JBL Wave Flex

JBL Wave Flex

Aidosti langattomat nappikuulokkeet

Getting started with your JBL Wave Flex

Getting started with your JBL Wave Flex

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Elementin koko (mm)
12
Number of Microphones
1
Elementin herkkyys @ 1kHz/1mW (dB)
105
Dynaaminen taajuusvaste (Hz)
20 Hz – 20 kHz
Impedanssi (ohmia)
16
Charging Case Weight (oz)
1.2
Earpiece Weight (oz)
0.3
Latauskotelon paino (g)
35.1
Kuulokekapselin paino (g)
7.6
Bluetooth-versio
5.2
Bluetooth profiilit
A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth-taajuus
2.4 GHz - 2.4835 GHz
Bluetooth-lähettimen modulaatio
GFSK, π/4 DQPSK, 8DPSK
Bluetooth-lähettimen teho
<13 dBm
Latausaika (tuntia, kun akku on tyhjä)
2
Maksimi toistoaika (tuntia)
32
IPX-luokitus
IP54
Charging cable
Kyllä
Päästää läpi ympäristön äänet
Kyllä
Sisäänrakennettu mikrofoni
Kyllä
Hands-free-puhelut
Kyllä
TalkThru-monitoimipainike
Kyllä
Kosketusohjaimet
Kyllä
Aidosti langaton
Kyllä
Water Resistant
Kyllä
Latauskotelo
Kyllä
Pikalataus (5 min = 1 tunnin soittoaika)
Kyllä
Ladattava akku
Kyllä
Bluetooth
Kyllä

Syvät bassot antavat potkua arkeen

Pidä soundi aina mukanasi. Basso, jonka tunnet kehossasi, jopa 32 tunnin akunkesto ja hyvin istuva, mukava avorakenne sekä roiske- ja pölysuojaus tekevät JBL Wave Flex -nappikuulokkeista täydellisen valinnan päivittäiseen menoon. Kuljetpa sitten kaupungin kaduilla tai vietät aikaa rannalla rentoutuen, handsfree-stereopuhelusi ovat aina kristallinkirkkaita ja Smart Ambient -teknologia pitää sinut tietoisena ympäristöstäsi. Kun tarvitset lisätehoa, saat pikalatauksella kaksi lisätuntia virtaa vain 10 minuutissa.

Ota kaikki irti soittolistoistasi korkealaatuisella äänentoistolla hyvin istuvista ja luotettavista nappikuulokkeista, joissa on 12 mm:n kuuloke-elementit ja JBL Deep Bass Sound.
JBL Wave Flex -kuulokkeiden ergonominen, avorakenteinen muotoilu on niin mukava, että saatat unohtaa kuulokkeiden olevan korvissasi. Avorakenteisen muotoilun ansiosta voit nauttia täysipainoisesta kuunteluelämyksestä sulkematta korvakäytävääsi.
JBL Wave Flex -kuulokkeet tarjoavat äänentoistoa koko päiväksi nappikuulokkeiden 8 tunnin ja latauskotelon 24 tunnin akunkestolla. Kun tarvitset enemmän virtaa, saat pikalatauksella kaksi lisätuntia virtaa vain 10 minuutissa.
Smart Ambient -teknologian ansiosta kuulet kaiken, missä tahansa liikutkin. Kun haluat pitää tauon kuuntelusta nopeaa keskustelua varten, TalkThru -tekniikan avulla kuulet välittömästi itsesi ja muut ihmiset ottamatta kuulokkeita pois korvistasi. Voit myös käyttää Ambient Aware -tilaa, jotta voit samanaikaisesti kuunnella musiikkia ja pysyä tietoisena ympäristöstäsi.
Kun soitat handsfree-stereopuheluita liikkeellä ollessasi, VoiceAware-ominaisuuden avulla voit säätää sitä, kuinka paljon omaa ääntäsi kuulet puhuessasi muiden kanssa.
IP54-sertifioidut nappikuulokkeet ja IPX2-latauskotelo ovat roiske- ja pölysuojatut koko päivän aina rannalta ralliradalle.
Kuuntele vaikka koko päivä – omalla tavallasi. Valitse haluamasi ääni erityisellä sovelluksella ja muunna JBL Wave Flexit täydelliseksi äänentoistokumppaniksesi.

FAQs & How-Tos

4 results
  • As with all in-ear headphones, our range of True Wireless Stereo headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing. Remember to clean the charging points on the headphones and inside the charging case.

    If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). This should remove the wax and resolve the volume/balance issues.

    cleaning-earstick-tip 
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • This headphone is supported by the My JBL Headphones App.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +358 972 522 301

Monday - Friday: 10:00 - 18:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 10.00-19.00
Saturday - Sunday: 11:00-17:00