SDA-8300
The SDA-8300 is a versatile 8-channel Class D power amplifier designed to deliver maximum power while taking up minimal rack space. Each channel is rated to deliver 300W into 8 ohms and adjacent channel pairs can be bridged to deliver 600W into 8 ohms. This flexible channel configuration makes this an ideal amplifier to power LCR, surround, and height channel loudspeakers as well as in-wall subwoofers in JBL Synthesis immersive audio systems. Powerful built-in DSP allows for custom loudspeaker tuning and full external control allows for complete and easy system integration.
Product Specifications
General Specifications
| Cooling | Continuously variable speed forced air, front to back airflow |
|---|---|
| Maximum Fan Noise (dBA SPL @ 1M) | 47 |
| Required AC Mains (±10%) | 100Vrms - 240Vrms ~50/60Hz |
Audio Specifications
| Rated Output Power Into 8 Ohms | 300W |
|---|---|
| Rated Output Power Into 4 Ohms | 300W |
| Rated Output Power Into 2 Ohms | 150W |
| Bridged Output Power Into 8 Ohms | 600W |
| High Impedance | 70-Volt & 100-Volt Capable |
| Frequency Response (8Ω, 20Hz - 20kHz) | ±0.25dB |
| Analog Input Signal to Noise Ratio | 104 dB |
| BLU link Input Signal to Noise Ratio (A-Weighted) | >108dB |
| Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) | 0.35% |
| Damping Factor (20Hz to100Hz) | >1000 |
| Input Impedance (nominal balanced, unbalanced) | 10kΩ, 5kΩ |
| Maximum Input Level before Compression (Low Gain Mode) | (+)20dB |
| Load Impedance Stereo/Dual Mode | 2Ω - 16Ω; 70Vrms and 100Vrms |
| Load Impedance Bridge Mono | 4Ω - 16Ω; 140Vrms and 200Vrms |
Dimension Specifications
| Width | 19 in. (48.3 cm) |
|---|---|
| Height | 3.5 in. (8.9 cm) |
| Depth | 14.25 in. ( 35.63 cm) |
| Weight | 23.5lbs (10.66kg) |
Speaker Specifications
| Frequency Response | +/-0.25db |
|---|---|
| Signal-to-Noise Ratio | >108db |
| Total Harmonic Distortion (THD) | <0.35% |
| Power Requirements (+/-10%) | 100VAC – 240VAC 50/60hz |
Control Connect Specifications
| Eight balanced line inputs | 6-pin block connectors (Two channels per block connector) |
|---|---|
| Eight speaker level outputs | Terminal strip (accepts up to 10AWG wire) |
| BLU link Input/Output | RJ-45 (Category 5e) |
| Ethernet | RJ-45 (Category 5e) |
| Programmable General Purpose Input/Output Ports | " 3-pin block connector (Enables SLEEP mode and monitoring of AMP STATUS)" |
| Power Connector | 15A IEC |
Documents & Downloads
Quick Start Guide
Gallery
Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00