BAR 300
5.0-kanavainen kompakti soundbar-kaiutin MultiBeam™-tekniikalla ja Dolby Atmos® -äänellä
Getting started with your BAR 300
Documents & Downloads
Product Specifications
- Virtalähde
- 100–240 V AC, ~ 50/60 Hz
- Verkon valmiustilan tehontarve
- < 2,0 W
- Käyttölämpötila
- 0–45 °C
- Kaiuttimen kokonaislähtöteho (kun @THD enintään 1 %)
- 260 W
- Soundbar-kaiutinelementti
- neljä 46 x 90 mm:n ovaalielementtiä, kaksi 20 mm:n (0,75") diskanttielementtiä
- Taajuusvaste
- 50 Hz – 20 kHz (-6 dB)
- Audiotulot
- 1 optinen, Bluetooth, USB (USB-toisto on saatavilla Yhdysvaltain mallissa; muissa malleissa USB on vain huoltoa varten.)
- Soundbar-kaiuttimen mitat (L x K x S)
- 820 x 56 x 103,5 mm / 32,3 x 2,2 x 4,1 tuumaa
- Soundbar-kaiuttimen paino
- 2,5 kg / 5,5 lbs
- Pakkauksen mitat (L x K x S)
- 1 060 x 120 x 170 mm / 41,7" x 4,7" x 6,7"
- Pakkauksen paino
- 4,1 kg / 9 lbs
- USB-portti
- A-tyyppi
- USB-luokitus
- 5 V tasavirta, 0,5 A
- Tuetut tiedostomuodot
- MP3
- MP3-koodekki
- MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG 2.5 Layer 3
- MP3-näytteenottonopeus
- 16–48 kHz
- MP3-bittinopeus
- 80–320 kpbs
- Bluetooth-versio
- 5.0
- Bluetooth-profiili
- A2DP 1.2, AVRCP 1.5
- Bluetooth-lähettimen taajuusalue
- 2 400 MHz – 2 483,5 MHz
- Bluetooth-lähettimen teho
- < 15 dBm (EIRP)
- Wi-Fi-verkko
- IEEE 802.11 a/b/g/n/ac/ax (2,4 GHz / 5 GHz)
- 2,4 G:n Wi-Fi -lähettimen taajuusalue
- 2 412–2 472 MHz (2,4 GHz:n ISM-kaista, Yhdysvallat 11 kanavaa, Eurooppa ja muut 13 kanavaa)
- 2,4G Wi-Fi -lähettimen teho
- < 20 dBm (EIRP)
- 5 G:n Wi-Fi -lähettimen taajuusalue
- 5,15–5,35 GHz, 5,470–5,725 GHz, 5,725–5,825 GHz
- 5 G:n Wi-Fi-lähettimen teho
- 5,15–5,25 GHz < 23 dBm, 5,25–5,35 GHz ja 5,47–5,725 GHz < 20 dBm, 5,725–5,825 GHz < 14 dBm (EIRP)
- HDMI-videosisääntulo
- 1
- HDMI-videolähtö (tehostetulla äänen paluukanavatoiminnolla eARC)
- 1
- HDMI:n HDCP-versio
- 2.3
- HDR-läpivienti
- HDR10, Dolby Vision
Näytös alkaa. Monipuolinen JBL Bar 300 -kaiutin tarjoaa mahdollisuuden nauttia aidosta elokuva- ja TV-kokemuksesta ja nostaa pelit seuraavalle tasolle. MultiBeam™- ja Dolby Atmos® -tekniikat tuottavat eloisaa 3D-surround-ääntä. PureVoice-tekniikka optimoi puheäänen selkeyden ja varmistaa, ettei sanaakaan jää kuulematta. Kun olet valmis rentoutumaan musiikin tai podcastin parissa, valitse haluamasi yli 300 suoratoistopalvelusta ja nauti niistä AirPlaylla, Alexa MRM:llä tai Chromecast built-in™ -tekniikalla.
FAQs & How-Tos
-
Yes!
By using the JBL ONE app, you can change the equalization settings of the speaker to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:- BASS: Adjust the lower frequency sounds, such as bass or a kick drum.
- MID: Adjust the mid-frequency sounds, such as human speech.
- TREBLE: Adjust the higher frequency sounds for clarity.
Was this helpful? Thank you for your feedback! -
Yes, however, the JBL ONE App gives you another level of control over the speaker/soundbar.
Through the App, you can personalize the speaker/soundbar's performance, such as:- Customizing EQ settings
- Setting up our new feature called: My Moment
- Connect your favorite streaming music services.
Was this helpful? Thank you for your feedback! -
No, the JBL Bar 300/500 does not support DTS.
It supports the following Dolby Audio formats:
Dolby Atmos
Dolby Digital
Multichannel PCMWas this helpful? Thank you for your feedback! -
Once the speaker/soundbar is connected to the network, software updates will automatically be sent to the product through Wi-Fi or the internet, if availableWas this helpful? Thank you for your feedback!
-
In the JBL ONE App:
(1) Go to My Products, select your product
(2) Select Support tile
(3) Under General, select Product SupportWas this helpful? Thank you for your feedback! -
If you cannot stream music with AirPlay, use the JBL One App;
(1) Go to Settings.
(2) Select 3rd Party Service.
(3) Select the Airplay tile.
(4) Select Reset AirPlay.Was this helpful? Thank you for your feedback! -
(1) Select the JBL speaker/soundbar you want to rename
(2) Navigate to the Support tile and select "Rename My Product."
(3) Press the current name and type in the new name
(4) Press SAVEWas this helpful? Thank you for your feedback! -
The factory reset button restores your device to the default settings, including network and audio configurations.
Please use one of the following solutions:- Press and hold VOL -, VOL +, and Source buttons on the device at the same time until the LED light flashes (hold for more than 5 seconds)
- Open your JBL ONE App.
- Navigate to the support tile.
- Select RESTORE FACTORY SETTINGS.
Was this helpful? Thank you for your feedback! -
(1) Use JBL One App to set up the My Moment Feature.
(2) Select the JBL speaker/soundbar you want to set your favorite music to the My Moment feature.
(3) Tap the My Moment card to assign music.
(4) Click Add Music to manage music streaming services and specific music tracks.
(5) Set the timer to inactive speaker/soundbar (optional)
(6) Set the music loudness (optional)
(7) Press SAVEWas this helpful? Thank you for your feedback! -
The JBL Bar 300 does not support a subwoofer. Alternatively the JBL Bar 500 has a wireless subwoofer included.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+358 972 522 301
Monday - Friday: 10:00 - 18:00
Chat with us
Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00