JBL BAR 9.1 True Wireless Surround with Dolby Atmos® - Black - Hero JBL BAR 9.1 True Wireless Surround with Dolby Atmos® - Black - Front JBL BAR 9.1 True Wireless Surround with Dolby Atmos® - Black - Back
JBL BAR 9.1 True Wireless Surround with Dolby Atmos® - Black - Hero

JBL BAR 9.1 True Wireless Surround with Dolby Atmos®

JBL Bar 9.1 soundbar bringer lydoplevelsen fra en biograf ind i dit hjem med to aftagelige surroundhøjttalere og den ekstra energi fra Dolby Atmos® og DTS: X ™ 3D-lyd. Med 820 watt total systemeffekt kan du nyde enhver Oscar-værdig præstation gennem kraftfuld, krystalklar lyd. Skru op for subwooferen på 10 tommer for pulserende bas, eller skru ned for den, og slap af med trådløs musikafspilning via Chromecast og AirPlay. Fordyb dig i det seneste filmhit, eller genoplev din yndlingsfilm eller sportsscene. Den mest utrolige hjemmebiograf-lydoplevelse er her.

Product Specifications

General Specifications

Lydsystem 5.1.4 kanaler
Strømforsyning 100 - 240 V AC, ~ 50/60 Hz
Batterigenopladningstid 3 timer
Samlet højttalerudgang (maks. ved THD 1 %) 820 W
Soundbars udgangseffekt (maks. ved THD 1 %) 400 W
Surround-højttalers udgangseffekt (maks. ved THD 1 %) 2 x 60 W
Subwoofers udgangseffekt (Maks. @THD 1%) 300 W
Soundbar-enheder 4 × racetrack-enheder + 2 × opadvendte fuldskala-enheder + 3 × 0.75” (20mm) diskanter
Surround-enheder (pr. styk) opadvendte fuldskala-enheder + 0.75” (20mm) diskanter
Subwoofer-enhed 10”
Driftstemperatur 0 °C - 45 °C
Standby for soundbar (når alle trådløse forbindelser er deaktiveret) < 0.5 W
Standby i netværk (soundbar) < 6.0 W
Standby i netværk (subwoofer) < 2.0 W
Tid til standby <10minutter

Audio Specifications

HDMI-videoindgange 1
HDMI-videoudgang med eARC (enhanced Audio Return Channel) 1
HDMI HDCP-version 2.3
Maks. SPL 103dB
Frekvensområde 34Hz~20KHz
Audio inputs 1 Optical, Bluetooth, Chromecast, AirPlay2, USB

Dimension Specifications

884 x 62 x 120 mm (soundbar);
173 x 60 x 120 mm (aftagelig surroundhøjttaler pr. styk)
305 x 440 x 305 mm (subwoofer)
3,64 kg/ 8,0 lb (soundbar);
0,72 kg x 2 / 1,6 lb x2 (aftagelig surround.højttaler);
11,10 kg/ 24,5 lb (subwoofer)

Control Connect Specifications

USB-port Type A
USB-rating 5 V/ 500 mA
Understøttede flformater MP3
MP3 codec MPEG 1 lag 2/3, MPEG 2 lag 3, MPEG 2,5 lag 3
MP3 sampling-rate 16 KHz - 48 KHz
MP3 bitrate 80 kbps - 320 kbps
(USB-playback fås kun i den amerikanske version. For andre versioner er USB kun til service.)
Bluetooth-version 4.2
Bluetooth-profl A2DP V1.2, AVRCP V1.5
Bluetooth-frekvensområde: 2402 MHz - 2480 MHz
Bluetooth maks. sendekapacitet: 13 dBm (EIRP)
Modulationstype GFSK, π/4 DQPSK, 8DPSK
Wi-f-netværk: IEEE 802.11 a/b/g/n/ac (2,4 GHz/5GHz)
2,4 G wi-f-frekvensområde 2412 - 2472MHz (2,4 GHz ISM-bånd, USA 11 kanaler, Europa og andre steder 13 kanaler)
2,4 G maks. wi-f sendekapacitet: 20 dBm (EIRP)
Modulationstype DBPSK, DQPSK, CCK, QPSK, BPSK, 16QAM, 64QAM
5G wi-f-frekvensområde: 5,15 - 5,35 GHz, 5,470-5,725 GHz, 5,725 - 5,825 GHz
5G maks. wi-f-sendekapacitet 22 dBm (EIRP)
Modulationstype QPSK, BPSK, 16QAM, 64QAM, 256QAM
5 G trådløs frekvensområde: 5725 ~ 5825 MHz
5G maks. sendekapacitet 13 dBm (EIRP)
Modulationstype QPSK
Please consult the documents for in-depth specs

