JBL Tune 225TWS

JBL Tune 225TWS

Aidosti langattomat nappikuulokkeet

Sold from 2020 until now

Getting started with your JBL Tune 225TWS

Getting started with your JBL Tune 225TWS

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Elementin koko (mm)
12
Elementin herkkyys @ 1kHz/1mW (dB)
105
Dynaaminen taajuusvaste (Hz)
20 Hz – 20 kHz
Impedanssi (ohmia)
32
Elementtien määrä per korva
1
Latauskotelon paino (g)
49.7
Charging Case Weight (oz)
1.7
Kuulokekapselin paino (g)
9.8
Earpiece Weight (oz)
0.4
Bluetooth profiilit
A2DP 1.3, AVRCP 1.5, HFP 1.7
Bluetooth-taajuus
2.402 GHz – 2.48 GHz
Bluetooth-lähettimen modulaatio
GFSK, π/4DQPSK, 8DPSK
Bluetooth-lähettimen teho
0 - 12dbm
Bluetooth-versio
5.0
Charging case battery life (max hours)
20
Latausaika (tuntia, kun akku on tyhjä)
2
Maksimi toistoaika (tuntia)
5
Bluetooth
Kyllä
Charging cable
Kyllä
Puheääniavustaja
Kyllä
Sisäänrakennettu mikrofoni
Kyllä
Latauskotelo
Kyllä
Hands-free-puhelut
Kyllä
JBL Pure Bass -ääni
Kyllä
Ladattava akku
Kyllä
Kauko-ohjain korvakupeissa?
Kyllä
Aidosti langaton
Kyllä
Langattomat
Kyllä

Pysy yhteyksissä langattomasti.

Tunne olevasi yhtä musiikkisi ja maailmasi kanssa. Ilman rajoittavia johtoja voit nauttia lempimusiikistasi ja JBL Pure Bass -äänestä. JBL TUNE 225TWS -nappikuulokkeet luovat saumattoman yhteyden musiikkiin ja puheluihin.  Avaa vain kotelo ja ala kuunnella, sillä JBL TUNE 225TWS -nappikuulokkeet muodostavat välittömästi laiteparin laitteesi kanssa, ja Dual Connectin avulla voit käyttää kumpaa tahansa kuulokenappia tai molempia. Kuuntele mukavasti pidempään jopa 25 tuntia kestävän akun avulla. Löydä eri värivaihtoehtojen joukosta omaan tyyliisi sopivat JBL TUNE 225TWS -nappikuulokkeet.

JBL on huolehtinut festivaalien ja konserttien äänentoistosta ympäri maailmaa jo vuosikymmenten ajan. Nyt voit antaa JBL:n herättää oman maailmasi henkiin mahtavalla Pure Bass -äänellä.
Johdot voivat sotkeutua laukussa, tarrautua takkiin tai juuttua hiuksiin – eli todella olla tiellä. Aidosti langattomien JBL TUNE 225TWS -nappikuulokkeiden ansiosta saat kokea täydellisen johdottoman vapauden.
Jopa 25 tunnin akkukeston ansiosta voit kuunnella musiikkia aamusta iltaan. Anna yksityiskonserttisi jatkua niin kauan kuin pysyt itse menossa mukana.
Vasen korva, oikea korva vai molemmat korvat? Dual Connectin etu on se, että voit valita, haluatko nauttia musiikista tai käydä puhelinkeskusteluja saumattomasti vain yhdellä korvanapilla vai molemmilla. Tämän ansiosta kuulokkeet myös kestävät käytössä pidempään, sillä voit jättää toisen korvanapin latautumaan samalla kun käytät toista.
Googlen Fast Pair -parinmuodostuksen ansiosta Tune 225TWS -kuulokkeet yhdistyvät Android-laitteeseesi samalla hetkellä, kun otat ne pois kotelosta. Voit myös yhdistää useita laitteita pelkästään napauttamalla niiden näyttöä.
Mikä toimii sinulle? Kuuden eri värin joukosta löydät täydelliset nappikuulokkeet juuri sinun persoonaasi.
Jokainen yksityiskohta on suunniteltu huolellisesti. JBL TUNE 225TWS -nappikuulokkeiden latauskotelo on suunniteltu yhtä huolellisesti kuin itse kuulokkeetkin: sen muotoon on saatu inspiraatio jokikivestä, sen runko on pehmeä, ja ylös ponnahtavan kaarevan kannen avulla kuulokkeisiin pääsee helposti käsiksi.

FAQs & How-Tos

10 results
  • As with all in-ear headphones, our range of True Wireless Stereo headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing. Remember to clean the charging points on the headphones and inside the charging case.

    If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). This should remove the wax and resolve the volume/balance issues.

    cleaning-earstick-tip 
  • This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • 1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
  • This headphone does not feature volume control. You must manually control volume from your device.
  • The two earpieces of your TWS headphones should normally be connected together without issue.  However, if they are no longer paired to each other, please follow these steps, in order.
    1. Forget/unpair the headphones on your device.
    2. Manually pair the two earpieces together following the "Manual Pairing Left & Right" instructions in your Owner's Manual/Quick Start Guide.
    3. Pair the headphones to your device and see if this resolves the problem.
    4. If manual pairing does not fix the problem, forget/unpair the headphones on your device again.
    5. Initiate a Product Reset to reset the earbud’s Bluetooth connection.
      • Note that RESET will wipe all previous settings and pairings, so it will be necessary to pair your headphones with your devices again
      • Follow the Product Reset instructions in your Owner's Manual/Quick Start Guide.
      • Manually pair the 2 buds together again, as you did in step 2.  This additional step is necessary because, by default, the reset procedure does not automatically pair the two ear pieces together, but it does wipe all previous settings and resets the internal processor, so it is necessary to manually pair the two ear pieces together again.
      • Pair the buds to your Source Device.
  • This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +358 972 522 301

Monday - Friday: 10:00 - 18:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 10.00-19.00
Saturday - Sunday: 11:00-17:00