POWER P26T
1 inch (25mm) High-bandwidth edge-driven textile dome tweeter with I-Mount.
Vendido desde 2008 hasta ahora
| Producto predecesor: | POWER P332 |
|---|---|
| Hecho en: | China |
Empezando con su POWER P26T
Registre su producto
¿Es propietario de este producto? ¡Regístrelo aquí! Y reclame su garantía o servicio fácilmente
Regístrese ahoraDocumentos y descargas
Especificaciones del producto
- Series
- Power Series
- Size
- 1
- Recommended Amplifier Power (RMS)
- 60 Watts
- Power Handling (peak)
- 180 Watts
- Frequency Response
- 2.5kHz (±3dB) – 23kHz (±3dB)
- Sensitivity (1 watt @ 1 meter)
- 94dB
- Nominal Impedance
- 4 ohms
- MSRP U.S.
- $119.95 per pair
- Power Handling (Peak)
- 180W
- Sensitivity
- (2.83V@1m) 94dB
- Frequency Response
- 2.5kHz–23kHz
- Power Handling (RMS)
- 60W
- Nominal Impedance
- 6 ohms
- Mounting Depth (mm)
- 17
- Mounting Depth (in)
- 11/16
- Mounting Cutout Diameter Tweeter (mm)
- 47
- External Diameter Tweeter (mm)
- 54.5
- Mounting Cutout Diameter Tweeter (in)
- 1-7/8
- External Diameter Tweeter (in)
- 2-3/16
- Mounting Depth
- 1-3/16 inch
- Cutout Dimensions
- 1-3/4 inch
- Controls/Adjustments
- None
- Crossover Frequencies
- Onboard
- High-Frequency Transducer
- 25mm (1") edge-driven My-Ti™ dome, pivoting
1 inch (25mm) High-bandwidth edge-driven textile dome tweeter with I-Mount.
Forget the commonly used miniatures. The JBL® brand uses full edge-driven topology, textile-
The JBL® P26T has tweeter-level control. Use the simple switch to set the tweeter output level
You’ll have 60 watts RMS each and 180 watts of peak power handling, with tweeter protection
Nothing is over- or under-emphasized. With a frequency response of 2.5kHz to 23kHz, the JBL®
The I-Mount™ system allows for more precise imaging and simplifies tweeter installation with
Imágenes y vídeos
¿No encuentras lo que buscas?
Envíanos un correo electrónico
Estamos aquí de lunes a domingo para atenderle lo más rápido posible!
Envíanos un correo electrónico