Documents & Downloads

Videos

What’s in the Box

  • 1 soundbar
  • 2 aftagelige trådløse surroundhøjttalere
  • 1 trådløs subwoofer
  • Fjernbetjening med 2 batterier
  • Strømkabler (op til 8 stk. afhængigt af områdets konfiguration)
  • 1 HDMI-kabel
  • 2 L-formede vægbeslag (soundbar) + 2 U-formede vægbeslag (til surroundhøjtalere) sæt med skruer
  • Lynguide
  • Garantikort
  • Sikkerhedsark
  • Kun for visse regioner
JBL BAR 9.1 True Wireless Surround with Dolby Atmos® - What's in the Box

FAQs & How-Tos

What is the length?
JBL Bar 9.1 is 884 mm (without the surrounds in charging position). Surrounds add approx. 160 mm on each side, in charging position.
How to connect to your WiFi network
You can enjoy streaming your favorite music over WiFi to your JBL BAR 9.1 Surround by adding it to your network. Turn on your soundbar. Download the Google Home app to your phone. Enable Bluetooth and Location services on your device. Open Google Home app Follow the instructions given in the app. You are now connected to your WiFi network and can enjoy streaming music to your system. The soundbar will now be able to automatically update, to make sure the performance is the best at all times.
What are the benefits of having the soundbar connected to WiFi?
You are able to enjoy wireless streaming via Chromecast and Airplay from your devices. This will also give you the opportunity to do multi-room playback. At the same time, the product will be able to automatically update, when there is software improvements available.
My sound bar's dialogue is too low/the surround effects are too loud.
When listening to multichannel content you may find that your dialogue isn’t coming in as clear, or your surround effects are louder than you’d like. Our sound bars have a feature called ‘Smart Mode’ that implement our unique JBL Surround Sound as well as other tailored EQ settings. While these are great for content that needs a helping hand, for some multi-channel content it can be overwhelming. If you feel like you’re running into this, you can disable ‘Smart Mode'.

To disable the smart mode, do the following:
1. On the remote control, press and hold MUTE for more than 3 seconds. Press Volume Up (+)
--> Current mode is displayed. "ON SMART MODE": The smart mode is enabled. 
2. Repeat Step 1.
--> You Switch to another mode. "OFF SMART MODE": The standard mode is enabled
--> Next time you switch on the sound bar, the smart mode is enabled again automatically. 
I have connected my speaker using the Device Utility app, but the Google Home app cannot find the speaker. What should I do?
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
 
How to restore factory default settings on your device
With our JBL BAR 9.1 Surround there is two types of resets, one is to reset the WiFi settings and last one is to restore factory default settings. Let us walk through each one of them. Resetting WiFi settings Turn on your JBL BAR 9.1 Surround. Press and hold POWER button down for more than 10 seconds. All of your WiFi configuration is lost and you need to reinstall it again. Use the Google Home app to install the device on your WiFi network. Resetting to Factory default settings Turn on your JBL BAR 9.1 Surround Press and hold POWER and SOURCE button for 3 seconds. Your device is now reset. You can now start allover with installing your BAR 9.1 Surround.
How can I play content with Dolby Atmos and DTS:X sound?
To play the surround sound with DOLBY ATMOS or DTS:X, connect your Blu-ray player or other digital device to the HDMI input connector on the soundbar. If the TV support Dolby ATMOS, served over HDMI ARC, just make sure it is selected in the TV setting menu. To select the most suitable amount of sound effect of DOLBY ATMOS and DTS:X, press on the remote control ATMOS level button, to switch between MID, HIGH, LOW or OFF. Note: If your TV has an eARC HDMI input, you can connect your Blu-ray player or other digital device to the HDMI IN connector on the TV.
When trying to set up my speaker with the Google Home app, I get a message that says “Device needs to be activated before setup”. How do I proceed?
If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
 
My wireless surround speakers are experience sound interference.

If you find yourself encountering audio dropouts or interference coming from your surround speakers when they are not docked on the main unit, here are a couple of tips to try to remedy that.

1. Try moving any wireless routers that are near the sound bar further away.

2. Reboot router so it can auto select a new frequency channel, since the sound bar and router may be on the same channel resulting in audible interferences

3. Re-position the surround speakers so they are closer to the main unit.

4. Re-calibrate the surround speakers

5. Adjust the volume on the sound bar and gradually raise the volume, if driven to hard the sound bar speakers can distort

How to perform sound calibration?

Prerequisites:
− Make sure that your room is quiet;
− Make sure that the soundbar and the two detachable rear speakers are fully in sight of each other, without obstacles in between.
− Make sure that the left and right rear speakers are properly placed, the L speaker on the left and the R speaker on the right.

