JBL PartyBox Encore 2
Portable party speaker with powerful sound, a dynamic lightshow, wireless digital mic, up to 15 hours playtime, replaceable battery and a flexible grab-and-go handle.
Documentos y descargas
Especificaciones del producto
- Transducers
- 1 x 5.25 inch (135mm) woofers, 2 x 1 inch (25mm) Dome tweeters
- Output power
- 100W RMS (IEC60268)
- Power input
- 100 - 240V ̴ 50/60 Hz
- Frequency response
- 40Hz - 20kHz (-6dB)
- Signal-to-noise ratio
- > 80dB
- Wireless mic spec:
- Carrier frequency
- 2400~2480MHz
- Working Range
- <=30M (100'')
- Frequency Response
- 50Hz~15KH
- Signal-to-Noise
- >59dBA
- Transimitting Power
- <10dBm (EIRP)
- Product dimensions (W x H x D)
- 319.5 mm x 338.6 mm x 263 mm ( 12.58" x 13.33" x 10.35 ")
- Net weight
- 6.4 kg / 14.11 lbs
- Packaging dimensions (W x H x D)
- 385 mm x 365 mm x 350 mm / 15.16" x 14.37" x 13.78 "
- Gross weight
- 9.15 kg / 20.172 lbs
- USB format
- FAT16, FAT32
- Bluetooth® version
- 5.4
- Bluetooth® profile
- A2DP V1.4, AVRCP V1.6(SW), TMAP1.0, PBP1.0
- Bluetooth® transmitter frequency range
- 2.402GHZ~2.480GHZ
- Bluetooth® transmitter power
- ≤ 16 dBm (EIRP)
- Bluetooth® transmitter modulation
- GFSK, π/4 DQPSK, 8DPSK ,BLE1M, BLE2M
- USB Supported formats
- .MP3, .WAV, .WMA, .FLAC (Not for EMEA SKU)
- Input Sensitivity:
- Aux-In
- 370 mV RMS (3.5mm connector)
- Mic-In
- 20 mV RMS
- Guitar-In
- 100 mV RMS
- Bluetooth/USB input
- -9dBFS
- Battery type
- JBL Battery 200, Li-ion Battery(7.4V/4722mah)
- Battery charge time
- < 3.5 hours (Speaker off mode)
- Music play time
- up to 15 hours (varies by volume level and audio content)
- Cable type
- AC power cable (type varies by regions)
- Cable length
- 2.0m / 6.6 ft
- USB charge out
- 11V / 2A (Max) (Speaker off mode)
- Mic Rechargeable battery
- 240mAh 3.7V Li-ion battery
- Mic playtime
- Up to 10 hours (varies by volume level and audio content)
Bring the star power to your next party
Power up the JBL PartyBox Encore 2 and let the good times roll. With this portable speaker, you'll want to play DJ at every event, with smooth JBL Pro Sound, a light show to fit the mood, and a mic for your emceeing pleasure. Feel that extra oomph in your chest from the epic highs and deep lows, whether your playing a new pop ballad or going with a classic slow jam. Once you’ve nailed the soundcheck, it’s time to turn up the ambiance with a light show that grooves to your beats. Ready to run the show? Grab the digital wireless mic and become your own emcee or karaoke host! You can also customize your sound with adjustable echo, bass, and treble controls to make sure you sound just right. From open rooftops to crowded basements, the JBL PartyBox Encore 2 knows how to adapt, with its grab-and-go handle and IPX4 splash-proof design. What’s better than one JBL PartyBox Encore 2? Two! Pair them up for true stereo vibes or link with other JBL Auracast™-enabled speakers for an even wilder dance party. And if 15 hours of nonstop jams isn’t enough, grab a spare rechargeable battery to keep the music going. Make the vibes immaculate with the JBL PartyBox app, where you can control your playlist, add fun sound effects, and pick the perfect light show mood—all while you’re doing the worm on the dance floor. Whatever the occasion, the JBL PartyBox Encore 2 knows how to bring all the feels.
Preguntas frecuentes y procedimientos
-
Es posible parear dos altavoces JBL PartyBox mediante el modo TWS (True Wireless Stereo). Un botón (izdo. y dcho.) en la parte trasera de los altavoces se utiliza para asignar el canal correcto a los altavoces después de que se realiza el pareado.
Para activar el modo TWS, mantenga presionado el botón de Bluetooth en el primer altavoz hasta que suene un timbre de notificación, cerca de cinco segundos. Luego mantenga presionado el botón de Bluetooth en el segundo altavoz hasta que suene el timbre de notificación. Ahora está activado el modo TWS. Para desactivar el TWS, mantenga presionado el botón de Bluetooth en cualquiera de los altavoces, o apague uno de los altavoces.
Tenga en cuenta: para lograr el modo TWS, el altavoz debe ser el mismo modelo con la excepción del PartyBox 200 y PartyBox 300, que pueden parearse mediante TWS. No puede llegar al TWS con un PartyBox 1000 y un PartyBox 300. No puede lograr el modo TWS con un PartyBox 100 y PartyBox 200.¿Te ha resultado útil? ¡Gracias por tus comentarios!
Imágenes y vídeos
¿No encuentras lo que buscas?
Contacte con Nosotros
Si necesita atención con respecto al soporte del producto o garantías, contáctanos ya.
OBS: Si compraste con un minorista o tienda web, le recomendamos que se comunique con el lugar de compra, ya que ellos podrán informarle sobre sus opciones de garantía.