofer cones are lighter and stiffer with up to 25 percent more active cone-area than the competition. The result is remarkably accurate sound with high SPL performance. The hi-roll rubber surrounds allow the woofer cone to move freely and emit bolder bass.
Oversized voice coils with extra copper and surface area serves to dissipate the heat for improved reliability, enabling maximum power handling with low distortion.
Home theater quality soft dome tweeters deliver broader and smoother high frequency response. A push-button tweeter level control (+0 dB flat and +3 dB) provides custom tuning of high frequencies in most multi-element speakers.
Crossovers on component systems are gap-switchable to accommodate a midrange upgrade. The optional midrange includes a bandpass crossover to convert a two-way system into a three-way system with perfect tonal balance and is designed to fit into many factory three-way applications.
High output 2 ohm design with low impedance voice coils extracts every watt from the amplifier, delivering peak power with ease. Lower impedance also compensates for any added resistance in thin factory-installed wiring.
JBL speakers have to go through environmental testing that would destroy other speakers. JBL freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.
JBL employs second order filters for tweeters and sophisticated two-way crossovers for multi-element speakers and component systems resulting in higher power handling and added flexibility and accuracy when tuning speakers. A higher quality crossover allows JBL's wizards to consider speaker acoustic characteristics as well as specifications when tuning the JBL sound.
The modern exterior design and premium finishes of Stadium speakers further reflect the quality of JBL engineering. In short, they look as good as they sound.

FAQs & How-Tos

1 results
  • The Stadium GTO 20M is intended for use with the Stadium GTO two-way systems, or to replace existing midrange speakers in systems that are already three-way from the start. The Stadium GTO two-way component systems are 3-way upgradeable. The crossovers are gap-switchable to accommodate a midrange upgrade. The optional Stadium GTO 20M midrange includes a bandpass crossover to convert a two-way system into a threeway system with perfect tonal balance. You simply connect both crossovers to the speaker wires from your car amplifier in parallel, and set the existing GTO two-way crossover to GAP function. Stadium GTO 20M is designed to also fit into many factory three-way applications. Please note that you cannot use this add-on midrange with coaxial car speakers, unless you can access the crossover networks to establish the midrange gap that the extra midrange is meant to occupy.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +44 161 222 3325

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

message

WhatsApp Us

Send us a message on +44 161 222 3325 or click  here 

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00