JBL E45BT
Langattomat on-ear-kuulokkeet
Sold from 2013 until now
Getting started with your JBL E45BT
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Elementin koko (mm)
- 40
- Elementin herkkyys @ 1kHz/1mW (dB)
- 96
- Dynaaminen taajuusvaste (Hz)
- 20 Hz - 20 kHz
- Impedanssi (ohmia)
- 32
- Elementtien määrä per korva
- 1
- Kuulokejohdon pituus (cm)
- 133.4
- Kuulokejohdon pituus (ft)
- 4.4
- Paino (g)
- 186.0
- Paino (oz)
- 6.6
- Bluetooth profiilit
- HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.4
- Bluetooth-taajuus
- 2.402GHz-2.48GHz
- Bluetooth-lähettimen modulaatio
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth-lähettimen teho
- 0-4 dbm
- Bluetooth-versio
- 4.0
- Latausaika (tuntia, kun akku on tyhjä)
- 2.0
- Maksimi musiikintoistoaika ANC pois päältä (tuntia)
- 16.0
- Maksimi toistoaika (tuntia)
- 16.0
- Puheaika (tuntia)
- 16.0
- Bluetooth
- Kyllä
- Sisäänrakennettu mikrofoni
- Kyllä
- Irrotettava johto
- Kyllä
- Pehmustettu sanka
- Kyllä
- Voidaan taittaa kokoon helppoa säilytystä varten
- Kyllä
- Hands-free-puhelut
- Kyllä
- JBL Signature Sound
- Kyllä
- Multipoint-yhteys
- Kyllä
- On-ear
- Kyllä
- Over-ear
- Kyllä
- Ladattava akku
- Kyllä
- Kauko-ohjain korvakupeissa?
- Kyllä
- Pikalataus (5 min = 1 tunnin soittoaika)
- Ei
- Langattomat
- Kyllä
Ääni joka iskee tajuntaasi, kun olet tien päällä.
JBL E45BT langattomat on-ear-kuulokkeet tuovat tunnusomaisen JBL-äänentoiston korvillesi. E45BT on yksi monipuolisimmista koskaan julkaisemistamme tuotteista ja sisältää 16 tunnin akun keston, innovatiivisen ja tyylikkään pehmustetun sangan, sekä ergonomisen on-ear muotoilun. Tämä tarkoittaa sitä, että viihde jatkuu ja hauskuuskerroin kasvaa mitä tahansa teetkin - työskennellessä, liikenteessä tai vain liikkuessasi kaupungilla. Voit vaihtaa saumattomasti esimerkiksi kannettavan laitteen musiikista puhelimeen saapuvaan puheluun, jolloin sinulta ei koskaan jää puhelu vastaamatta. Tyylikäs ulkonäkö, värivalikoima sekä kaukosäätimellä ja mikrofonilla varustettu irrotettava johto takaavat, ettet kertakaikkiaan malta olla ilman E45BT-kuulokkeita. Ne piristävät päivääsi väreillä ja nautinnolla.
FAQs & How-Tos
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
Yes. Our E series headphones are made with synthetic protein leather.Was this helpful? Thank you for your feedback!
-
Yes. The E45/E55BT headphones have the ability to pair and connect to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
Yes, the E45BT headphones also have an detachable audio cable that you can plug into the headphones. The plug is located at the bottom of the right ear cup.Was this helpful? Thank you for your feedback!
-
Yes, the E45BT headphones allow you to switch seamlessly from your music on your portable device to your phone. The controls are located on the Right ear cup which features your volume control and pause and play which is located in the center of the controls. The center button will allow you to answer and hang up phone calls .Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
With the headphones switched ON, press and hold the Volume + and Volume - buttons for more than 5 seconds. The LED blinks two colors, and now you have reset to factory settings.Was this helpful? Thank you for your feedback!
-
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. If you are attempting to pair to a different device, make sure headphones are turned on, and press and hold the Bluetooth button located at the bottom of the right ear cup. The headphone should display on your new device within 3-5 seconds on your list of discoverable devices.Was this helpful? Thank you for your feedback!
-
While charging, the charging indicator diode is lighting constantly. When charging is complete, the light goes out.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00