The calibration is done in two steps: Listening zone & Speaker position

Calibrate the listening zone

1. Place the detachable rear speakers beside your seating position.


2. On the remote control, press and hold HDMI until “1-CALIBRATION” is displayed on the soundbar.
→ Countdown starts from 5 to 1.
→ Calibration tone is heard. Audio calibration starts.
→ “CALIBRATING”: Calibration ongoing.
→ “1-DONE”: Calibration of the listening zone is completed successfully.

Calibrate the speaker position

1. Place the detachable rear speakers in your desired location.

2. On the remote control, press and hold HDMI until “2-CALIBRATION” is displayed on the soundbar.
→ Countdown starts from 5 to 1.
→ Calibration tone is heard. Audio calibration starts.
→ “CALIBRATING”: Calibration ongoing.
→ “2-DONE”: Calibration of the speaker position is completed successfully.
3. To select suitable surround sound level, press repeatedly to switch between high, low or middle (default).

NOTES:
− During calibration, all buttons on the remote control are disabled except for STANDBY and HDMI.
− “SETUP FAILED” is displayed if calibration failed.

When using the Device Utility app to set up my speaker, my Wi-Fi network is not appearing in the list. How can I connect to my Wi-Fi network?
If the network does not appear, you can manually type in the network name (SSID) and password to connect.
 
BAR 9.1 - battery status
The Mute+ATMOS combination button press to determine the Battery Status was originally designed for production line testing, not for consumer usage.  We determined that this testing method was inaccurate and began testing using specialized external equipment.  As of Software Version V21.13.11.80, the ability to check Battery Status inaccurately has been removed.

When charging the satellite speakers you can be confident that the Battery Status is 100% when the LED indicator goes  out.  As well, when the LED begins blinking red, you are at 20% and should recharge or plug in your speakers.
BAR 9.1: Software Update Release Notes
BAR 9.1
Software Update Release Notes
------------------------------------------------------------------------
Version:  V22.01.31.80
Release Date:  May 19, 2022
Release Media:  OTA (over the air) Automatic Upgrade and/or USB
Filename:  JBL Bar9.1 TWS ver 22.01.31.80.zip
  1. Fixed a grouping issue with other Chromecast built-in speakers (read below):
    1. 3rd party Chromecast built-in speakers using a Google SDK less than 1.52GM2 can not be grouped with 1st party Google speakers any longer. This update brings the Bar 9.1 up to 1.52GM2, which means once again, it can be grouped with 1st party Google speakers
  2. Software update resolves the issues with the "Google Home" app if you are using an Android phone (read below):
    1. Speakers with an SDK less than 1.52GM2 set up with a Google Pixel phone need to use a new, additional app called the "Device Utility app" to complete the Wi-Fi setup. After this update, customers may use the Google Home app as normal for Wi-Fi setup
  3. General software and performance improvements:
    1. Sometimes there was a 0.5sec audio drop during ARC streaming with PCM format, now improved!
    2. Import MTK patch to solve continuous distortion after connecting Apple TV to a Sony TV while playing PCM stream in eARC source.

Note:  This software upgrade is not applicable for JBL Bar 9.1 China version.
注意:此软件升级不适用于JBL Bar 9.1中国版。

------------------------------------------------------------------------
Version:  V21.23.11.80
Release Date:  June 8th, 2021
Release Media:  OTA (over the air) Automatic Upgrade and/or USB
Filename:  JBL Bar9.1 TWS ver 21.23.11.80.zip

1.    Improve calibration success rate in some cases.
2.    Improve compatibility of some “ATMOS” Netflix streaming content. 
3.    Improve LED Display messages.

Note:  This software upgrade is not applicable for JBL Bar 9.1 China version.
注意:此软件升级不适用于JBL Bar 9.1中国版。

------------------------------------------------------------------------
Version:  V21.13.11.80
Release Date:  April 8, 2021
Release Media:  OTA (over the air) Automatic Upgrade and/or USB
Filename:  JBL Bar9.1 TWS ver 21.13.11.80.zip
  • Improves Soundbar Optical, HDMI, and ARC Compatibility with TV.
  • Improves Bluetooth connectivity for mobile devices.
  • Improved LED Display Messages.
  • Bug fix to remove detachable speakers battery level checking due to imprecise readings.
NOTE:  This software update is not applicable to the JBL BAR 9.1 China version.

注意:此软件升级不适用于JBL Bar 9.1中国版。

 

Register your product

Do you own this product?
Register it here!
And claim your warranty or service easily

Register now

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00