JBL Link Music
|Transducer||1 x 64 mm|
|Udgangseffekt||1 x 20W|
|Signal til støj-forhold||>80 dB|
|Understøttede lydformater||HE-AAC, LC-AAC, MP3, Vorbis, WAV (LPCM), FLAC, Opus|
|Mål (Ø x H)||112 x 134 mm|
Control Connect Specifications
|Frekvensområde for Bluetooth-transmitter||2402 − 2480MHz|
|Bluetooth-sendemodulation||GFSK, π/4 DQPSK, 8DPSK|
|Frekvensområde for 5G wi-fi-sender:5,150 - 5,350GHz, 5,470 - 5,725 GHz, 5,725 - 5,825 GHz|
|5G wi-fi-sendeeffekt||<20dBm (EIRP)|
|5G wi-fi-modulation||OFDM, BPSK, QPSK, 16QAM, 64QAM, 256QAM|
|5G wi-fi-netværkskompatibilitet||IEEE 802.11 n/ac|
|Frekvensområde for 2,4G wi-fi-sender||2412 – 2472MHz (2.4GHz ISM Band, USA 11 kanaler, Europa og andre 13 kanaler)|
|2,4G wi-fi-sendeeffekt||<20dBm (EIRP)|
|2,4G wi-fi-modulation||OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM|
|2,4G wi-fi-netværkskompatibilitet||IEEE 802.11b/g/n|
|Trådløst netværk||802.11a/b/g/n/ac (2.4/5GHz)|
Documents & Downloads
What’s in the Box
- 1 x Link Music
- 1 x strømkabel
- 1 x sikkerhedsark
- 1 x lynguide
FAQs & How-Tos
When trying to set up my speaker with the Google Home app, I get a message that says “Device needs to be activated before setup”. How do I proceed?If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
When using the Device Utility app to set up my speaker, my Wi-Fi network is not appearing in the list. How can I connect to my Wi-Fi network?If the network does not appear, you can manually type in the network name (SSID) and password to connect.
I have connected my speaker using the Device Utility app, but the Google Home app cannot find the speaker. What should I do?Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
How to stream music with your Apple device
Our new JBL Link Music and Link Portable both support Apple AirPlay 2. Pick up your Apple device, use your favorite music streaming service, and connect to the JBL speaker! Please note: before using Apple AirPlay 2, you will need to install it on your WiFi network, either using the Google Home app or Apple Home app ( your choice! ).
I am trying to use Bluetooth, but it is not working after the setup.To use Bluetooth, you must continue the setup in the Google Home app first.
The Bluetooth feature requires a Google account sign-in before it is enabled.
Can the speaker be used with Bluetooth without setting up Voice Assistant?
JBL Playlist: Yes, it can be used with Bluetooth out of the box, and also Chromecast (setup is done via Google Home, but speaker does not have Google Assistant built-in) JBL Link Bar: Yes, it can be used with Bluetooth and Chromecast after setting the bar up with a Google account - choosing not to activate the Google Assistant. JBL Link Music: No, this speaker requires setup via Google Home JBL Link Portable: No, this speaker requires setup via Google Home JBL Link 10, 20 and Link View: No, these speakers requires setup via Google Home Harman Kardon Citation series: No, this speaker requires setup via Google Home Harman Kardon Allure: Yes, Bluetooth is available from factory settings. Every time it is powered on and off, the speaker will say "Now in setup mode, follow the instructions in the Harman Kardon Alexa App." Harman Kardon Allure Portable: Yes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards. Harman Kardon Astra: Yes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards.