Présentation du centre d’assistance / Enceintes / Stéréo & Son Surround / Caissons d’extrêmes graves / SUB150P
SUB150P

SUB150P

Add big bass to any multichannel audio system

Familiarisez-vous avec votre $produit

Product Registration

Enregistrer votre produit

Possédez-vous ce produit ? Enregistrez-le ici ! Et faites facilement une réclamation sous garantie ou une demande d’intervention

Enregistrez votre appareil dès maintenant

Documents et téléchargements

Caractéristiques du produit

Finish
Black
Enclosure Type
Ported
Series
Studio 1 Series
Crossover Frequencies
50Hz – 150Hz (variable), 24dB/octave
Frequency Response
27Hz – 150Hz
Height (mm)
470
Height (in)
18-1/2
Weight (lb)
39.7
Width (mm)
441
Weight (kg)
18
Depth (mm)
441
Depth (in)
17-3/8
Width (in)
17-3/8
Connections
Line-Level/LFE input
Controls
Phase switch, Input Mode switch, Volume Control, Crossover Control
Amplifier Power (RMS)
300W
Amplifier Power (Peak)
500W
Power Consumption (Full Power/Idle)
320W (1.8A @ 230V) peak; less than 6W (0.06A@ 120V) standby
Power Requirement
120V, 60Hz (US); 220V – 230V, 50Hz/60Hz (EU)
Low-Frequency Transducer
Fast 10-inch (250mm) PolyPlasTM low-frequency transducer

Listen with more than just your ears.

Powered subwoofers bring visceral excitement to film soundtracks and are an indispensable component of any serious multichannel audio system. But too many are too big. They dwarf other system components. And many front-firing systems require special placement within a room for even basic, decent performance. But the JBL® SUB150P is different. It’s a 10-inch (250 mm), 300W down-firing transducer in a compact, trapezoidal reflex enclosure that fits just about anywhere. It connects to virtually any A/V receiver and works with virtually any speakers. Why go without emotional impact bass another day?

An integral 300-watt RMS (500 watts peak power) amplifier means that the Studio SUB150P subwoofer can develop high-energy sound levels without adding unwanted artifacts. A built-in limiter prevents the distortion that results from sudden peak levels and thereby turns a sound experience from the merely impressive into the completely immersive.
The Studio SUB150P features a 10-inch (250-millimeter) low-frequency transducer that delivers chest-thumping audio – but it’s accurate enough to articulate individual sounds at sustained low frequencies. Such immersive bass creates a foundation that is powerful enough to support an entire surround-sound experience.
Energy efficiency is a priority; so too is low heat output. The Studio SUB150P’s built-in digital amplifier fulfills both functions but doesn’t skimp on your primary requirement: powerful, low-frequency sound.
Unlike other subwoofers, the Studio SUB150P is not housed within a sealed enclosure. Instead, the SUB150P features a bass-reflex enclosure, which provides movie soundtracks and music with the breathing room they need to sound realistic with little or no distortion.
The Studio SUB150P’s driver fires downwards instead of outwards, a configuration that prevents unwanted interaction with walls and the sound reflections that result from the interaction. Instead, sound travels upwards through the room, resulting in clean, crisp bass. As a result, you can place the SUB150P anywhere in a room without worrying that it’ll produce the artificial “boominess” that can detract from the realism of a surround-sound experience.
A two-position phase switch ensures that the Studio SUB150P’s bass transducer moves in sync with your main loudspeakers. The subwoofer’s low frequencies will blend seamlessly with sounds from other speakers, regardless of where you put the subwoofer. Also, an adjustable crossover frequency lets you optimize the Studio SUB150P for different choices of main/satellite loudspeakers.
A choice of LFE (low-frequency effects) or line-level inputs means that you can either use or bypass the Studio SUB150P subwoofer’s internal crossover circuits. Such an option provides greater flexibility in how you set up and use the SUB150P, while it ensures noise-free connections to virtually any type of AV amplifier or sound center.
The JBL Weave design is a perfect convergence of form and function. Able to stand out or blend in with the finest décor, the Weave makes the Studio SUB150P powered subwoofer’s trapezoidal enclosure is as functional as it is pleasant to the eye.

Images et vidéos

SUB150P - Black - Powerful 300-watt 10 inch Powered Subwoofer - Hero
  • SUB150P - Black - Powerful 300-watt 10 inch Powered Subwoofer - Hero
  • SUB150P - Black - Powerful 300-watt 10 inch Powered Subwoofer - Front
  • SUB150P - Black - Powerful 300-watt 10 inch Powered Subwoofer - Back

Vous ne trouvez pas ce que vous recherchez ?

Appelez-nous

Appelez-nous

Appelez-nous dès maintenant au: +33 178429982

Lundi - Vendredi: 09:00-18:00
Samedi - Dimanche: 10:00-16:00

Envoyez-nous un e-mail

Envoyez-nous un e-mail

Nous sommes disponibles du lundi au dimanche pour répondre à votre e-mail aussi vite que possible !

Envoyez-nous un e-mail
Discutez avec nous

Discutez avec nous

Lundi - Vendredi: 09:00-18:00
Samedi - Dimanche: 10:00-16:00

message

Contactez-nous par WhatsApp

Envoyez-nous un message au +33 178429982 ou cliquez- ici 

Lundi - Vendredi: 09.00-18.00
Samedi - Dimanche: 10:00-16:00